XCQQ-S8R Round Bidet Toilet Seat User Manual

1. Giriş

This manual provides detailed instructions for the installation, operation, and maintenance of your XCQQ-S8R Round Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Təhlükəsizlik Məlumatı

Observe all safety precautions to prevent injury or damage to the product. This electric bidet is equipped with built-in detection sensors that monitor water temperature, seat temperature, water pressure, and drying level in real-time. In the event of an abnormal situation, the unit will stop working automatically to enhance safety.

• Ensure the power outlet meets the specified voltage (120 Volts) and has a ground plug.
• Do not immerse the unit in water or spray water directly onto electrical components.
• Always turn off the water supply and unplug the unit before performing any maintenance or cleaning.
• Əməliyyat zamanı uşaqları cihazdan uzaq tutun.

3. Paketin məzmunu

Quraşdırmaya başlamazdan əvvəl bütün komponentlərin mövcud olduğunu yoxlayın:

• Bidet toilet seat
• 3-way valve + DMT pipe (Pre-Installed)
• Bərkitmə lövhəsi
• Mounting hardware (rubber expansion nuts, metal adjustment sheets, screws)
• Təlimat kitabçası (bu sənəd)

4. Məhsulun Spesifikasiyası

5. Quraşdırma təlimatı

Before installation, ensure your toilet is compatible with a round bidet seat and that a grounded electrical outlet is available nearby. Refer to the toilet size diagram below to confirm compatibility.

Image: Toilet size compatibility guide for round and elongated seats, indicating an outlet is required.

Quraşdırmadan əvvəl yoxlama:

• Ensure the water supply valve is turned off before starting.
• Bütün paket məzmununun mövcudluğunu təsdiqləyin.

Quraşdırma addımları:

1. Insert Expanding Rubber Bolts: Insert the expanding rubber bolts into the toilet holes.
   

   Image: Rubber bolts placed into the toilet seat mounting holes.
2. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
   

   Image: A hand releasing the fixing plate from the bidet seat.

3. Secure Fixing Plate: Press the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate to the toilet.
   

   Image: Securing the fixing plate to the toilet using screws.

4. Bide oturacağını əlavə edin: Push the bidet unit onto the fixing plate while holding down the buckle until the plate slides into the bottom of the unit completely.
   

   Image: Attaching the bidet seat to the fixing plate.
5. Su təchizatını birləşdirin: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the DMT pipe and filter as shown in the video.
   

   Image: Components for water connection, including the 3-way valve and DMT pipe.

6. Açıq Su Təchizatı: Once all connections are secure, slowly open the water supply valve. Wait 3-5 minutes for the bidet to fill with water.
7. Qoşun: After the bidet has filled with water, plug the power cord into a grounded electrical outlet.

Quraşdırma Video Bələdçisi:

Vacib Qeyd:

When the power is activated, the LED light will start to blink, and the spray bar will automatically extend (without spray) and water will flow down the bar into the toilet. This is the unit performing a water spray check. The blue light will stop blinking in 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes, unplug the bidet and turn off the water valve. Turn on the water valve first, wait 3-5 minutes, then plug it in and do not operate any functions. The blue light will stop blinking in 1 minute automatically.

6. Əməliyyat Təlimatı

The XCQQ-S8R bidet toilet seat features an integrated side control panel and an LED display for easy operation. The unit will remember your customized settings for water pressure, temperature, nozzle position, and heated seat temperature after each adjustment (re-memory required after power outagvə).

İdarəetmə Paneli bitdiview:

Image: Side control panel with buttons for various bidet functions.

• Sprey: Activates posterior wash.
• Bidet: Activates feminine wash.
• Turbo Wash: Daha güclü bir yuma təmin edir.
• Qurutma: Activates the warm air dryer.
• Avtomatik: Initiates an automatic wash and dry cycle.
• İşıq: Controls the night light feature.
• Su Temp: Adjusts water temperature (5 settings, room temp to 102℉).
• Oturacaq Temperaturu: Adjusts heated seat temperature (4 settings, room temp to 102℉).
• Nozzle Position: Adjusts the spray nozzle's position.
• Dayan: Halts all active functions.

Əsas Xüsusiyyətlər:

Qızdırılan Tualet Oturacağı

Image: The bidet seat with a visible warm glow, illustrating the heated seat feature.

Enjoy comfort with 4 adjustable heating levels for the seat, from room temperature up to 102℉.

İsti hava qurutma

Image: The bidet seat's warm air dryer in action, showing air currents.

An efficient air drying system with 5 adjustable temperature settings provides a hands-free experience.

Yumşaq Yaxın Qapaq

Image: The soft-close lid mechanism, preventing loud noises.

The soft damper closing design ensures the lid closes quietly and gently.

Toilet LED Night Light

Image: The bidet's LED night light illuminating the toilet bowl.

Equipped with LED night lights and a beep-off mode to avoid disturbing others at night.

Real-Time Məlumat Ekranı

Image: The LED display showing real-time data.

The LED screen displays the status of the unit in real-time, including water temperature, seat temperature, and drying temperature.

Multiple Cleaning Styles

Image: Illustrations of various cleaning modes and the stainless steel nozzle.

Features include Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self Cleaning for comprehensive hygiene.

Əməliyyat Video Bələdçisi:

7. Baxım

Regular cleaning and maintenance will ensure the longevity and optimal performance of your bidet toilet seat.

• Nozzle Təmizləmə: The bidet features a self-cleaning nozzle. For additional cleaning, gently wipe the nozzle with a soft cloth and mild, non-abrasive cleaner.
• Xarici Təmizlik: Wipe the exterior surfaces of the bidet seat with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or brushes that could scratch the surface.
• Filtr Baxımı: The DMT pipe includes a filter. Periodically check the filter for debris and clean or replace it as necessary to maintain water flow and quality.
• Elektrik kəsilməsi: Always unplug the unit from the electrical outlet and turn off the water supply before performing any deep cleaning or maintenance.

8. Giderme

If you encounter issues with your XCQQ-S8R bidet toilet seat, refer to the following common solutions:

Bu həll yollarına cəhd etdikdən sonra problem davam edərsə, müştəri dəstəyi ilə əlaqə saxlayın.

9. Zəmanət və Dəstək

For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official XCQQ website. Our customer service team is available to assist you with any questions or concerns regarding your bidet toilet seat.

İstehsalçı: XCQQ

Websayt: XCQQ Official Store on Amazon