Zerone L336 Universal Learning Remote Control User Manual

Giriş

The Zerone L336 is a universal learning remote control designed to consolidate the functions of up to three infrared (IR) remote controls for devices such as TVs, SAT boxes, and DVD players. It features an advanced copy technology that allows it to accurately replicate IR codes from your original remotes, providing a unified control solution for your home entertainment system. This manual provides instructions for setting up, operating, and maintaining your L336 remote control.

Məhsul Bitdiview

The L336 remote control is equipped with 126 programmable keys across three device modes (TV, SAT, DVD), allowing for extensive customization. Its design focuses on ease of use and reliable performance after initial setup.

Şəkil 1: Ön view of the Zerone L336 Universal Learning Remote Control, displaying its full array of buttons including device selection, navigation, number pad, and function keys.

Əsas Xüsusiyyətlər:

• Infrared Code Copying: Adopts fast code locating techniques to accurately copy codes and functions from original IR remote controls.
• Çox Cihazlı Nəzarət: Provides 3 device modes (TV, SAT, DVD) and 126 keys available for learning.
• One-Key Learning Function: Simplifies the process of copying functions, allowing for efficient batch settings.
• Daimi Yaddaş: Retains learned settings even after battery replacement.

Spesifikasiyalar

Quraşdırma

1. Batareyanın quraşdırılması

1. Pultun arxasındakı batareya bölməsinin qapağını tapın.
2. Bölməni açmaq üçün qapağı aşağı sürüşdürün.
3. Bölmənin içərisində göstərildiyi kimi düzgün qütblüyü (+ və -) təmin edərək iki (2) AAA batareyanı yerləşdirin.
4. Batareya bölməsinin qapağını təhlükəsiz şəkildə kliklənənə qədər yerinə sürüşdürün.

Şəkil 2: Geri view of the Zerone L336 remote control with the battery compartment open, showing where to insert two AAA batteries.

Qeyd: Batteries are not included with the remote control. Use new, high-quality AAA batteries for optimal performance.

2. Initial Setup for Learning Function

The L336 remote control requires an original, working infrared remote control for each device you wish to control. The L336 learns functions directly from these original remotes.

Operating the Learning Function

Follow these steps to program the L336 remote control to learn functions from your original remote controls. Ensure both remotes have fresh batteries and are within close proximity (approximately 1-3 cm) during the learning process.

Şəkil 3: The Zerone L336 remote control shown from an angle, highlighting its ability to copy codes and its 126 learning keys.

1. Öyrənmə rejiminə daxil olun: İstədiyiniz cihaz düyməsini basıb saxlayın (məsələn, TV, SAT, və ya DVD) for approximately 3 seconds until the red indicator light (usually near the POWER button) lights up and stays solid. This indicates the remote is ready to learn.
2. Position Remotes: Place the L336 remote and your original remote control head-to-head, with their IR emitters facing each other, about 1 to 3 centimeters apart.
3. Select Key to Learn: On the L336 remote, press the button you wish to program (e.g., GÜC, VOL+, CH+). The red indicator light on the L336 will start blinking slowly, waiting for the signal.
4. Siqnal ötürmə: On your original remote control, press and hold the corresponding button (e.g., POWER, VOL+, CH+). The red indicator light on the L336 will blink rapidly three times and then stay solid, indicating successful learning.
5. Digər düymələr üçün təkrarlayın: Repeat steps 3 and 4 for all other buttons you wish to program for the selected device.
6. Öyrənmə Rejimindən Çıxın: Once all desired keys are programmed for the current device, press the same device button (e.g., TV, SAT, və ya DVD) again to exit learning mode. The red indicator light will turn off.

Repeat the entire process for other devices (SAT, DVD) if you wish to program them.

Using Learned Functions

After successfully programming the L336 remote, simply press the corresponding device button (TV, SAT, or DVD) to select the device you want to control. Then, use the programmed buttons as you would with your original remote control.

Şəkil 4: A hand holding the Zerone L336 remote control, demonstrating its use with a smart TV interface displayed on a screen.

Baxım

Təmizləmə

Pultu təmizləmək üçün yumşaq, quru parça istifadə edin. İnadkar kirlər üçün bir az dampParçanı su və ya yumşaq, aşındırıcı olmayan təmizləyici ilə yuyun. Sərt kimyəvi maddələrdən və ya aşındırıcı materiallardan istifadə etməkdən çəkinin, çünki bunlar pultun səthinə və ya daxili komponentlərinə zərər verə bilər.

Batareyanın dəyişdirilməsi

If the remote control's performance degrades or the indicator light does not respond as expected, it may be time to replace the batteries. Refer to the "Battery Installation" section under Setup for instructions. The L336 features permanent memory, so learned functions will not be lost when batteries are replaced.

Problemlərin aradan qaldırılması

• Pult cavab vermir:
  • Ensure batteries are correctly installed and have sufficient charge. Replace with new AAA batteries if necessary.
  • Verify that the correct device mode (TV, SAT, DVD) is selected by pressing the corresponding button.
  • Pult və cihaz arasında heç bir maneə olmadığından əmin olun.
• Learning function not working:
  • Confirm that the L336 remote is in learning mode (red indicator light solid).
  • Ensure the original remote control has working batteries and is transmitting a strong IR signal.
  • Adjust the distance between the L336 and the original remote (1-3 cm is ideal).
  • Ensure the IR emitters of both remotes are directly facing each other.
  • Try the learning process again, ensuring you press and hold the buttons firmly and for the correct duration.
• Qısa əməliyyat diapazonu:
  • Batareyaları yeniləri ilə əvəz edin.
  • Ensure the remote is pointed directly at the device's IR receiver.
  • Minimize sources of IR interference (e.g., direct sunlight, certain types of lighting).
• Only some buttons learn, or specific buttons do not work:
  • Some original remotes may use different IR frequencies or protocols that are not compatible with the L336's learning capabilities.
  • Re-attempt the learning process for the problematic buttons, ensuring precise alignment and timing.

Zəmanət və Dəstək

For warranty information and customer support, please refer to the documentation provided at the point of purchase or contact the retailer directly. You may also visit the official Zerone store for additional product information and support resources.

Zerone Store: https://www.amazon.com/stores/Zerone/page/A619C4D9-FCE5-459B-B745-8DD2D44F2669