UIBI X3 & X7 Jump Starter with Air Compressor User Manual

1. Giriş

Thank you for choosing the UIBI X3 or X7 Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a high-performance tire inflator, a portable power bank, and an emergency LED light. Designed for convenience and safety, it is an essential tool for any vehicle owner, providing reliable assistance for dead batteries, flat tires, and charging needs on the go.

This manual will guide you through the proper use, maintenance, and troubleshooting of your UIBI jump starter. Please read it thoroughly before first use to ensure safe and optimal performance.

2. Təhlükəsizlik Məlumatı

Always observe the following safety precautions to prevent injury or damage to the device and your vehicle.

• Bütün Təlimatları Oxuyun: Before operating the jump starter, read and understand all safety information and operating instructions.
• Gözün qorunması: Always wear safety glasses when working with batteries.
• Havalandırma: Ensure adequate ventilation when jump starting a vehicle.
• Qığılcımın qarşısının alınması: Avoid creating sparks near the battery. Do not smoke or allow open flames near the battery or jump starter.
• Polarite: cl-ni birləşdirinamps with correct polarity. Connecting incorrectly can cause damage to the device, battery, or vehicle.
• Uşaqlar və ev heyvanları: Cihazı uşaqların və ev heyvanlarının əli çatmayan yerdə saxlayın.
• Yaddaş: Cihazı birbaşa günəş işığından və həddindən artıq temperaturdan uzaq sərin, quru yerdə saxlayın.
• Damaged Device: Do not use the device if it is damaged, cracked, or leaking.
• Doldurulur: Only charge the device using the provided charging cable and a compatible adapter.
• Suya məruz qalma: Cihazı yağış və ya yaş şəraitə məruz qoymayın.

3. Paketin məzmunu

Bütün əşyaların paketinizdə olduğunu yoxlayın:

• UIBI X3 or X7 Jump Starter
• Ağıllı keçid kabelləri
• Air Hose with Nozzles (for various inflatables)
• USB-C şarj kabeli
• Saxlama qutusu
• İstifadəçi təlimatı

Şəkil 3.1: UIBI X3 and X7 Jump Starters shown with all included accessories, including smart jumper cables, air hose, various nozzles, and charging cables, neatly organized in their storage cases.

4. Məhsul bitdiview

Familiarize yourself with the components of your UIBI jump starter.

Şəkil 4.1: The UIBI X3 model, highlighting its digital display for battery level and pressure, and the control buttons for jump start, air compressor, and LED light functions.

Şəkil 4.2: The UIBI X7 model, featuring its larger digital display for real-time pressure and battery status, along with intuitive control buttons for various modes.

Əsas komponentlər:

• Digital Display: Shows battery level, air pressure (PSI, BAR, KPA, Kg/cm²), and operational modes.
• Güc düyməsi: Cihazı yandırır/söndürür.
• Rejim düyməsi (M): Switches between air compressor modes (e.g., car, motorcycle, bicycle, ball).
• +/- Düymələr: Adjusts target air pressure.
• Jump Start Port: For connecting smart jumper cables.
• Hava Şlanqı Portu: Hava hortumunu birləşdirmək üçün.
• USB-A Output (QC3.0): For charging electronic devices.
• Type-C PD45W Input/Output: For charging the jump starter and charging electronic devices.
• LED Fənər: Provides illumination, strobe, and SOS signals.

5. Quraşdırma

İlk istifadədən əvvəl, başlanğıcın tam doldurulduğundan əmin olun.

5.1 İlkin Doldurma

1. Connect the provided USB-C charging cable to the Type-C PD45W port on the jump starter.
2. USB-C kabelinin digər ucunu uyğun USB divar adapterinə qoşun (daxil deyil).
3. The digital display will show the charging progress. Charge until the battery indicator shows full.

Şəkil 5.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output.

A full charge typically takes approximately 2 hours with a PD45W charger.

6. Operating Instructions (Jump Starter)

Follow these steps to safely jump start your vehicle.

1. Maşını hazırlayın: Turn off the vehicle's ignition and all accessories (headlights, radio, A/C). Engage the parking brake.
2. Connect Jumper Cables to Jump Starter: Insert the blue plug of the smart jumper cables into the jump start port on the UIBI device. Ensure a firm connection.
3. Bağlayın ClampBatareyaya:
   • birləşdirin QIRMIZI (+) clamp üçün müsbət (+) terminal of the vehicle's battery.
   • birləşdirin QARA (-) clamp üçün mənfi (-) terminal of the vehicle's battery.

   The smart jumper cables will beep if an incorrect connection is detected. Correct the connection before proceeding.
4. Maşını işə salın: Bir dəfə clamps are correctly connected and the indicator on the smart cable is solid green (or as per cable indicator), start your vehicle's engine.
5. Cl çıxarınamps: Once the vehicle starts, immediately remove the BLACK (-) clamp first, then the RED (+) clamp from the battery. Disconnect the smart jumper cables from the UIBI device.

Şəkil 6.1: The UIBI X7 Jump Starter connected to a car battery, demonstrating the proper setup for jump-starting a vehicle. The display shows '8.8.8' indicating readiness.

Şəkil 6.2: The UIBI X3 Jump Starter connected to a car battery, illustrating the connection of the smart clamps to the battery terminals for a quick and safe jump start.

Qeyd: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not attempt more than 3 consecutive jump starts.

7. Air Compressor Operation

The UIBI jump starter features a built-in air compressor for inflating tires and other inflatables.

1. Hava hortumunu birləşdirin: Screw the air hose into the air hose port on the jump starter.
2. Nozzle əlavə edin: Select the appropriate nozzle for your item (e.g., Schrader valve for car tires, needle for balls) and attach it to the end of the air hose.
3. Güc Aktivdir: Press the Power button to turn on the device. The display will show the current pressure.
4. Rejimi Seçin (İsteğe bağlı): Press the 'M' (Mode) button to cycle through preset inflation modes (e.g., car, motorcycle, bicycle, ball). Each mode has a default pressure, which can be adjusted.
5. Hədəf təzyiqini təyin edin: Use the '+' and '-' buttons to set your desired pressure.
6. İnflyasiyaya başlayın: Press the Power button again to start the air compressor. The display will show the real-time pressure.
7. Avtomatik söndürmə: Kompressor əvvəlcədən müəyyən edilmiş təzyiqə çatdıqda avtomatik olaraq dayanacaq.
8. Bağlantını kəsin: Unscrew the air hose from the item and the jump starter.

Şəkil 7.1: The UIBI X7 Jump Starter actively inflating a car tire, demonstrating its cordless air compressor function. The display shows the current PSI reading.

Şəkil 7.2: The UIBI X3 Jump Starter in use, inflating a car tire. This image highlights the multi-use air pump feature with auto-stop functionality.

8. Enerji Bankı Funksiyası

The UIBI jump starter can charge your electronic devices.

1. Cihazı birləşdirin: Use a compatible USB cable (not included) to connect your smartphone, tablet, or other electronic device to either the USB-A (QC3.0) output port or the Type-C PD45W port on the jump starter.
2. Güc Aktivdir: Press the Power button on the jump starter to activate the charging function.
3. Doldurulur: Your device will begin charging. The jump starter's display may show its remaining battery level.

Şəkil 8.1: The UIBI X7 model highlighting its Type-C PD45W port, indicating its fast charging capability for both input and output, allowing it to function as a portable power bank.

9. LED İşıq funksiyası

The integrated LED flashlight offers three modes for various situations.

1. Yandırın: Press and hold the LED light button (often integrated with the power button or a dedicated button) to turn on the flashlight.
2. Dəyişiklik rejimləri: Briefly press the LED light button repeatedly to cycle through the modes:
   • Stabil İşıq: Ümumi işıqlandırma üçün.
   • Strobe İşıq: Siqnal vermək və ya diqqəti cəlb etmək üçün.
   • SOS siqnalı: For emergency situations, emitting the Morse code SOS pattern.
3. Söndürün: Press and hold the LED light button again to turn off the light.

Şəkil 9.1: The UIBI X7 Jump Starter demonstrating its emergency LED light, capable of providing stable illumination, strobe, and SOS signals for various situations.

10. Cihazın doldurulması

To ensure your UIBI jump starter is always ready, recharge it after each use or when the battery level is low.

• Connect the provided USB-C charging cable to the Type-C PD45W input port on the jump starter.
• Connect the other end of the USB-C cable to a USB wall adapter (e.g., 5V/2A, 9V/2A, or PD45W compatible).
• The digital display will indicate the charging status. Charge until the battery icon shows full.
• It is recommended to fully charge the device every 3-6 months even if not in use to maintain battery health.

11. Baxım

Proper maintenance will extend the life of your UIBI jump starter.

• Təmizləmə: Cihazı yumşaq, quru bir parça ilə silin. Sərt kimyəvi maddələrdən və ya aşındırıcı təmizləyicilərdən istifadə etməyin.
• Yaddaş: Store the device in its carrying case in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures.
• Batareyaya qulluq: Recharge the device every 3-6 months to prevent deep discharge and prolong battery life.
• Kabel yoxlaması: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

12. Giderme

Problemlərlə qarşılaşsanız, aşağıdakı ümumi problemlərə və həll yollarına müraciət edin.

Bu həlləri sınadıqdan sonra problem davam edərsə, müştəri dəstəyi ilə əlaqə saxlayın.

13. Spesifikasiyalar

14. Zəmanət və Dəstək

UIBI products are designed and manufactured to the highest quality standards. For warranty information and customer support, please refer to the warranty card included in your package or visit the official UIBI website. If you have any questions or require assistance, do not hesitate to contact our customer service team.