FLYLINKTECH BD20 Car Jump Starter with Air Compressor User Manual

Giriş

Thank you for choosing the FLYLINKTECH BD20 Car Jump Starter with Air Compressor. This versatile device is designed to provide reliable assistance for your vehicle, offering powerful jump-starting capabilities, a convenient tire inflator, a portable power bank, and an emergency LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.

Təhlükəsizlik Məlumatı

Cihazın və avtomobilinizin zədələnməsinin və ya zədələnməsinin qarşısını almaq üçün həmişə aşağıdakı təhlükəsizlik tədbirlərinə əməl edin:

• Cihazı işə salmazdan əvvəl bütün təlimatları diqqətlə oxuyun.
• Cihazı uşaqlardan uzaq tutun.
• Do not short-circuit the jump starter terminals.
• Do not expose the device to extreme temperatures (above 60°C or below -20°C) or water.
• Ensure correct polarity when connecting to a vehicle battery (red clamp müsbət, qara clamp to negative). Incorrect connection can cause damage.
• If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again.
• cl-ni ayırınamps from the vehicle battery immediately after the vehicle starts.
• When using the air compressor, do not overinflate tires or other objects. Monitor the pressure carefully.
• The intelligent safety clamps are designed with protection features, including reverse polarity protection and short-circuit protection, indicated by the display and audible warnings. Pay attention to these warnings.

Qutuda nə var

Qutunu diqqətlə açın və bütün əşyaların mövcud olduğundan əmin olun:

• 1 x FLYLINKTECH BD20 Car Jump Starter with Air Compressor
• 1 x Jumper Cable with Smart Clamps
• 1 x USB-C kabeli
• 1 x DC Cigarette Lighter Adapter
• 1 x Hava Şlanqı
• 3 x Valve Adapters (for various inflatables)
• 1 x İstifadəçi Təlimatı
• 1 x Portable EVA Carrying Case

Image: Contents of the FLYLINKTECH BD20 box, showing the jump starter unit, jumper cables with clamps, USB-C cable, DC cigarette lighter adapter, air hose, three valve adapters, user manual, and a portable EVA carrying case.

Məhsul Bitdiview

The FLYLINKTECH BD20 combines multiple essential automotive tools into one compact device. Familiarize yourself with its key components and functions:

Image: The FLYLINKTECH BD20 Car Jump Starter with Air Compressor, displaying its main unit with a large digital screen and control buttons.

Əsas Xüsusiyyətlər:

• 5000A Peak Current Jump Starter: Capable of starting all gas engines and up to 10.0L diesel engines, even in extreme temperatures (-20°C to 60°C).


Image: The FLYLINKTECH BD20 jump starter with its smart clamps connected to a car battery, showing a digital display indicating 88.8V and 'READY' for jump-starting.

• 150PSI Powerful Tire Inflator: Integrated air compressor with a detachable hose and preset function for automatic stopping once the desired pressure is reached. Real-time pressure display on the LCD screen.

Image: The FLYLINKTECH BD20 unit with its air hose connected to a car tire, displaying '2.30 BAR' on its screen, indicating its function as a tire inflator.
• 20000mAh Versatile Power Bank: Equipped with two USB output ports (including one Quick Charge 3.0) and a 12V-16V/10A DC output, compatible with various electronic devices like smartphones, tablets, and car accessories.


Image: The FLYLINKTECH BD20 unit connected via USB cables to charge a smartphone and a tablet, demonstrating its power bank functionality with a '100% IN' display.

• Təcili LED İşıq: Built-in LED light with three modes: Torch, Strobe, and SOS, useful for roadside emergencies or outdoor activities.


Image: The FLYLINKTECH BD20 unit with its powerful LED light activated, illustrating its use as an emergency light with text overlays 'SOS', 'STABLE', and 'STROBE'.

Quraşdırma

İlkin Doldurulma

Before first use, fully charge the FLYLINKTECH BD20. Use the provided USB-C cable to connect the device to a USB wall adapter (not included) or a car charger. The LCD screen will indicate the charging status and battery level. A full charge typically takes several hours.

Batareya səviyyəsinin yoxlanılması

Press the power button briefly to check the current battery level on the LCD screen. Ensure the device has at least 50% charge before attempting to jump-start a vehicle.

Əməliyyat Təlimatları

Avtomobili işə salmaqla tullanmaq

1. Ensure the jump starter is adequately charged.
2. Insert the blue plug of the smart jumper cable into the jump starter's dedicated port. Ensure a firm connection.
3. Qırmızı (+) cl-ni birləşdirinamp avtomobilin akkumulyatorunun müsbət terminalına.
4. Qara (-) cl-ni birləşdirinamp avtomobilin akkumulyatorunun mənfi terminalına.
5. Ağıllı cihazı yoxlayınamp's display. If it shows "READY" and a green light, proceed to start the vehicle. If an error message or red light appears, check connections and battery voltage.
6. Nəqliyyat vasitəsinin mühərrikini işə salın.
7. Avtomobil işə düşdükdən sonra dərhal qara (-) clamp from the car battery, followed by the red (+) clamp.
8. Disconnect the smart jumper cable from the jump starter.

Image: A four-panel diagram illustrating the steps to jump-start a car: 1. Insert the smart clamp plug into the jump starter. 2. Connect clamps to the car battery. 3. Start the vehicle. 4. Remove clamps.

Hava kompressorundan istifadə

1. Connect the air hose to the air output port on the jump starter.
2. Attach the appropriate valve adapter to the tire or inflatable object.
3. Turn on the jump starter. The LCD screen will display the current pressure.
4. İstədiyiniz təzyiqi təyin etmək üçün '+' və '-' düymələrindən istifadə edin.
5. Press the 'PUMP' button to start inflation. The compressor will automatically stop once the preset pressure is reached.
6. Monitor the pressure on the LCD screen during inflation.

Power Bank kimi istifadə

1. Connect your electronic device (smartphone, tablet, etc.) to one of the USB output ports using a compatible USB cable.
2. For 12V-16V devices, use the DC output port with the provided DC cigarette lighter adapter.
3. The device will automatically begin charging. The LCD screen may show the output status.

LED işığından istifadə

1. Press and hold the light button to turn on the LED light in Torch mode.
2. Press the light button again to switch to Strobe mode.
3. Press the light button a third time to activate SOS mode.
4. Press the light button a fourth time to turn off the LED light.

Baxım

• Doldurulur: To maintain battery health, recharge the jump starter every 3-6 months, even if not in use.
• Yaddaş: Store the device in a cool, dry place, away from direct sunlight and moisture. Use the provided EVA carrying case for protection.
• Təmizləmə: Cihazı yumşaq, quru bir parça ilə təmizləyin. Sərt kimyəvi maddələr və ya aşındırıcı materiallardan istifadə etməyin.

Problemlərin aradan qaldırılması

If you encounter issues with your FLYLINKTECH BD20, refer to the following common problems and solutions:

• Cihaz açılmır: Ensure the device is charged. If the battery is completely depleted, it may take a few minutes of charging before the screen activates.
• Nəqliyyat vasitəsi işə düşmür:
  • Ağıllı cihazın işlədiyini yoxlayınamps düzgün batareya terminallarına (qırmızıdan müsbətə, qaradan mənfiyə) etibarlı şəkildə qoşulub.
  • Ensure the jump starter has sufficient charge (at least 50%).
  • If the smart clamp display shows an error, refer to the clamp's specific error codes (if available) or disconnect and reconnect.
  • Wait 30 seconds between jump-start attempts to allow the device to cool.
• Air compressor not working:
  • Check that the air hose is securely connected to both the device and the tire valve.
  • Ensure the jump starter has enough battery charge.
  • Verify that a target pressure has been set.
• Devices not charging via USB/DC: Ensure the jump starter is powered on and has sufficient charge. Check cable connections.

Problemlər davam edərsə, müştəri dəstəyi ilə əlaqə saxlayın.

Spesifikasiyalar

Zəmanət və Dəstək

Hissələrin mövcudluğu

FLYLINKTECH ensures the availability of spare parts for the BD20 model for a period of 3 years from the date of purchase.

Müştəri dəstəyi

If you have any questions, concerns, or require technical assistance with your FLYLINKTECH BD20 Car Jump Starter with Air Compressor, please do not hesitate to contact our customer support team. Refer to the contact information provided in your product packaging or visit the official FLYLINKTECH webdəstək detalları üçün sayt.