Ortis Above Ground Smart Pool Timer

1. Giriş

Thank you for choosing the Ortis Above Ground Smart Pool Timer. This device is designed to automate the operation of your pool pump and salt system, enhancing energy efficiency and simplifying your pool maintenance routine. Featuring dual waterproof outlets, a clear LCD display, and flexible timing functions, this timer is built for reliable outdoor performance. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the lifespan of your product.

2. Təhlükəsizlik Məlumatı

• Elektrik Təhlükəsizliyi: Always ensure the timer is connected to a properly grounded outlet. Do not immerse the timer in water.
• Maksimum yük: The total current for all connected appliances must not exceed 15 Amperes (15A). Overloading can cause damage to the timer and connected devices, and poses a fire hazard.
• Xarici istifadə: This timer is designed for outdoor use and features waterproof outlets. However, ensure all connections are secure and protected from direct water spray.
• Bağlantı kəsilməsi: Disconnect power before performing any maintenance or when the timer is not in use for extended periods.
• Uşaqlar: Uşaqların əli çatmadığı yerdə saxlamaq. Bu oyuncaq deyil.
• Zərər: Do not operate the timer if the cord, plug, or housing is damaged. Contact customer support for assistance.

3. Paketin məzmunu

Zəhmət olmasa paketi aşağıdakı maddələr üçün yoxlayın:

• Ortis Above Ground Smart Pool Timer (Model KJ-139)
• Təlimat kitabçası

4. Məhsul bitdiview

Familiarize yourself with the components of your Ortis Smart Pool Timer.

Şəkil 4.1: Ön view of the Ortis Smart Pool Timer, showing the LCD display, control buttons, and dual outlets (S1 and S2).

4.1. Komponentlər

• LCD displey: Shows current time, mode, and operational status.
• (M) Mode Button: Cycles through different operating modes (Countdown, 24H Auto Cycle).
• (T) Time Button: Cari vaxtı təyin etmək üçün istifadə olunur.
• (^) Up Button: Adjusts values upwards.
• (V) Down Button: Adjusts values downwards.
• Kilid düyməsi: Locks/unlocks the display to prevent accidental changes.
• (Manual) Button: Manually turns outlets S1/S2 ON or OFF.
• (Time ON) Button: Used in 24H Auto Cycle mode to set ON times.
• (Güc düyməsi: Turns the timer unit ON/OFF.
• S1 & S2 Outlets: Dual waterproof outlets for connecting appliances.
• Elektrik kabeli: Taymeri divar rozetkasına qoşur.

Şəkil 4.2: Ətraflı view of the LCD screen, showing time, mode, and status indicators.

Şəkil 4.3: View of the waterproof outlet covers, designed for outdoor protection.

5. Quraşdırma

5.1. Taymerin quraşdırılması

1. Choose a suitable location near your pool or water feature, ensuring it is within reach of a grounded outdoor power outlet and your appliances.
2. Mount the timer securely to a wall or sturdy post using appropriate screws (not included). Ensure it is at a height that allows for easy access to the display and buttons, and that the outlets face downwards to prevent water ingress.

Şəkil 5.1: The timer mounted on a wall, positioned for convenient access near a pool.

5.2. Enerjiyə qoşulma

1. Plug the timer's power cord into a grounded 120V AC outdoor electrical outlet.
2. The LCD display should illuminate. If not, press the Power button.

5.3. Məişət cihazlarının qoşulması

1. Open the waterproof covers for outlets S1 and S2.
2. Plug your pool pump into one outlet (e.g., S1) and your salt system or other appliance into the other outlet (e.g., S2).
3. Ensure the total current draw of all connected appliances does not exceed 15A.
4. Close the waterproof covers securely around the appliance plugs to maintain weather resistance.

Şəkil 5.2: The timer with a pool pump and salt chlorinator connected to its dual outlets.

6. Əməliyyat Təlimatları

6.1. Cari vaxtın qurulması

1. basın və saxlayın (T) Time saat rəqəmləri yanıb-sönənə qədər düyməsini basın.
2. istifadə edin (^) Up və (V) Down buttons to adjust the hour. Pay attention to AM/PM.
3. düyməsini basın (T) Time button again to move to minute adjustment. Use (^) Up və (V) Down dəqiqə təyin etmək.
4. düyməsini basın (T) Time button one more time to confirm and exit time setting.

6.2. Geri sayım rejimi

This mode allows you to set a specific duration for the connected appliances to run before automatically turning off.

1. düyməsini basın (M) Rejim button until "COUNTDOWN CYCLE MODE" appears on the display.
2. The hour digits for the countdown will flash. Use the (^) Up və (V) Down buttons to set the desired running hours.
3. düyməsini basın (M) Rejim button again to move to minute adjustment. Use (^) Up və (V) Down to set the desired running minutes.
4. düyməsini basın (M) Rejim button once more to confirm the countdown duration.
5. The timer will now display the countdown. The connected appliances will turn ON and run for the set duration, then turn OFF automatically.

6.3. 24H Auto Cycle Mode

This mode allows you to program daily ON/OFF schedules for your appliances.

1. düyməsini basın (M) Rejim button until "24H AUTO CYCLE MODE" appears on the display.
2. düyməsini basın (Time ON) button to enter program setting. The display will show "1 ON".
3. istifadə edin (^) Up və (V) Down buttons to set the desired ON time (hour and minute). Press (Time ON) to switch between hour and minute.
4. After setting the ON time, press (Time ON) yenidən. Ekranda "1 OFF" yazısı görünəcək.
5. istifadə edin (^) Up və (V) Down buttons to set the desired OFF time (hour and minute). Press (Time ON) to switch between hour and minute.
6. You can set multiple ON/OFF programs (e.g., 2 ON, 2 OFF, etc.) by repeating steps 3-5. The timer supports multiple programs.
7. Once all programs are set, press the (M) Rejim button to exit program setting and activate the 24H Auto Cycle mode. The timer will now follow your programmed schedule daily.

6.4. Manuel Təyinat

To manually turn the connected appliances ON or OFF, regardless of the programmed schedule:

• düyməsini basın (Əl ilə) button. Each press will cycle through ON, OFF, and AUTO modes for the outlets.
• In AUTO mode, the timer will follow the programmed schedule.

6.5. Kilid funksiyası

To prevent accidental changes to settings:

• basın və saxlayın Kilidləyin button for approximately 3 seconds to lock the keypad. A lock icon will appear on the display.
• Repeat the action to unlock the keypad. The lock icon will disappear.

7. Baxım

• Təmizləmə: Disconnect the timer from power before cleaning. Wipe the exterior with a soft, damp parça. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
• Yoxlama: Regularly inspect the power cord, plug, and outlets for any signs of damage or wear. Ensure waterproof covers are intact and properly sealed.
• Yaddaş: If storing the timer for an extended period, disconnect it from power, clean it, and store it in a dry, cool place away from direct sunlight.

8. Giderme

9. Spesifikasiyalar

• Model: KJ-139
• Giriş həcmitage: 120V AC, 60Hz
• Maksimum yük: 15A / 1800W
• Satış nöqtələri: 2 Torpaqlı Çıxışlar
• İş rejimləri: Countdown, 24H Auto Cycle, Manual
• Ekran: LCD
• Ölçülər (Y x G x D): Təxminən 4.9" x 3.3" x 3.9"
• Elektrik kabelinin uzunluğu: Təxminən 4.7 fut
• Ekoloji Reytinq: Outdoor Rated, Waterproof Outlets

Şəkil 9.1: Product dimensions of the Ortis Smart Pool Timer.

10. Zəmanət və Dəstək

10.1. Zəmanət Məlumatı

Ortis products are manufactured to high-quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, improper installation, unauthorized repairs, or natural disasters.

10.2. Müştəri dəstəyi

If you have any questions, require assistance with setup, or encounter any issues not covered in this manual, please contact Ortis customer support. Refer to the product packaging or the Ortis brand store on Amazon for contact details.