Dickson TM320 Temperature and Humidity Data Logger

1. Giriş

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo Display: Clear and easy-to-read real-time measurements.
• İstifadəsi asan: Intuitive interface for straightforward operation.

2. Təhlükəsizlik Məlumatı

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Yalnız müəyyən edilmiş enerji mənbələrindən və aksesuarlarından istifadə edin.
• Cihazı özünüz açmağa və ya təmir etməyə çalışmayın. Bütün xidmətlər üçün ixtisaslı işçilərə müraciət edin.
• Uşaqların əli çatmayan yerdə saxlayın.

3. Paketin məzmunu

Bütün əşyaların paketdə olduğunu yoxlayın:

• Dickson TM320 Data Logger
• Təlimat kitabçası (bu sənəd)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Məhsul bitdiview

Şəkil 4.1: Ön View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Şəkil 4.2: Yan View with Ports. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Şəkil 4.3: Geri View. Displays the battery compartment cover and keyhole slots for wall mounting.

Şəkil 4.4: Üst View. Shows the slot for inserting an SD card for data storage and transfer.

5. Quraşdırma

5.1. Batareyanın quraşdırılması

1. Cihazın arxasındakı batareya bölməsini tapın (Şəkil 4.3-ə baxın).
2. Batareyanın qapağını sürüşdürərək açın.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Batareyanın qapağını etibarlı şəkildə bağlayın.

5.2. İlkin işə salınma

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Cihazın quraşdırılması

The TM320 can be placed on a flat surface or mounted on a wall:

• Səthin yerləşdirilməsi: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Divar montajı: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Əməliyyat

6.1. Displeyin Anlaşılması

The jumbo display provides real-time information:

• Cari oxu: Shows the live temperature or humidity value.
• Vahidlər: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Batareya göstəricisi: Qalan batareyanın ömrünü göstərir.
• CH (Kanal): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Düymə funksiyaları

• MIN/MAX Button: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• ALARM düyməsi: üçün basın view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• SAXLAMA düyməsi: Press to manually save a data point.

6.3. Məlumatların qeydiyyatı

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Siqnalların qurulması

The device features audio/visual alarms for out-of-range conditions.

1. basın və saxlayın ALARM button until the alarm setting mode is activated.
2. istifadə edin MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. istifadə edin SAXLAYIN button to adjust the alarm threshold values.
4. basın ALARM again to confirm and exit the setting mode.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's webproqram təminatı üçün sayt).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Baxım

7.1. Təmizləmə

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Batareyanın dəyişdirilməsi

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. Saxlama

When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Giderme

9. Spesifikasiyalar

10. Zəmanət və Dəstək

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Websayt: www.dicksonlogger.com