1. Giriş
The Einhell AQUINNA 18/28 Power X-Change garden pump is a cordless, battery-powered device designed for pumping water in various garden applications. It is part of the Einhell Power X-Change system, allowing for flexible use of compatible batteries and chargers (sold separately). This manual provides essential information for the safe and efficient operation, setup, and maintenance of your garden pump.
Please read these instructions carefully before using the pump for the first time and keep them for future reference.
Figure 1: The Einhell AQUINNA 18/28 Power X-Change garden pump, showcasing onun kompakt dizaynı və inteqrasiya olunmuş tutacağı.
2. Təhlükəsizlik Təlimatları
Always observe the following safety precautions to prevent injury and damage to the pump.
Ümumi Təhlükəsizlik
- İstifadə etməzdən əvvəl bütün təlimatları oxuyun.
- Pompanın sabit, düz bir səthə yerləşdirildiyinə əmin olun.
- Do not operate the pump without water, as this can cause damage.
- Uşaqları və icazəsiz şəxsləri əməliyyat zonasından uzaq tutun.
- Wear appropriate personal protective equipment (PPE) if necessary.
Electrical Safety (Battery)
- Only use original Einhell Power X-Change batteries and chargers.
- Batareyaları suya, istiliyə və ya birbaşa günəş işığına məruz qoymayın.
- Store batteries in a dry place at room temperature.
- Remove the battery from the pump before any cleaning, maintenance, or storage.
Figure 2: Illustration indicating that the battery and charger are not included with the pump and must be purchased separately.
3. Komponentlər Bitdiview
Familiarize yourself with the main components of your Einhell AQUINNA 18/28 garden pump:
- Daşıma Dəstəyi: Asan nəqliyyat üçün.
- Batareya bölməsi: For inserting the Power X-Change battery.
- Yandır/Söndür/Rejim Dəyişdiricisi: To control pump operation and select power modes.
- Water Filling Screw: For filling the pump housing with water before operation.
- Suction Connection (Inlet): Threaded connection for the suction hose.
- Pressure Connection (Outlet): Threaded connection for the discharge hose.
- Water Drain Screw: For emptying the pump, especially for frost protection.
- Quraşdırma delikləri: For securing the pump in a fixed location.
Şəkil 3: Yaxından view of the robust metal threaded connections for suction and pressure hoses on the pump.
4. Quraşdırma
4.1 Batareyanın quraşdırılması
- Batareya bölməsinin qapağını açın.
- Insert a charged Einhell Power X-Change 18V battery into the compartment until it clicks into place.
- Batareya bölməsinin qapağını etibarlı şəkildə bağlayın.
Figure 4: Demonstrating the correct method for inserting a Power X-Change battery into the pump's battery compartment.
4.2 Şlanqları Birləşdirən
- Emiş hortumu: Connect a suitable suction hose (minimum 1 inch diameter recommended) to the suction connection (inlet) of the pump. Ensure all connections are airtight to prevent air intake, which can reduce pump performance. The maximum suction depth is 6 meters.
- Boşaltma hortumu: Connect a discharge hose to the pressure connection (outlet) of the pump. Secure all connections with appropriate clamps lazımdırsa.
4.3 Pompanın doldurulması
Before initial operation, the pump housing must be filled with water to ensure proper function and prevent damage.
- Remove the battery from the pump.
- Unscrew the water filling screw located on the top of the pump.
- Carefully fill the pump housing with clean water until it overflows.
- Replace and tighten the water filling screw securely.
Figure 5: Close-up of the red water filling screw, used to prime the pump with water before operation.
5. Əməliyyat Təlimatları
5.1 Pompanın işə salınması
- Ensure the pump is primed and all hoses are securely connected.
- Doldurulmuş batareyanı daxil edin.
- Move the On/Off/Mode switch to the desired operating mode.
Figure 6: Detail of the On/Off/Mode switch, allowing selection between ECO and BOOST modes.
5.2 Güc rejimi
- ECO rejimi: Provides maximum battery life with reduced pump pressure. Ideal for lighter watering tasks or when extended run time is required.
- BOOST rejimi: Delivers maximum pump power and pressure (up to 2.5 bar, 25m head). Suitable for demanding applications or when higher flow rates are needed.
5.3 Pompanın dayandırılması
To stop the pump, move the On/Off/Mode switch to the "OFF" position. For extended breaks or when finished, remove the battery.
Figure 7: The Einhell AQUINNA 18/28 pump in use, demonstrating its application for garden irrigation from a water source.
6. Baxım
Daimi texniki qulluq nasosunuzun uzunömürlülüyünü və optimal işləməsini təmin edir.
6.1 Təmizləmə
- After each use, clean the exterior of the pump with a damp parça.
- Periodically check the suction filter (if installed) for debris and clean as necessary.
- Ensure no foreign objects enter the pump's inlet or outlet.
6.2 Dondan qorunma
To prevent damage from freezing temperatures, completely drain the pump before storing it for winter or in cold conditions.
- Batareyanı çıxarın.
- Bütün şlanqları ayırın.
- Unscrew the water drain screw located at the bottom of the pump.
- Allow all water to drain completely. Tilt the pump if necessary.
- Replace and tighten the water drain screw.
Figure 8: Close-up of the water drain screw, essential for emptying the pump to prevent frost damage during cold weather.
6.3 Saxlama
Store the pump in a dry, frost-free location, out of reach of children. Ensure the battery is removed before storage.
7. Giderme
This section addresses common issues you might encounter with your garden pump.
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Pompa işə düşmür. | Battery not inserted or discharged. | Doldurulmuş batareyanı daxil edin. |
| On/Off switch in "OFF" position. | Move switch to "ECO" or "BOOST". | |
| Nasos işləyir, lakin su verilmir. | Pump not primed (air in housing). | Prime the pump by filling with water (Section 4.3). |
| Suction hose not airtight or too long. | Check all suction connections for leaks. Shorten hose if excessively long. | |
| Suction height too great (over 6m). | Reduce suction height or move pump closer to water source. | |
| Reduced pump performance. | Emiş filtri tıxanmışdır. | Emiş filtrini təmizləyin. |
| Batareyanın doldurulması azdır. | Batareyanı doldurun və ya dəyişdirin. | |
| Pompa gözlənilmədən dayanır. | Həddindən artıq yükdən qorunma aktivləşdirildi. | Allow pump to cool down. Check for blockages in hoses or pump. |
8. Texniki spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Model | AQUINNA 18/28 |
| Hissə nömrəsi | 4180440 |
| Cildtage | 18 V (Power X-Change) |
| Maks. Axın | Saatda 2800 Litr |
| Max. Pump Height (Head) | 25 meters (2.5 bar) |
| Max. Suction Depth | 6 metr |
| Məhsulun Ölçüləri (U x G x Y) | 17.52" x 6.1" x 8.27" |
| Maddə Çəkisi | 2.55 kq (5.61 funt) |
| Material | Metal (connections) |
| Daxil olan komponentlər | Battery Garden Pump, Key for Water Fill and Drain Screw |
| Batareya və şarj cihazı | Not included (Power X-Change system) |
9. Zəmanət və Dəstək
Zəmanət Məlumatı
Einhell products are manufactured to high-quality standards and undergo strict quality controls. The warranty period for this product is typically 2 years from the date of purchase, as per EU regulations for spare part availability. Please retain your proof of purchase for any warranty claims.
The warranty does not cover damage caused by improper use, normal wear and tear, or failure to follow the instructions in this manual.
Müştəri dəstəyi
For technical assistance, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website. Contact details can usually be found in the packaging or on the Einhell corporate websayt.