Kebidumei USB 3.0 Sata HDD Adapter (5Gbps, 22Pin) User Manual

1. Giriş

Aldığınız üçün təşəkkür edirikasing the Kebidumei USB 3.0 SATA HDD Adapter. This adapter provides a convenient solution for connecting 2.5-inch and 3.5-inch SATA hard drives or SSDs to your computer via a USB 3.0 port, offering fast data transfer speeds of up to 5Gbps. It is designed for easy plug-and-play use, making data recovery, drive cloning, or external storage setup straightforward.

2. Təhlükəsizlik Məlumatı

Do not expose the adapter to moisture or extreme temperatures.
Adapteri yerə salmaqdan və ya güclü zərbələrə məruz qoymaqdan çəkinin.
Ensure proper ventilation when in use, especially with 3.5-inch HDDs that may require external power.
Disconnect the adapter from the computer and power source (if applicable) before connecting or disconnecting a hard drive.
Use only the specified power adapter if one is required for 3.5-inch drives (power adapter not included with this specific model, typically for 2.5-inch drives).

3. Paketin məzmunu

1 x Kebidumei USB 3.0 to SATA HDD Adapter (5Gbps, 22Pin)

Note: Hard drives/SSDs and external power adapters (for 3.5" HDDs) are sold separately.

4. Quraşdırma

4.1 Adapterin qoşulması

Follow these steps to connect your SATA hard drive or SSD to your computer using the Kebidumei USB 3.0 SATA HDD Adapter:

Ensure your computer is powered on and running.
Connect the 22-pin SATA connector of the adapter firmly to the SATA data and power ports on your 2.5-inch or 3.5-inch SATA hard drive/SSD.
If connecting a 3.5-inch HDD, connect an external 12V power adapter (not included) to the power input port on the SATA drive, if required by the drive. 2.5-inch drives typically draw sufficient power from the USB port.
Plug the USB 3.0 Type-A connector(s) of the adapter into an available USB 3.0 port on your computer. For optimal performance, use a USB 3.0 port (usually blue inside). If your adapter has two USB connectors, ensure both are plugged in for stable power delivery, especially for 2.5-inch drives.
Your operating system should automatically detect and install the necessary drivers. The drive will appear as a new storage device.

Kebidumei USB 3.0 SATA HDD Adapter with two USB-A connectors and one SATA 22-pin connector — Image: The Kebidumei USB 3.0 SATA HDD Adapter. It features a black plastic housing with a 22-pin SATA connector on one end, designed to connect directly to a SATA hard drive or SSD. Extending from the housing are two black cables, each terminating in a USB Type-A connector. One USB connector is typically for data and power, while the second (often marked for power only) provides additional power for drives that require it, such as some 2.5-inch HDDs or for more stable operation.

5. Əməliyyat Təlimatları

5.1 Adapterdən istifadə

Once connected, the hard drive or SSD will be accessible through your computer's file explorer (Windows) or Finder (macOS). You can perform various operations:

Məlumat ötürülməsi: Çək və burax files to and from the connected drive. Enjoy fast transfer speeds thanks to USB 3.0.
Yedəkləmə: Use the drive for backing up important data.
Klonlama: Utilize disk cloning software to duplicate an existing drive.
Məlumatların Bərpası: Access data from old or non-booting drives.

5.2 Sürücünün Təhlükəsiz Çıxarılması

Always safely eject the drive before physically disconnecting the adapter from your computer to prevent data corruption:

Windows: Click the "Safely Remove Hardware and Eject Media" icon in the system tray, then select the drive to eject.
macOS: Drag the drive icon from the desktop to the Trash, or right-click the drive icon and select "Eject".

6. Baxım

The Kebidumei USB 3.0 SATA HDD Adapter requires minimal maintenance:

Təmizləmə: Adapteri yumşaq, quru parça ilə silin. Maye təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
Yaddaş: Adapteri istifadə edilmədikdə, onu sərin, quru yerdə, birbaşa günəş işığından və həddindən artıq temperaturdan uzaq saxlayın.
Kabel Baxımı: Daxili zədələnmənin qarşısını almaq üçün kabelləri həddindən artıq əyməkdən və ya burulmaqdan çəkinin.

7. Giderme

Problem	Mümkün Həll
Drive not detected.	Bütün əlaqələrin təhlükəsiz olduğundan əmin olun. Kompüterinizdə fərqli USB portunu sınayın. If using a 3.5-inch HDD, ensure the external power adapter is connected and working. Check Disk Management (Windows) or Disk Utility (macOS) to see if the drive is recognized but unformatted or unallocated. Try connecting the adapter to another computer to rule out system-specific issues.
Yavaş məlumat ötürmə sürəti.	Ensure the adapter is connected to a USB 3.0 port (blue port). Verify that your hard drive/SSD supports USB 3.0 speeds. Sistem resurslarından istifadə edə biləcək digər tətbiqləri bağlayın.
Sürücü təsadüfi olaraq ayrılır.	Ensure sufficient power is supplied, especially for 2.5-inch HDDs that might need both USB connectors plugged in, or 3.5-inch HDDs requiring an external power adapter. Boş bağlantıları yoxlayın. Avoid using USB hubs if possible, or use a powered USB hub.

8. Spesifikasiyalar

Xüsusiyyət	Detal
Məhsulun adı	Kebidumei USB 3.0 Sata HDD Adapter
Model nömrəsi	KBT000663
İnterfeys	USB 3.0 (backward compatible with USB 2.0) to SATA 22Pin
Məlumat ötürmə dərəcəsi	Up to 5 Gbps (USB 3.0 SuperSpeed)
Uyğun Disklər	2.5 düymlük / 3.5 düymlük SATA HDD/SSD
Əməliyyat Sistemi Uyğunluğu	Windows, macOS, Linux (driver-free)
Rəng	Qara
Bağlayıcı növü	USB Tip A
Kabel növü	USB

9. Zəmanət və Dəstək

This Kebidumei product comes with a standard manufacturer's warranty. Please refer to the retailer's policy or the product packaging for specific warranty terms and duration.

For technical support, troubleshooting assistance, or warranty claims, please contact your point of purchase or visit the official Kebidumei website for contact information. When contacting support, please have your product model number (KBT000663) and purchase details ready.

Kebidumei is committed to providing high-quality products and customer satisfaction.

kebidumei KBT000663

Kebidumei USB 3.0 Sata HDD Adapter User Manual