1. Giriş
The Inkbird ITC308S is a reliable and easy-to-use temperature controller designed for precise temperature management in various applications, particularly aquariums. It features dual relay outputs for both heating and cooling devices, ensuring stable temperature control. The unit includes a fully submersible probe for accurate temperature readings in liquid environments.
2. Təhlükəsizlik Məlumatı
- Ensure the power supply matches the controller's requirements (110V for this model).
- Do not immerse the main controller unit in water. Only the probe is submersible.
- Hər hansı bir təmir və ya quraşdırma işləri aparmazdan əvvəl həmişə elektrik enerjisini ayırın.
- Cihazı uşaqlardan və ev heyvanlarından uzaq saxlayın.
- Hər hansı bir hissəsi zədələnmişsə, cihazı istifadə etməyin.
3. Paketin məzmunu
- ITC308S Temperature Controller Unit
- Submersible Temperature Probe
- Suction Cup for Probe Mounting
- İstifadəçi təlimatı
Şəkil 3.1: The Inkbird ITC308S Temperature Controller and its included accessories, packaged in a brown box.
4. Məhsul bitdiview
The ITC308S features a main control unit with a dual LED display, showing both the present value (PV) and set value (SV) temperatures. It has dedicated outlets for heating and cooling devices, and a detachable submersible probe for accurate temperature sensing.
Şəkil 4.1: Bitdiview of the Inkbird ITC308S controller, showing the display, control buttons, power cord, and probe connection.
Şəkil 4.2: The dual power outlets, clearly marked for 'HEATING' and 'COOLING' devices.
Şəkil 4.3: The submersible temperature probe, designed for accurate readings in water, shown with its suction cup.
5. Spesifikasiyalar
| Xüsusiyyət | Detal |
|---|---|
| Model | ITC-308S |
| Cildtage | 120 Volt (AC) |
| Maksimum Çıxış Yükü | 1200 Vt (110 V) |
| Temperatur nəzarət rejimi | On/Off Control (Heating and Cooling) |
| Prob növü | Fully Submersible Aquarium Probe |
| Ekran növü | LED Dual Display |
| Material | plastik |
| Rəng | Green, Gray and White |
6. Quraşdırma Təlimatları
- Probu birləşdirin: Plug the submersible temperature probe into the designated port on the main controller unit. Use the provided suction cup to secure the probe inside your aquarium or water bath, ensuring it is fully submerged and away from direct heat sources or strong currents.
- Connect Heating/Cooling Devices: Plug your heating device (e.g., aquarium heater) into the 'HEATING' outlet and your cooling device (e.g., cooling fan) into the 'COOLING' outlet on the power strip. Ensure devices are rated within the controller's maximum output load (1200W).
- Güc Aktivdir: Plug the main power cord of the ITC308S controller into a standard 110V AC power outlet. The LED display will illuminate, showing the current temperature (PV) and the set temperature (SV).
Şəkil 6.1: The submersible probe correctly placed within an aquarium, ensuring accurate temperature measurement.
7. Əməliyyat Təlimatları
- View Current Temperature (PV): The upper LED display shows the current measured temperature (Process Value).
- View Set Temperature (SV): The lower LED display shows the desired set temperature (Set Value).
- Temperaturu təyin edin:
- düyməsini basın SET düyməsini bir dəfə basın. SV ekranı yanıb-sönəcək.
- istifadə edin Yuxarı (▲) or Aşağı (▼) istədiyiniz temperaturu tənzimləmək üçün düymələr.
- basın SET again to confirm and save the setting, or wait a few seconds for it to save automatically.
- Heating/Cooling Indication: The 'HEATING' or 'COOLING' indicator lights will illuminate when the respective outlet is active.
- Temperaturun kalibrlənməsi: Refer to the detailed instructions in the included paper manual for advanced settings like temperature calibration, differential settings, and alarm parameters. These settings allow fine-tuning of the controller's response.
- Siqnallar: The controller features over-temperature and sensor fault alarms. If an alarm triggers, the display will show an error code (e.g., 'HHH' for over-temperature, 'LLL' for under-temperature, 'ERR' for sensor fault) and an audible alert may sound. Address the issue promptly.
8. Baxım
- Probun təmizlənməsi: Regularly inspect and clean the submersible probe to prevent algae or mineral buildup, which can affect accuracy. Use a soft cloth and mild cleaning solution if necessary.
- Controller Unit: Wipe the main controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse it in water.
- Kabel yoxlaması: Periodically check all cables for any signs of wear, cuts, or damage. Replace if necessary.
9. Giderme
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Ekran boşdur | Enerji təchizatı yoxdur | Elektrik bağlantısı və çıxışı yoxlayın. |
| Temperaturun oxunuşu səhvdir | Probe dirty or improperly placed; calibration needed | Clean probe, ensure proper submersion, perform temperature calibration. |
| Heating/Cooling device not turning on | Device not plugged in correctly; controller settings incorrect; device malfunction | Verify device connection to correct outlet, check set temperature and differential, test device independently. |
| Alarm sounds frequently | Temperature outside set range; alarm limits too narrow | Adjust set temperature or alarm high/low limits. Ensure heating/cooling devices are functioning. |
| 'ERR' displayed | Sensor nasazlığı | Check probe connection. If error persists, the probe may need replacement. |
10. Zəmanət və Dəstək
Inkbird products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Inkbird webSayt. Zəmanət iddiaları üçün alış qəbzini saxlayın.