YOUSHARES HyperX QuadCast Microphone Boom Arm Instruction Manual

1. Giriş

The YOUSHARES HyperX QuadCast Microphone Boom Arm is designed to provide flexible and stable positioning for your microphone, enhancing audio quality by minimizing desk vibrations and allowing precise placement. This manual provides detailed instructions for setting up, operating, and maintaining your boom arm.

2. Nə daxildir

Paketə aşağıdakı komponentlər daxildir:

• Suspension Boom Arm
• Masa Montajı Clamp
• Microphone Adapter (3/8" to 5/8")
• Pop Filtri
• Cable Sleeves (x2)

3. Quraşdırma Təlimatları

1. Attach Table Mounting Clamp: C-cl-ni təmin edinamp to the edge of your desk or tabletop. Ensure the sponge padding is between the clamp and your desk to prevent scratches. Tighten the screw firmly until the clamp is stable. The clamp supports surfaces up to 1.8 inches thick.

   

   For a visual guide on clamp installation, refer to the video below:

2. Bum qolunu daxil edin: Slide the base of the suspension boom arm into the hole on the table mounting clamp.
3. Mikrofonu qoşun: Screw the microphone adapter (if needed) onto the boom arm's microphone connector. Then, attach your HyperX QuadCast microphone to the adapter. Ensure all connections are secure.

   

   For a quick guide on microphone installation, watch the video below:

4. Pop Filtri əlavə edin: Clamp the pop filter onto the boom arm and position it in front of your microphone. The flexible gooseneck allows for precise adjustment.
5. Kabel İdarəetmə: Use the provided cable sleeves to route your microphone cable along the boom arm. This helps maintain a tidy workspace and prevents cable interference.

   

   

4. Əməliyyat Təlimatları

The boom arm offers extensive adjustability to suit your needs:

• Bucaq tənzimlənməsi: The arm can be moved up and down 180 degrees, and rotated 360 degrees. Use the arm adjustment knobs to secure the desired angle.
• Mikrofon yeri: The microphone connector allows for 270-degree rotation, enabling you to fine-tune the microphone's direction.
• Sabitlik: Ensure all adjustment knobs are tightened once the desired position is achieved to prevent sagging or movement.

5. Baxım

• Regularly check all screws and clamps to ensure they are tight and secure.
• Wipe the boom arm with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
• Inspect cable sleeves for wear and tear and replace if necessary to maintain cable organization.

6. Giderme

• Boom Arm Sagging: Ensure the table mounting clamp is securely tightened to the desk. Verify that the microphone's weight does not exceed the maximum load capacity of 1.4 kg (3.1 lb).
• Microphone Instability: Check that the microphone adapter and the microphone itself are firmly screwed onto the boom arm. Tighten any loose adjustment knobs on the arm.
• Cables Tangling: Re-route cables through the provided cable sleeves and ensure they are properly secured to prevent tangling during adjustments.

7. Spesifikasiyalar

8. Zəmanət və Dəstək

For warranty information or technical support, please contact YOUSHARES customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.