1. Giriş
The Einhell GE-SP 3046 RB is a versatile multi-function pump designed for efficient rainwater collection and drainage. Its robust construction and intelligent features make it ideal for various applications around the home and garden, such as emptying rain barrels, tanks, or small ponds, and transferring water for irrigation. This manual will guide you through the proper use and care of your pump.
Figure 1.1: Einhell GE-SP 3046 RB Multi-function Pump with Accessories.
2. Təhlükəsizlik Təlimatları
Always read and follow all safety instructions before operating the pump.
- Enerji təchizatının səslə uyğun olduğundan əmin oluntage nasosun reytinq etiketində göstərilmişdir.
- Never operate the pump with a damaged power cable or plug. Have any damage repaired by a qualified electrician.
- Nasosu elektrik kabelindən tutaraq qaldırmayın və ya daşımayın.
- Uşaqları və icazəsiz şəxsləri əməliyyat zonasından uzaq tutun.
- Tez alışan, aşındırıcı və ya partlayıcı mayeləri vurmayın.
- Ensure the pump is fully submerged in water during operation to prevent dry running and overheating.
- Disconnect the pump from the power supply before performing any maintenance, cleaning, or when not in use.
- Pompanı dondan qoruyun.
3. Məhsulun Komponentləri
The Einhell GE-SP 3046 RB pump comes with several key components for its multi-functional use:
- Nasos vahidi: The main submersible pump with integrated motor and power cable.
- Üzən keçid: Automatically activates/deactivates the pump based on water level.
- Çevik Gooseneck: Allows for precise water discharge direction.
- Adjustable Aluminum Tube: Provides variable height for water extraction, especially from deep containers.
- Rain Stand: A stable base for positioning the pump and extension tube in rain barrels.
- Integrated Cable Rewind: Convenient storage for the power cable on the pump housing.
- Extension Tube Storage: Dedicated compartment on the pump housing for storing extension tubes.
Figure 3.1: Close-up of the Pump Unit.
Figure 3.2: Flexible Gooseneck.
Figure 3.3: Extension Tube Storage.
4. Quraşdırma
Follow these steps to set up your Einhell pump for operation:
- Assemble the Extension: If using the pump for rainwater collection from a barrel, attach the adjustable aluminum tube to the pump's outlet. Then, connect the flexible gooseneck to the top of the aluminum tube.
- Pompanı yerləşdirin: Place the pump unit into the water source (e.g., rain barrel, tank, or flooded area). Ensure the pump is stable and fully submerged. The minimum operating space required is approximately 40 x 40 cm, with a pump diameter of 24 cm.
- Adjust the Float Switch: The float switch controls the automatic on/off function of the pump. Adjust its position along the cable to set the desired minimum and maximum water levels for operation. A higher float position will require more water to activate the pump.
- Enerjiyə qoşulun: Plug the pump's power cable into a properly grounded electrical outlet. Ensure the outlet is protected by a residual current device (RCD) for safety.
Figure 4.1: Minimum Operating Space.
Figure 4.2: Adjusting the Float Switch.
5. işlək
Once set up, the Einhell GE-SP 3046 RB pump operates efficiently:
- Avtomatik əməliyyat: The pump will automatically start when the water level rises to the activation point set by the float switch and stop when the water level drops below the deactivation point.
- Əl əməliyyatı: For continuous operation regardless of water level (e.g., for complete drainage), the float switch can often be fixed in an 'on' position. Refer to the specific instructions for your float switch model.
- Water Transfer: Direct the flexible gooseneck or connected hose to where you want the water to be discharged. The pump can deliver up to 4,600 liters per hour with a maximum delivery height of 11 meters.
Figure 5.1: Pump in use for rainwater collection.
6. Baxım
Regular maintenance ensures the longevity and optimal performance of your pump:
- Təmizləmə: After each use, especially when pumping dirty water, rinse the pump with clean water. Remove any debris or foreign objects from the intake area at the bottom of the pump.
- Blokları yoxlayın: Periodically inspect the pump's intake and outlet for any blockages that could impede water flow.
- Kabel yoxlaması: Regularly check the power cable for any signs of wear, cuts, or damage.
- Qış saxlama: Before the first frost, completely drain the pump of all water to prevent damage from freezing. Store the pump in a dry, frost-free location.
7. Giderme
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Pompa işə düşmür | Enerji təchizatı yoxdur Float switch not activated Motor həddən artıq yüklənib/həddən artıq qızıb | Elektrik bağlantısını və qoruyucunu yoxlayın Adjust float switch position or manually activate Disconnect power, let cool down, check for blockages |
| Aşağı axın sürəti | Partial blockage in intake/outlet Hose kinked or too long/narrow Suyun qeyri-kafi səviyyəsi | Clean intake and outlet Check hose for kinks, use appropriate diameter Ensure pump is adequately submerged |
| Nasos fasiləsiz işləyir | Float switch stuck in 'on' position Water level not dropping below deactivation point | Check float switch for free movement Ensure proper float switch adjustment for deactivation |
8. Spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Model | GE-SP 3046 RB |
| Məqalə nömrəsi | 4170438 |
| Güc | 350 Vt |
| Cildtage | 230 V |
| Maks. Axın | 4,600 L/h (4.6 Litres per second) |
| Maks. Çatdırılma hündürlüyü | 11 m |
| Max. Impurity Size | 2.5 mm |
| Kabel uzunluğu | 10 m |
| Material | Impact-resistant PVC Plastic |
| Çəki | 3.8 kq |
| Ölçülər (U x G x Y) | 17 x 23 x 51 sm |
9. Zəmanət və Dəstək
Einhell products are manufactured with high-quality materials and undergo strict quality controls. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Keep your purchase receipt as proof of purchase.