JBL JRX218S

JBL Professional JRX218S 18-Inch Passive Subwoofer Instruction Manual

Model: JRX218S

1. Giriş

This manual provides essential information for the proper setup, operation, and maintenance of your JBL Professional JRX218S 18-Inch Passive Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The JRX218S is designed to deliver powerful low-frequency sound for various professional audio applications.

JBL Professional JRX218S 18-Inch Passive Subwoofer front view

Şəkil 1: Ön view of the JBL Professional JRX218S 18-Inch Passive Subwoofer.

2. Əhəmiyyətli Təhlükəsizlik Məlumatı

  • Təlimatları oxuyun: Gələcəkdə istinad üçün bu təlimatları saxlayın.
  • Xəbərdarlıqlara Diqqət Edin: Məhsulda və istismar təlimatlarında göstərilən bütün xəbərdarlıqlara əməl edin.
  • Su və nəm: Bu cihazı suyun yaxınlığında istifadə etməyin.
  • Təmizləmə: Yalnız quru parça ilə təmizləyin.
  • Havalandırma: Heç bir ventilyasiya açılışını bağlamayın. İstehsalçının göstərişlərinə uyğun olaraq quraşdırın.
  • İstilik: Radiatorlar, istilik registrləri, sobalar və ya digər aparatlar (o cümlədən) kimi istilik mənbələrinin yaxınlığında quraşdırmayın. ampistilik əmələ gətirən qaldırıcılar).
  • Güc Şnurundan Qoruma: Elektrik kabelini, xüsusən də tıxaclarda, prizlərdə və onların aparatdan çıxdığı yerdə gəzməkdən və ya sıxılmaqdan qoruyun.
  • Aksesuarlar: Yalnız istehsalçı tərəfindən müəyyən edilmiş əlavələrdən/aksesuarlardan istifadə edin.
  • Montaj: Yalnız istehsalçı tərəfindən göstərilən və ya aparatla birlikdə satılan araba, dayaq, ştativ, mötərizə və ya masa ilə istifadə edin. Arabadan istifadə edildikdə, sürüşmə nəticəsində xəsarət almamaq üçün araba/aparat birləşməsini hərəkət etdirərkən ehtiyatlı olun.
  • Xidmət: Bütün xidmətlər üçün ixtisaslı xidmət personalına müraciət edin. Aparat hər hansı şəkildə zədələndikdə, məsələn, enerji təchizatı kabeli və ya tıxacı zədələndikdə, maye töküldükdə və ya cihazın içərisinə əşyalar düşdükdə, cihaz yağışa və ya nəmə məruz qaldıqda, normal işləmədikdə xidmət tələb olunur. , ya da atılıb.

3. Qutuda nə var

Upon opening the packaging, verify that all components are present and in good condition:

  • JBL Professional JRX218S 18-Inch Passive Subwoofer
  • İstifadəçi Təlimatı (bu sənəd)

Hər hansı bir əşya əskik və ya zədələnmişsə, dərhal dilerinizlə əlaqə saxlayın.

4. Quraşdırma Bələdçisi

4.1 Yerləşdirmə

For optimal bass response, place the JRX218S subwoofer on a stable, flat surface. Corner placement can often enhance bass output, but experiment with different positions to find the best sound for your environment. Ensure adequate space around the unit for proper ventilation.

4.2 Əlaqələr

The JRX218S is a passive subwoofer and requires an external amplifier. Connect your amplifier's output to one of the SpeakON inputs on the rear panel of the subwoofer. The two SpeakON inputs are wired in parallel, allowing for easy daisy-chaining to another passive speaker or subwoofer. Ensure your amplifier can safely drive a 4-ohm load.

JBL Professional JRX218S 18-Inch Passive Subwoofer rear panel with SpeakON inputs

Figure 2: Rear panel showing SpeakON input connectors.

4.3 Dirəklərin quraşdırılması

The subwoofer features a top-mounted, cast aluminum 35 mm pole mount receptacle. This allows you to mount a mid/high speaker cabinet directly above the subwoofer using an optional SS3BK pole (sold separately), creating a compact and integrated full-range sound system. Ensure the pole and mounted speaker are stable and secure.

JBL Professional JRX218S 18-Inch Passive Subwoofer with a pole-mounted speaker

Figure 3: JRX218S with an optional pole-mounted speaker (speaker and pole not included).

5. Əməliyyat Təlimatları

5.1 Enerji ilə işləmə

The JRX218S has a continuous power handling capacity of 350 Watts and a peak power handling of 1400 Watts. It is crucial to match your amplifier's output to these specifications to prevent damage to the subwoofer. Overpowering or underpowering can lead to poor performance or component failure.

5.2 Impedance and Frequency Response

The subwoofer operates at an impedance of 4 ohms. Its frequency range is 34Hz-250Hz (-10dB), with a frequency response of 53Hz-250Hz (±3dB). This range is optimized for deep bass reproduction.

5.3 Sistem inteqrasiyası

When integrating the JRX218S into a larger PA system, use an external crossover to send only low-frequency signals to the subwoofer. This ensures efficient operation and prevents the subwoofer from attempting to reproduce frequencies outside its optimal range, which can lead to distortion and reduced performance.

6. Baxım

6.1 Təmizləmə

To maintain the appearance and performance of your subwoofer, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the carpet covering and internal components.

6.2 Enclosure and Grille

The rugged enclosure is constructed from 19 mm (.75 in) Medium Density Fiberboard (MDF) and covered in black carpet. The 18-gauge perforated steel grille protects the speaker components. Inspect these periodically for any signs of damage. Minor scuffs on the carpet can often be brushed out. Do not attempt to remove the grille unless you are qualified service personnel.

7. Giderme

ProblemMümkün SəbəbHəll
Səs Çıxışı Yoxdur
  • Incorrect wiring or loose connections.
  • Amplifier not powered on or faulty.
  • Crossover settings incorrect (no low frequencies sent).
  • Check all SpeakON connections between ampqaldırıcı və sabvufer.
  • Doğrulayın amplifier power and functionality.
  • Ensure your audio processor or mixer is sending low-frequency signals to the subwoofer output.
Təhrif edilmiş səs
  • Overdriving the subwoofer (too much power).
  • Ampqaldırıcı kəsmə.
  • Incorrect crossover frequency.
  • Reduce input level to the ampqaldırıcı və ya sabvufer.
  • Yoxlayın amplifier gain settings; ensure it's not clipping.
  • Adjust crossover to send only appropriate low frequencies to the subwoofer.
Weak or Insufficient Bass
  • Subwoofer phase issue.
  • Yanlış yerləşdirmə.
  • Amplifier not powerful enough.
  • Əgər sizin amplifier or processor has a phase switch, try inverting the phase.
  • Experiment with different subwoofer placements (e.g., closer to a wall or corner).
  • Özünüzü təmin edin amplifier provides sufficient power for the subwoofer's continuous rating.

8. Texniki spesifikasiyalar

XüsusiyyətDetal
ModelJRX218S
Dinamik növüPassiv sabvufer
Vuferin diametri18 düym
Power Handling (Continuous/Peak)350W / 1400W
Empedans4 Ohm
Tezlik Aralığı (-10dB)34Hz - 250Hz
Tezlik cavabı (± 3dB)53Hz - 250Hz
Maksimum Pik SPL133dB SPL
Bağlantı2 x SpeakON NL-4 (parallel)
Qoruyucu material19 mm (.75 in) MDF with black carpet covering
Barmaqlıq18-gauge perforated steel
Qütb dağıTop-mounted, cast aluminum 35 mm receptacle
Ölçülər (Y x G x D)23.5" x 20.3" x 22" (597 mm x 516 mm x 559 mm)
Çəki71 funt (32.5 kq)
JBL Professional JRX218S 18-Inch Passive Subwoofer dimensions diagram

Figure 4: Dimensions of the JRX218S subwoofer.

9. Zəmanət və Dəstək

9.1 Zəmanət Məlumatı

The JBL Professional JRX218S 18-Inch Passive Subwoofer comes with a manufacturer's limited warranty. Please refer to the warranty card included with your product or visit the official JBL Professional webətraflı şərtlər və şərtlər üçün sayt. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.

9.2 Müştəri dəstəyi

For technical assistance, service, or further inquiries, please contact JBL Professional customer support. Contact details can typically be found on the official JBL websaytda və ya məhsulun qablaşdırmasında.

© 2024 JBL Professional. Bütün hüquqlar qorunur.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.