ALUSSO WL-YDR-230P

ALUSSO WL-YDR-230P Motion Sensor Outdoor Flood Light Instruction Manual

Model: WL-YDR-230P

1. Giriş

Thank you for choosing the ALUSSO Motion Sensor Outdoor Flood Light. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions thoroughly before installation and retain them for future reference.

ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.

Image: ALUSSO 30W LED Security Light installed on a house, illuminating the front yard.

2. Təhlükəsizlik Məlumatı

WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the fuse or circuit breaker before installing or servicing.

  • Bu məhsul tətbiq olunan quraşdırma koduna uyğun olaraq məhsulun konstruksiyası və istismarı və bununla bağlı təhlükələr ilə tanış olan şəxs tərəfindən quraşdırılmalıdır.
  • Use only supplied accessories for installation.
  • Ensure the balancing mechanism is secure after installation.
  • Məhsulu dəyişdirməyin və ya dəyişdirməyin.
  • Yanan materialların yaxınlığında quraşdırmayın.
  • This fixture is Class II safety-rated and does not require a ground wire.

3. Paketin məzmunu

Verify that all components are present and undamaged before installation.

Diagram showing the ALUSSO flood light components and included accessories for installation.

Image: Diagram showing the ALUSSO flood light components and included accessories for installation.

  • ALUSSO Motion Sensor Outdoor Flood Light Unit (1)
  • Montaj Mötərizəsi (1)
  • Screws and Wall Anchors (Set)
  • Wire Connectors (Yellow Quick-Connects) (Set)
  • Waterproof Gasket (1)
  • Təlimat kitabçası (1)
  • Zəmanət kartı (1)

4. Məhsul bitdiview

The ALUSSO WL-YDR-230P is a versatile and durable outdoor security light designed to provide powerful illumination and enhanced safety for your property.

Bitdiview of ALUSSO 30W LED Security Light features including 3CCT, 3500LM, 40FT sensor distance, 150 degree detection angle, D2D, Auto, On Time modes, and wet location use.

Şəkil: Bitdiview of ALUSSO 30W LED Security Light features.

  • Power & Brightness: 30W, 3500 Lumens, covering up to 2000 sq. ft.
  • Color Temperature (3CCT): Adjustable between 3000K (Warm White), 4000K (Natural White), and 6500K (Daylight).
  • Operating Modes (3 Modes): Dusk to Dawn (D2D), Auto (Motion Mode), and On Time (Always On).
  • Hərəkət Sensoru: 150° wide-angle detection with an adjustable range of 1-40 ft.
  • Tənzimlənən başlıqlar: Dual adjustable light heads provide a 100° beam angle, allowing precise light direction.
  • Davamlılıq: IP65 waterproof rating, UV resistant, and cold resistant for all-weather performance.
  • Təhlükəsizlik: Class II safety-rated, requiring no ground wire.

5. Quraşdırma və Quraşdırma

This flood light is designed for hardwired installation. Ensure power is disconnected before proceeding.

  1. Gücü söndürün: İşıqlandırma cihazını idarə edən elektrik açarını tapın və elektrik enerjisini söndürün.
  2. Naqilləri hazırlayın: If replacing an existing fixture, carefully remove it. Ensure the existing wires (Live and Neutral) are accessible.
  3. Montaj braketini quraşdırın: Attach the provided mounting bracket to your standard 3" or 3.5" round junction box. Use the appropriate screws and anchors for your mounting surface (wall or soffit).
  4. Telləri birləşdirin: Use the yellow quick-connect terminals to securely connect the light's wires to your household wiring. Connect the white wire from the fixture to the neutral wire, and the black wire from the fixture to the live wire. This is a Class II fixture, so no ground wire connection is needed.
  5. Armatur əlavə edin: Carefully align the flood light unit with the mounting bracket. Ensure the waterproof gasket is properly seated between the fixture and the mounting surface to prevent moisture ingress. Secure the fixture with the provided screws.
  6. İşıq başlıqlarını tənzimləyin: Loosen the wing nuts on the light heads to adjust their angle and direction as needed. Tighten the wing nuts to secure the position.
  7. Tövsiyə olunan quraşdırma hündürlüyü: For optimal sensor performance, install the light at a height of 6.56-9.84 feet (2-3 meters).
Installation steps for the ALUSSO flood light, showing bracket mounting and wire connections.

Image: Installation steps for the ALUSSO flood light.

Diagram showing the ALUSSO flood light installed in both soffit mounted and wall mounted configurations.

Image: Soffit Mounted and Wall Mounted configurations.

6. Əməliyyat Təlimatları

Your ALUSSO flood light offers adjustable settings for optimal performance.

6.1. Color Temperature (CCT) Adjustment

A dip switch located on the back of the light fixture allows you to select the desired color temperature:

Image showing the 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K) for the ALUSSO flood light.

Image: 3 CCT options: Warm White (3000K), Natural White (4000K), and Daylight (6500K).

  • WW (İsti Ağ): 3000K
  • NW (Natural White): 4000K
  • CW (Daylight): 6500K

Note: Adjust the CCT switch before mounting the fixture for easier access.

6.2. İş rejiminin seçilməsi

A dip switch on the back of the motion sensor unit allows you to select one of three operating modes:

Diagram illustrating the three work modes of the ALUSSO flood light: Auto Mode, D2D Mode (Dusk to Dawn), and On Time Mode.

Image: Three work modes of the ALUSSO flood light.

  • D2D Mode (Dusk to Dawn): The light automatically turns on at sunset and turns off at sunrise. The motion sensor is inactive in this mode.
  • AUTO Mode (Motion Mode): The light activates when motion is detected within its range. It turns off after a set duration if no further motion is detected.
  • ON TIME Mode (Always On): The light is manually controlled via the wall switch. The motion sensor is disabled, and the light remains on until manually switched off.

6.3. Auto Mode Adjustments

When in AUTO Mode, three knobs on the bottom of the motion sensor allow for fine-tuning:

Close-up of the ALUSSO flood light's motion sensor with three adjustable knobs labeled LUX, SENS, and TIME.

Image: Motion sensor with LUX, SENS, and TIME adjustment knobs.

  • LUX (Brightness Sensitivity): Adjusts the ambient light level at which the motion sensor becomes active. Turn towards the sun icon for day and night operation, or towards the moon icon for night-only operation (5-2000 LUX).
  • SENS (Detection Range): Controls the sensitivity and detection distance of the motion sensor (1-40 ft).
  • TIME (Duration): Sets how long the light remains on after motion is detected and no further motion is sensed (10 seconds to 10 minutes).

Video: Official ALUSSO product video demonstrating features and modes.

7. Baxım

To ensure the longevity and optimal performance of your ALUSSO flood light, follow these maintenance guidelines:

  • Təmizləmə: Armaturu vaxtaşırı yumşaq bir vasitə ilə təmizləyin, damp Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin, çünki onlar örtüyə və ya elektrik komponentlərinə zərər verə bilər.
  • Yoxlama: Qurğuda hər hansı bir zədələnmə, boş birləşmələr və ya aşınma əlamətlərini mütəmadi olaraq yoxlayın. Hər hansı bir problemi dərhal həll edin.
  • Sensorun təmizlənməsi: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure accurate detection.
ALUSSO flood light shown in various weather conditions: UV resistant, wet location use, and cold resistant.

Image: ALUSSO flood light is durable in all weather conditions.

8. Giderme

If you experience issues with your flood light, refer to the following common problems and solutions:

ProblemMümkün SəbəbHəll
İşıq yanmır.No power, incorrect wiring, mode setting.Check circuit breaker. Verify wiring connections. Ensure correct operating mode is selected.
Hərəkət sensoru aşkarlanmır.Incorrect SENS/LUX settings, obstructions.Adjust SENS to maximum. Adjust LUX towards sun icon. Clear any obstructions from sensor's view.
İşıq davamlı olaraq yanır.TIME setting too long, continuous motion, D2D mode selected.Adjust TIME to a shorter duration. Ensure no constant motion in detection zone. Switch to AUTO mode if D2D is not desired.
İşıq titrəyir.Loose wiring, unstable power.Check all wire connections for tightness. Consult an electrician if power supply is unstable.

9. Spesifikasiyalar

XüsusiyyətSpesifikasiya
Model Adı30W Flood Lights Outdoor Motion Sensor
Hissə nömrəsiWL-YDR-230P
Wattage30 vatt
Parlaqlıq3500 lümen
Rəng temperaturu3000K/4000K/6500K (Adjustable)
Cildtage120 Volt (AC)
Hərəkət Algılama Bucağı150°
Hərəkət Algılama Aralığı1-40 ft (Adjustable)
Light Duration (Auto Mode)10 seconds - 10 minutes (Adjustable)
Suya davamlılıq səviyyəsiIP65 suya davamlı
Daxili / Xarici İstifadəÇöldə
Quraşdırma növüHardwired, Wall Mount/Soffit Mount
Məhsul Ölçüləri9.45"U x 6.9"W x 5.12"H
Maddə Çəkisi1.52 funt (0.69 kiloqram)
Orta Ömür30000 saat
Təhlükəsizlik reytinqiETL Listed, Class II (no ground wire required)

10. Zəmanət və Dəstək

ALUSSO provides a 3 il zəmanət for this product, as indicated on the packaging. Additionally, a 5-year manufacturer's coverage is offered, ensuring repair or replacement for any defects in materials or workmanship under normal use.

For any inquiries, technical support, or warranty claims, please contact ALUSSO customer service:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.