CHEREEKI 8808

CHEREEKI Digital LED Alarm Clock - Model 8808 Instruction Manual

Your guide to setting up and operating your new alarm clock.

1. Giriş

Thank you for choosing the CHEREEKI Digital LED Alarm Clock, Model 8808. This device combines a clear LED time display with temperature monitoring, dual alarms, snooze functionality, and a selection of melodies. This manual provides detailed instructions to help you maximize your product experience.

CHEREEKI Digital LED Alarm Clock showing time 12:00 and temperature 26 degrees Celsius
Şəkil 1: Ön view of the CHEREEKI Digital LED Alarm Clock displaying time and temperature.

2. Məhsul bitdiview və Komponentlər

Familiarize yourself with the clock's features and controls.

Diagram showing the features of the alarm clock including dual alarms, temperature, 12/24 hour, sound activated, volume adjustable, snooze, brightness adjustable, and 10 ringtones.
Şəkil 2: bitdiview of the alarm clock's main functions.
Back panel of the CHEREEKI Digital LED Alarm Clock showing buttons for Time Set, Up, Down, Alarm Set, Volume, Alarm 1 On/Off, Alarm 2 On/Off, Reset, and Charging Port.
Şəkil 3: Arxa view of the alarm clock, highlighting control buttons and ports.

3. Quraşdırma

3.1 Enerji təchizatı

The alarm clock offers two power modes:

  1. USB Powered Mode: Connect the included USB cable to a 5V/1A or 5V/2A adapter (not included) or a USB port. In this mode, the LED display remains continuously on.
  2. Batareya ilə işləyən rejim: The clock has a built-in rechargeable battery. When fully charged and disconnected from USB, the LED display will automatically turn off after 6 seconds to conserve power. To activate the display in battery mode, use the voice control function or press any button.

3.2 Initial Setup / Reset

If the display shows scrambled code or errors, use a thin pin to press the RESET button located on the back of the unit. This will restore the clock to its normal operating state.

4. Əməliyyat Təlimatları

4.1 Vaxtın təyin edilməsi

Cari vaxtı təyin etmək üçün:

  1. Press and hold the 'TIME SET' button on the back of the clock. The hour digits will begin to flash.
  2. Use the 'UP' and 'DOWN' buttons to adjust the hour.
  3. Press 'TIME SET' again to move to the minute setting. Use 'UP' and 'DOWN' to adjust the minutes.
  4. Press 'TIME SET' one more time to confirm and exit time setting mode.
Video 1: Demonstrates how to set the time on the alarm clock.

4.2 Siqnalların qurulması

Saat iki müstəqil həyəcan siqnalına malikdir (Siqnal 1 və Siqnal 2).

  1. To set Alarm 1, press and hold the 'ALARM SET' button. The Alarm 1 hour digits will flash.
  2. Use the 'UP' and 'DOWN' buttons to adjust the alarm hour.
  3. Press 'ALARM SET' again to move to the Alarm 1 minute setting. Adjust minutes using 'UP' and 'DOWN'.
  4. Press 'ALARM SET' to confirm Alarm 1. Repeat steps for Alarm 2 if desired.
  5. To activate or deactivate an alarm, use the dedicated 'ALARM1 ON/OFF' and 'ALARM2 ON/OFF' switches on the back of the clock.
Video 2: Illustrates the process of setting both Alarm 1 and Alarm 2.
Image showing two alarm times set: 6:30 AM for Alarm 1 and 8:00 AM for Alarm 2, with a person waking up.
Şəkil 4: Məsələnample of dual alarm settings for different wake-up times.

4.3 Adjusting Alarm Volume and Melodies

The clock offers 3 volume levels and 10 different alarm melodies.

  1. While in alarm setting mode (after setting hours/minutes), press the 'VOLUME' button to cycle through the 3 volume levels (L01, L02, L03).
  2. To change the melody, press the 'DOWN' button while the alarm is ringing or during alarm setup to cycle through the 10 available sounds.
Video 3: Guide on adjusting the alarm volume levels.
Image showing 10 natural sounds available for alarms and 4 selectable volume levels.
Figure 5: Visual representation of the 10 available alarm melodies and volume settings.

4.4 Snooze Function and Stopping Alarms

When an alarm sounds:

  1. To activate the 5-minute snooze, press the 'SNOOZE/LIGHT' button on the top of the clock. The alarm will pause and sound again after 5 minutes.
  2. To stop the alarm completely, press any button on the clock istisna olmaqla the 'SNOOZE/LIGHT' button.
Video 4: Instructions on how to use the snooze function and stop an active alarm.

4.5 Parlaqlığın tənzimlənməsi

The clock offers both manual and automatic brightness adjustment.

Parlaqlığın Manuel Tənzimlənməsi:

Press the 'SNOOZE/LIGHT' button on the top of the clock to cycle through 4 levels of brightness (25%, 50%, 75%, 100%).

Video 5: Demonstrates how to manually adjust the display brightness.
Image showing four different brightness levels of the alarm clock display: 25%, 50%, 75%, and 100%.
Figure 6: Comparison of the four adjustable brightness levels.

Avtomatik Parlaqlıq Tənzimlənməsi:

When powered via USB, the clock automatically adjusts brightness based on the time of day:

  • 7:00 AM - 7:00 PM: High brightness.
  • 7:00 PM - 12:00 AM: Medium brightness.
  • 12:00 AM - 7:00 AM: Low brightness.
Video 6: Explanation of the automatic brightness adjustment feature.

4.6 Voice Activated Display (Battery Mode)

In battery mode, the display will turn off after 6 seconds. To reactivate it, make a sound louder than 90 dB (e.g., a clap, tap on the table, or voice). Alternatively, press any button to turn the display on.

Image illustrating the sound activated function where the display turns off after 6 seconds in battery mode, and can be awakened by sounds or by connecting to power for continuous display.
Figure 7: How the sound-activated display works in battery mode versus continuous display when plugged in.

4.7 Temperatur göstəricisi

The clock displays the ambient temperature. To switch between Celsius (°C) and Fahrenheit (°F), press the 'DOWN' button once.

4.8 12/24 Saat Format

To switch between 12-hour and 24-hour time formats, press the 'UP' button once.

4.9 Yaddaş funksiyası

The clock retains time and alarm settings even when the battery is depleted or the unit is turned off, thanks to its internal memory function. No need to reset after a power interruption.

Image demonstrating the memory function of the alarm clock, showing that settings are retained even after power loss.
Figure 8: The clock's memory function ensures settings are saved.

5. Baxım

  • Saatı yumşaq, quru parça ilə təmizləyin. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
  • Keep the clock away from heat sources, high humidity, and direct sunlight.
  • If not in use for an extended period, turn off the power switch to preserve battery life.

6. Giderme

ProblemMümkün SəbəbHəll
Display is blank in battery mode.Power-saving feature activated.Make a sound (e.g., clap) or press any button to activate the display. Connect to USB for continuous display.
Display shows scrambled code or error.Daxili səhv.Press the 'RESET' button on the back of the clock using a thin pin.
Siqnal səslənmir.Siqnal deaktiv edilib və ya səs səviyyəsi çox aşağıdır.Check the 'ALARM ON/OFF' switch for the respective alarm. Adjust alarm volume as described in section 4.3.
Clock not charging or holding charge.Faulty cable/adapter or battery issue.Ensure the USB cable and adapter are working correctly. If issues persist, contact customer support.

7. Spesifikasiyalar

  • Brend: ÇEREKİ
  • Model nömrəsi: 8808
  • Rəng: Gümüş
  • Material: plastik
  • Ölçülər (U x G x Y): 14.5 x 3.81 x 5.08 sm (5.71 x 1.5 x 2 düym)
  • Maddə çəkisi: 158 qram (0.35 funt)
  • Güc mənbəyi: Battery Powered (1 Lithium-polymer battery included) / USB Powered
  • Ekran növü: Rəqəmsal LED
  • Xüsusi Xüsusiyyətlər: Temperature Display, Dual Alarms, Charging Port, Snooze, Voice Activation, Adjustable Brightness, 10 Melodies.

8. Zəmanət və Dəstək

For any questions regarding your CHEREEKI Digital LED Alarm Clock, please do not hesitate to contact our customer service. We are committed to providing attentive after-sales service.

© 2023 CHEREEKI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.