FOUNCY CS-MDE326BL

FOUNCY Battery Replacement for Mindeo 3260, CS3260, CS3290 Instruction Manual

1. Giriş

This manual provides essential instructions for the safe and effective use of your FOUNCY replacement battery, model CS-MDE326BL. This battery is designed as a compatible replacement for Mindeo devices requiring part numbers 3260, CS3260, and CS3290. Please read this manual thoroughly before installation and use to ensure proper operation and safety.

2. Təhlükəsizlik Məlumatı

Your FOUNCY replacement battery is a Lithium-ion battery. Handle with care and observe the following safety precautions to prevent injury or damage.

  • Sökməyə çalışmayın or modify the battery.
  • Replace only with the specified battery pack. Using an incompatible battery may pose a risk of fire or explosion.
  • Do not crush, puncture, short circuit, or dispose of the battery in fire or water.
  • Do not store above 60°C (140°F). Yüksək temperatur batareyaya zərər verə bilər və yanğın təhlükəsi yarada bilər.
  • A new battery pack must be fully charged before its first use to reduce the risk of fire or injury.
  • The battery features built-in multiple circuit protection against over-charging, over-current, over-voltage, short-circuit, and high-temperature.
  • Limited Charge Voltage: 4.2V ± 0.05V.
FOUNCY Lithium-ion replacement battery with label showing model number and safety warnings.

Image 1: FOUNCY Lithium-ion replacement battery with its label clearly visible, detailing model number and safety warnings.

3. Məhsul bitdiview

The FOUNCY CS-MDE326BL is a high-quality Lithium-ion replacement battery designed for specific Mindeo devices. It offers reliable performance and includes essential safety features.

Əsas Xüsusiyyətlər:

  • Batareya növü: Li-ion
  • Cildtage: 3.7V
  • Tutum: 1900mAh / 7.03Wh
  • Ölçülər: 51.70 x 19.80 x 18.70 mm
  • Çəki: 108.0 q
  • Built-in multiple circuit protection (over-charging, over-current, over-voltage, short-circuit, high-temperature protection).

Xüsusiyyətlər:

AtributDəyər
Məhsul Ölçüləri0.78 x 0.74 x 2.04 düym (51.70 x 19.80 x 18.70 mm)
Element Model nömrəsiCS-MDE326BL
BrendFOUNCY
Vahid sayı1 sayı
İstehsalçıFOUNCY
FOUNCY replacement battery next to a Mindeo barcode scanner, illustrating compatibility.

Image 2: The FOUNCY replacement battery shown alongside a compatible Mindeo barcode scanner, demonstrating its intended use.

4. Quraşdırma və Quraşdırma

Follow these general steps to install the replacement battery. Always refer to your specific Mindeo device's instruction manual for detailed battery replacement procedures, as steps may vary.

  1. Cihazı söndürün: Ensure your Mindeo device is completely powered off before attempting battery replacement.
  2. Batareya bölməsini tapın: Identify and open the battery compartment on your Mindeo device. This usually involves removing a cover or panel.
  3. Köhnə batareyanı çıxarın: Carefully disconnect the old battery from its connector and remove it from the compartment.
  4. Yeni Batareyanı Yerləşdirin: Connect the FOUNCY replacement battery's connector to the device's battery port. Ensure the connector is properly aligned and securely seated.
  5. Batareyanın yeri: Place the new battery into the compartment, ensuring it fits snugly without forcing.
  6. Bölməni bağlayın: Batareya bölməsinin qapağını etibarlı şəkildə bağlayın.
  7. İlkin ödəniş: As per safety guidelines, fully charge the new battery before its first use.
Close-up of the battery's white two-pin connector with red and black wires.

Şəkil 3: Ətraflı view of the battery's two-pin connector, showing the red and black wires, crucial for proper connection.

5. Əməliyyat Təlimatları

Once installed and fully charged, the FOUNCY replacement battery operates like the original battery in your Mindeo device.

  • Doldurulur: Use only the charger provided with your Mindeo device or a compatible charger.
  • İstifadəsi: The battery will power your device for its intended operational duration. Battery life will vary based on device usage and settings.
  • Monitorinq: Pay attention to your device's battery indicator to know when recharging is necessary.

6. Baxım

Proper maintenance can extend the life of your battery.

  • Həddindən artıq temperaturdan çəkinin: Do not expose the battery to extreme heat or cold. Store it in a cool, dry place when not in use.
  • Daimi şarj: For optimal performance, avoid completely draining the battery frequently. Recharge it before it reaches critically low levels.
  • Uzunmüddətli saxlama: If storing the battery for an extended period, charge it to about 50-60% capacity and store it in a cool, dry place. Recharge it every few months to prevent deep discharge.
  • Təmizləmə: Keep the battery contacts clean and free of dust or debris. Use a dry, soft cloth if cleaning is necessary.

7. Giderme

Batareyanızla bağlı problemlərlə qarşılaşsanız, aşağıdakıları nəzərdən keçirin:

  • Cihaz işə düşmür:
    • Batareyanın düzgün quraşdırıldığından və tam doldurulduğundan əmin olun.
    • Verify the battery connector is securely attached.
  • Qısa Batareya Ömrü:
    • Confirm the battery has been fully charged.
    • Check if the device's power settings or usage patterns are contributing to rapid discharge.
    • Ensure the battery is not exposed to extreme temperatures during use.
  • Doldurma Problemləri:
    • Ensure the charger and charging cable are functioning correctly.
    • Verify the charging port on your device is clean and undamaged.

If problems persist, please contact FOUNCY customer support.

8. Zəmanət və Dəstək

FOUNCY stands behind the quality of its products.

  • Pul Geri Zəmanət: 30 günlük pul geri zəmanətindən yararlanın.
  • Zəmanət: A 12-month warranty is provided for any quality issues.
  • Müştəri Dəstəyi: For assistance, please contact our 24/7 email support.

FOUNCY Replacement Battery Manual - Model: CS-MDE326BL

© 2024 FOUNCY. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.