XCQQ S8L-Elongated

XCQQ S8L-Elongated Bidet Toilet Seat User Manual

Model: S8L-Elongated (Panel Control)

1. Giriş

Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.

XCQQ S8L-Elongated Bidet Toilet Seat with control panel

Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.

2. Əhəmiyyətli Təhlükəsizlik Məlumatı

Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.

  • Elektrik tələbləri: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
  • Su təchizatı: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
  • Çəki limiti: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
  • Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
  • Təmizləmə: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
  • Children and Individuals with Reduced Capabilities: Bu cihaz 8 yaşdan yuxarı uşaqlar və fiziki, duyğu və ya əqli imkanları zəif olan və ya təcrübə və biliyi olmayan şəxslər tərəfindən nəzarət və ya cihazın təhlükəsiz şəkildə istifadəsi ilə bağlı təlimat verilmiş və bununla bağlı təhlükələri başa düşdüyü halda istifadə edilə bilər. . Uşaqlar cihazla oynamamalıdır. Təmizləmə və istifadəçi baxımı nəzarətsiz uşaqlar tərəfindən aparılmamalıdır.

3. Paketin məzmunu

Quraşdırmaya başlamazdan əvvəl bütün komponentlərin mövcud olduğunu yoxlayın:

  • XCQQ Bidet Toilet Seat
  • 3-way Valve + DMT Pipe (Pre-Installed)
  • Bərkitmə lövhəsi
  • Mounting Hardware (screws, rubber expansion nuts)
  • Təlimat kitabçası (bu sənəd)

4. Məhsulun xüsusiyyətləri

The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:

  • Warm Water Wash: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
  • Qızdırılan oturacaq: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
  • İsti hava quruducusu: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
  • Yumşaq Bağlanan Qapaq: Çarpmanın qarşısını alır və səs-küyü azaldır.
  • Gecə işığı: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
  • Özünü Təmizləyən Burun: A stainless steel nozzle that performs self-cleaning before and after each use.
  • LED ekran: Real-time display of water temperature, seat temperature, and drying temperature.
  • Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outagvə).
  • Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.
Heated toilet seat and warm air drying features

Image 4.1: Illustration of the heated toilet seat and warm air drying functions.

Soft-close lid and LED night light features

Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.

Diagram showing female, rear, oscillating, and self-cleaning nozzle functions

Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.

5. Quraşdırma təlimatı

Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.

Diagram showing measurements for elongated and round toilets, and outlet requirement

Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.

Quraşdırmadan əvvəl yoxlama:

  • Turn off the water supply to your toilet.
  • Flush the toilet to drain the tank.
  • Remove your existing toilet seat and lid.

Addım-addım quraşdırma:

  1. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
    Hand holding down buckle to remove fixing plate

    Image 5.2: Removing the fixing plate from the bidet seat.

  2. Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
    Screwdriver securing fixing plate to toilet bowl

    Image 5.3: Securing the fixing plate to the toilet bowl.

  3. Attach Bidet Unit: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
    Hand pushing bidet unit onto fixing plate

    Image 5.4: Attaching the bidet unit to the fixing plate.

  4. Su təchizatını birləşdirin: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
    Diagram showing water connection from toilet tank to bidet via 3-way valve

    Image 5.5: Connecting the bidet to the toilet's water supply.

  5. Su və Gücü bərpa edin: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.

Initial Power-On and Water Spray Check:

When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes:

  1. Unplug the bidet.
  2. Su klapanını söndürün.
  3. 3-5 dəqiqə gözləyin.
  4. Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.
Attention warning regarding LED light blinking during initial setup

Image 5.6: Important attention notice for initial power-on and LED light behavior.

6. Əməliyyat

The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:

Close-up of the bidet's side control panel with labeled buttons

Şəkil 6.1: Ətraflı view of the side control panel, indicating various function buttons.

İdarəetmə Panelinin Funksiyaları:

  • Güc: Cihazı yandırır/söndürür.
  • Dayan: Stops any active washing or drying function.
  • Sprey: Initiates a general wash.
  • Bidet: Initiates a feminine wash.
  • Turbo Wash: Provides a stronger, more focused wash.
  • Qurutma: Activates the warm air dryer.
  • Avtomatik: Starts an automatic washing and drying cycle with a single touch.
  • İşıq: Toggles the LED night light on/off.
  • Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
  • Nozzle Position (FR/BK): Adjusts the nozzle's forward or backward position.
  • Su Temp: Adjusts the water temperature.
  • Oturacaq Temperaturu: Qızdırılan oturacaq temperaturunu tənzimləyir.
  • Yaddaş: Saves current settings for personalized use.
LED display showing real-time data and automatic function button

Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.

7. Baxım

Daimi Təmizlik:

  • Nozzle Təmizləmə: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
  • Bölmənin təmizlənməsi: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
  • Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
  • Xarici: Wipe down the exterior surfaces, including the control panel, with a soft, damp parça.

Uzunmüddətli saxlama:

If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.

8. Giderme

Bu bölmədə qarşılaşa biləcəyiniz ümumi problemlərə toxunulur. Problem davam edərsə, zəhmət olmasa müştəri dəstəyi ilə əlaqə saxlayın.

ProblemMümkün SəbəbHəll
Enerji yoxdur / Cihaz açılmırUnit unplugged; GFCI tripped; Power outage.Ensure the unit is securely plugged into a GFCI outlet. Reset the GFCI if tripped. Check household power supply.
LED light blinks continuously for more than 5 minutes after power-onInitial water fill incomplete or system error.Unplug the bidet, turn off the water valve, wait 3-5 minutes, then plug it back in without operating functions. The light should stop blinking within 1 minute. Ensure water supply is fully open.
No water spray / Weak water pressureWater supply valve closed; Nozzle clogged; Water pressure setting too low.Ensure the toilet's water supply valve is fully open. Check for any kinks in the water hose. Clean the nozzle if visibly clogged. Adjust water pressure settings on the control panel.
Heated seat not warm / Water not warmTemperature settings too low; Power save mode active.Adjust seat and water temperature settings on the control panel. Disable power save mode if applicable.
Air dryer not working / Air too hotDrying function not activated; Temperature setting incorrect.Activate the drying function. Adjust the drying temperature settings on the control panel.
Lid closes too quickly / Does not stay openImproper installation or alignment.Recheck the installation of the fixing plate and bidet unit to ensure proper alignment and secure attachment.

9. Spesifikasiyalar

XüsusiyyətDetal
BrendXCQQ
Model nömrəsiXCQQ-S8L
StilS8L-Elongated (Panel Control)
Rəng
MaterialAkrilonitril Butadien Stirol (ABS)
FormaOval
Məhsul Ölçüləri20.1 x 17.5 x 5.5 düym
Maddə Çəkisi12.27 funt sterlinq
Güc mənbəyiAC
Cildtage120 volt
Wattage1300 vatt
Temperature Range (Water/Seat)59 - 95 Degrees Fahrenheit (Adjustable up to 102°F / 39°C)
Maksimum Çəki Tutumu280 funt sterlinq
Fiş FormatıB - torpaqlama fişi ilə ABŞ üslubunda

10. Zəmanət və Dəstək

Zəmanət Məlumatı: Please refer to the product packaging or the official XCQQ webətraflı zəmanət şərtləri üçün sayt. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.

Müştəri Dəstəyi: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand websayt.

© 2025 XCQQ. All rights reserved.