1. Məhsul bitdiview
The Total TWP47506 750W Automatic Jet Water Pump is designed for efficient clean water collection and distribution. It is suitable for drawing water from wells, boreholes, open tanks, and other water supply sources. Primary applications include watering vegetable gardens, personal plots, and ensuring water circulation in fountains and various water features. Its design prioritizes ease of maintenance and portability, featuring an external tank location. The pump incorporates a brushless induction motor for long-lasting, maintenance-free operation. The robust cast iron pump casing can be rotated 90 degrees for flexible installation. This pump is capable of integration into automated water supply systems.
Şəkil 1: Total TWP47506 750W Automatic Jet Water Pump. This image shows the complete pump unit with its motor and casing.
2. Təhlükəsizlik Təlimatları
Read all safety warnings and instructions carefully before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
Ümumi Təhlükəsizlik
- Həmişə təhlükəsizlik eynəkləri və əlcəklər kimi müvafiq fərdi qoruyucu vasitələrdən (PPE) istifadə edin.
- Ensure the pump is placed on a stable, level surface to prevent tipping.
- Uşaqları və icazəsiz şəxsləri əməliyyat zonasından uzaq tutun.
- Do not operate the pump in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Never use the pump to transfer flammable, corrosive, or explosive liquids.
- Disconnect the power supply before performing any maintenance, cleaning, or when the pump is not in use.
Elektrik Təhlükəsizliyi
- Enerji təchizatı voltage matches the specifications on the pump's rating label (220-240V, 50Hz).
- Use a properly grounded outlet. Do not modify the plug.
- Do not expose the pump or electrical connections to rain or wet conditions.
- Avoid using extension cords unless absolutely necessary. If an extension cord is used, ensure it is rated for outdoor use and has the correct gauge for the pump's power requirements.
- Never carry the pump by its power cord.
- Regularly inspect the power cord for damage. If damaged, have it replaced by a qualified electrician.
3. Paketin məzmunu
Verify that all items listed below are present and undamaged upon unpacking:
- 1 x Total TWP47506 750W Automatic Jet Water Pump
- 1 x təzyiq açarı
- 1 x Stainless Steel Hose
- 1 x Təzyiq Ölçer
- 1 x Three-way Brass Fitting
- İstifadəçi Təlimatı (bu sənəd)
4. Texniki spesifikasiyalar
| Spesifikasiya | Dəyər |
|---|---|
| Model nömrəsi | TWP47506 |
| Növ | Self-priming Automatic Jet Pump |
| Nominal güc | 750 Vt (1.0 HP) |
| Cildtage | 220-240V |
| Tezlik | 50Hz |
| Maks Baş | 45 metr |
| Maksimum axın | 60 litr/dəq |
| Maksimum emiş | 9 metr |
| Boru diametri | 1 x 1 düym |
| Motor növü | Copper Wire Induction Motor (Brushless) |
| Çark materialı | Paslanmayan Polad |
| Nasos Casing Material | Çuqun |
| Kabel uzunluğu | 0.3 metr |
| Tank Capacity (Cylindrical) | 24 litr |
| Məhsulun Ölçüləri (U x G x Y) | 30 x 19 x 22 sm |
| Maddə Çəkisi | 1.5 kq |
| Rəng | Gümüş |
5. Quraşdırma və Quraşdırma
5.1 Yerləşdirmə
- Position the pump on a firm, level, and dry surface.
- Ensure adequate ventilation around the pump to prevent overheating.
- Protect the pump from direct exposure to weather elements (rain, direct sunlight, frost).
- Keep the pump as close as possible to the water source to minimize suction lift and maximize efficiency.
5.2 Boruların birləşdirilməsi
The pump is equipped with standard inch fittings for both suction and discharge pipes.
- Emiş borusu: Connect a rigid, airtight suction pipe (1 inch diameter) to the pump's inlet. Ensure all connections are sealed to prevent air leaks, which can affect priming and pump performance. A foot valve with a strainer should be installed at the end of the suction pipe submerged in the water source to prevent debris from entering the pump and to maintain prime.
- Boşaltma borusu: Connect a discharge pipe (1 inch diameter) to the pump's outlet. Use the provided three-way brass fitting, pressure switch, and pressure gauge as part of your water supply system. Ensure all connections are secure.
5.3 Pompanın doldurulması
This is a self-priming pump, but initial priming is crucial for proper operation. Before first use or after the pump has run dry:
- Sorma borusunun su mənbəyinə tamamilə batırıldığından əmin olun.
- Locate the priming plug on the top of the pump casing.
- Unscrew the priming plug and slowly fill the pump casing with clean water until it overflows.
- Replace and securely tighten the priming plug.
- Open any valves on the discharge side to allow air to escape during startup.
5.4 Elektrik bağlantısı
- Connect the pump's power cord to a grounded electrical outlet (220-240V, 50Hz).
- Ensure the electrical circuit is protected by a Residual Current Device (RCD) for added safety.
6. Əməliyyat
6.1 Pompanın işə salınması
- Ensure the pump has been properly primed (Section 5.3).
- Verify all pipe connections are secure and leak-free.
- Plug the pump into the power outlet. The pump will start automatically if connected to an automated system with a pressure switch.
- Observe the pressure gauge. The pressure should rise as the pump builds pressure.
- If the pump does not draw water within a few minutes, switch it off, re-prime, and check for air leaks in the suction line.
6.2 Avtomatik İşləmə
When integrated into a water supply system with the included pressure switch, the pump will automatically start when water pressure drops (e.g., when a tap is opened) and stop when the desired pressure is reached (e.g., when the tap is closed). The 24-liter cylindrical tank helps maintain consistent pressure and reduces pump cycling.
6.3 Pompanın dayandırılması
For temporary shutdown, close all water outlets. The pump will stop automatically if operating in an automated system. For complete shutdown or extended periods of non-use, unplug the pump from the power supply.
7. Baxım
Regular maintenance ensures optimal performance and extends the lifespan of your pump. Always disconnect the power supply before performing any maintenance.
7.1 Müntəzəm yoxlamalar
- Elektrik kabelini və fişini hər hansı zədə əlamətləri üçün yoxlayın.
- Check all pipe connections for leaks. Tighten if necessary.
- Ensure the foot valve strainer is clear of debris. Clean if clogged.
- Listen for unusual noises during operation, which may indicate a problem.
7.2 Təmizləmə
Pompanın xarici hissəsini reklamla silinamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the motor's ventilation openings are free from dust and debris.
7.3 Qışlama (soyuq iqlim üçün)
If the pump is exposed to freezing temperatures, it must be drained to prevent damage:
- Enerji təchizatını ayırın.
- Drain all water from the pump casing by unscrewing the drain plug (if present) or by tilting the pump.
- Disconnect the suction and discharge pipes and drain them completely.
- Pompanı quru, şaxtadan qorunan yerdə saxlayın.
8. Giderme
Müştəri dəstəyi ilə əlaqə saxlamazdan əvvəl ümumi problemlər və həll yolları üçün aşağıdakı cədvələ baxın.
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Pompa işə düşmür | Enerji təchizatı yoxdur Arızalı elektrik şnurunu/fişli Motor overload protection tripped |
Elektrik bağlantısı və çıxışı yoxlayın Yoxlayın və zədələnmişsə dəyişdirin Allow motor to cool, then restart. Check for blockages. |
| Nasos işləyir, amma su verilmir | Nasos astarlanmamışdır Emiş xəttində hava sızması Emiş qaldırıcısı çox yüksəkdir Foot valve clogged or stuck Su mənbəyi boşdur |
Re-prime the pump (Section 5.3) Check all suction connections for leaks and tighten Relocate pump closer to water source Clean or replace foot valve Ensure adequate water in source |
| Aşağı axın və ya təzyiq | Partial blockage in pipes/impeller Emiş xəttində hava sızması Aşınmış pervane Incorrect pressure switch setting |
Inspect and clear blockages Check and seal suction connections İxtisaslı xidmət personalı ilə əlaqə saxlayın Adjust pressure switch according to manufacturer guidelines (if adjustable) |
| Pump cycles on and off frequently | Leak in discharge system Pressure tank pre-charge incorrect Arızalı təzyiq açarı |
Check for leaks in pipes, fittings, or fixtures Check and adjust pressure tank air pre-charge Inspect and replace pressure switch if necessary |
9. Zəmanət və Dəstək
This Total TWP47506 750W Automatic Jet Water Pump comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, spare parts, or warranty claims, please contact Total customer support through your retailer or visit the official Total website for contact information in your region. When contacting support, please have your model number (TWP47506) and purchase date available.