Risco RVCM52P2200A

Risco Vupoint POE IP Kamera İstifadəçi Təlimatı

Model: RVCM52P2200A

1. Giriş

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Risco Vupoint POE IP Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Məhsul Bitdiview

The Risco Vupoint POE IP Camera is a high-resolution surveillance camera designed for robust security applications. It features Power over Ethernet (PoE) for simplified installation, a 4 Megapixel sensor for clear imaging, and advanced night vision capabilities.

Risco Vupoint POE IP Camera

Figure 1: Risco Vupoint POE IP Camera. This image shows a white cylindrical camera with a black lens housing and a circular mounting base. The 'RISCO' logo is visible on the side of the camera body.

Paketin məzmunu

Bütün komponentlərin paketdə olduğunu yoxlayın:

2. Təhlükəsizlik Məlumatı

Məhsula zərər verməmək və ya özünüzə xəsarət yetirməmək üçün aşağıdakı təhlükəsizlik tədbirlərinə əməl edin:

3. Quraşdırma və Quraşdırma

Fiziki Quraşdırma

The Risco Vupoint POE IP Camera is designed for wall or ceiling mounting. Ensure the mounting surface is strong enough to support the camera's weight (approximately 1.06 kg / 2.34 lbs).

  1. Choose a suitable location that provides the desired field of view and is within range of your network cable.
  2. Use the provided mounting template (if applicable) to mark drill holes on the wall or ceiling.
  3. Deliklər qazın və zəruri hallarda divar ankerləri daxil edin.
  4. Verilən vintlərdən istifadə edərək kameranın montaj əsasını səthə bərkidin.
  5. Optimal əhatə dairəsi üçün kameranın bucağını tənzimləyin.

Şəbəkə Bağlantısı (PoE)

This camera supports Power over Ethernet (PoE), simplifying wiring by delivering both power and data over a single Ethernet cable.

  1. Ethernet kabelinin bir ucunu kameranın RJ45 portuna qoşun.
  2. Connect the other end of the Ethernet cable to a PoE-enabled switch or PoE injector.
  3. Ensure your network is configured to provide IP addresses via DHCP or assign a static IP address to the camera if required by your system.

İlkin Konfiqurasiya

The camera is designed for Plug and Play installation with Risco systems. For integration with Risco Cloud™, Agility™ v3.59+, LightSYS™ v2.52+, or ProSYS™ Plus systems, follow the specific integration steps provided by Risco for your security panel.

4. Kameranın işlədilməsi

Canlı View və Qeyd

Access the live video feed and manage recordings through your connected Risco security system's interface (e.g., Risco Cloud, NVR) or a compatible ONVIF client.

Bulud Bağlantısı

For remote access and cloud-based features, ensure your camera is properly linked to your Risco Cloud account via a compatible Risco NVR or security panel.

5. Baxım

Təmizləmə

To maintain optimal image quality, periodically clean the camera lens and housing.

Proqram təminatı güncəlləmələri

Periodically check for firmware updates through your Risco system or Risco's official websayt. Mikroproqram yeniləmələri performansı yaxşılaşdıra, yeni funksiyalar əlavə edə və təhlükəsizliyi artıra bilər.

6. Giderme

If you encounter issues with your Risco Vupoint POE IP Camera, refer to the following common problems and solutions:

ProblemMümkün SəbəbHəll
Video lenti yoxdurNo power (PoE), Network cable disconnected, Incorrect IP address, NVR/System not configured.Verify PoE switch/injector is active. Check Ethernet cable connection. Ensure camera has a valid IP address. Confirm camera is added and enabled in your NVR/Risco system.
Şəkil keyfiyyəti zəifdirDirty lens, Low light conditions, Incorrect resolution settings.Clean the lens. Ensure sufficient lighting or verify night vision is active. Check resolution settings in your system.
Gecə görmə işləmirIR LEDs obstructed, Sensor malfunction.Ensure nothing is blocking the IR LEDs. If the issue persists, contact Risco support.
Cannot connect to Risco CloudIncorrect NVR/license configuration, Network issues.Verify your Risco NVR or security panel is correctly configured for cloud access and that the camera is linked. Check network connectivity.

7. Spesifikasiyalar

XüsusiyyətDetal
Model nömrəsiRVCM52P2200A
BrendRisko
Bağlantı texnologiyasıSimli (PoE)
Effektiv Video Çözünürlük4 meqapiksel
Video Rezolyusiyasının Yazılması1080p (Full HD)
Lens2.8-12 mm
Gecə Görmə Aralığı50 metrə qədər
Xüsusi XüsusiyyətlərGecə Görünüşü
Girişdən qorunma (IP) reytinqiIP67
Bağlantı ProtokoluONVIF
UyğunluqRisco Cloud™, Agility™ v3.59+, LightSYS™ v2.52+, ProSYS™ Plus (all versions)
Montaj növüWall, Ceiling Mount
Rəng
Ölçülər (U x G x Y)24.4 x 9.1 x 10 sm (9.6 x 3.6 x 3.9 düym)
Çəki1.06 kq (2.34 funt)
Komponentlər Daxildir1 Kamera

8. Zəmanət və Dəstək

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Risco websayt. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.

Risco Rəsmi Websayt: www.riscogroup.com