1. Giriş
This manual provides essential information for the safe and effective use of your JBC 30ST Soldering Iron. Designed for precision electronic work, this 25W soldering iron features a rapid heating system and is supplied with a durable, heat-resistant R-10D tip.
The JBC 30ST is a versatile tool, ideal for laboratory electronic work and circuit assembly, offering efficient heat utilization and quick temperature recovery.
2. Təhlükəsizlik Məlumatı
Always read and understand all safety warnings and instructions before using this product.
- Elektrik Təhlükəsizliyi: Ensure the soldering iron is connected to a properly grounded power outlet. Do not use with damaged cords or plugs. Disconnect from power when not in use or during maintenance.
- Yanma təhlükəsi: The soldering iron tip and surrounding metal parts reach very high temperatures (up to 380°C). Always use extreme caution to avoid contact with hot surfaces. Allow the iron to cool completely before storing.
- Fume Inhalation: Soldering produces fumes. Work in a well-ventilated area or use a fume extractor to avoid inhaling harmful fumes.
- Gözün qorunması: Always wear safety glasses to protect your eyes from solder splashes or flying debris.
- İş səthi: Use a heat-resistant work surface. Keep flammable materials away from the soldering area.
- Uşaqlar və ev heyvanları: Lehimləmə dəmirini uşaqların və ev heyvanlarının əli çatmayan yerdə saxlayın.
3. Paketin məzmunu
Bütün əşyaların paketinizdə olduğunu yoxlayın:
- 1 x JBC 30ST Soldering Iron
- 1 x R-10D Heat-Resistant Long-Life Tip (pre-installed or separate)
- 1 x Three-conductor power cable
This image displays the retail packaging for the JBC 30ST Soldering Iron. The box features the JBC logo, website (www.jbctools.com), and product descriptions in multiple languages including English ('Pencil Soldering Iron'), Spanish, French, German, and Italian. The soldering iron itself, with its distinctive blue and black handle and silver tip, is visible on the right side of the packaging. The model number '30 ST' and power '230V-25W' are also printed on the side of the tool.
4. Quraşdırma
- Qablaşdırma: Bütün komponentləri qablaşdırmadan diqqətlə çıxarın.
- Tip Installation (if not pre-installed): Ensure the soldering iron is unplugged and cool. Gently insert the R-10D tip into the heating element receptacle until it is seated firmly. Do not force it.
- Enerji bağlantısı: Plug the three-conductor power cable into a compatible 220V grounded electrical outlet.
- Initial Heat-up: Once plugged in, the soldering iron will begin to heat. It takes approximately 2 minutes and 15 seconds to reach 300°C, with a maximum operating temperature of 380°C.
5. Əməliyyat Təlimatları
Effektiv lehimləmə üçün bu addımları izləyin:
- İpucu Qalaylamaq: Before first use and periodically during operation, apply a small amount of solder to the hot tip. This 'tins' the tip, protecting it from oxidation and ensuring efficient heat transfer.
- Ucu təmizləmək: Reklamdan istifadə edinamp sponge or brass wool tip cleaner to wipe off excess solder and oxidation from the tip before and after each use.
- Applying Heat: Place the clean, tinned tip against both the component lead and the solder pad simultaneously.
- Applying Solder: Once the joint is hot enough (typically a few seconds), apply solder to the opposite side of the joint from the iron. The solder should flow smoothly and quickly around the joint. Do not apply solder directly to the iron tip.
- Removing the Iron: Once the solder has flowed, remove the soldering iron first, then the solder. Allow the joint to cool undisturbed.
- Soyudun: When finished, unplug the soldering iron and place it in a safe, heat-resistant stand. Allow it to cool completely before handling or storing.
6. Baxım
Düzgün qulluq lehimləmə dəmirinizin ömrünü uzadır:
- İpucu Təmizləmə: Reklamdan istifadə edərək ucunu müntəzəm olaraq təmizləyinamp sponge or brass wool. For stubborn oxidation, use a tip tinner/cleaner compound. A well-maintained tip will be shiny and accept solder easily.
- Ucun dəyişdirilməsi: Replace the tip when it becomes pitted, corroded, or no longer accepts solder easily, even after cleaning and tinning. Ensure the iron is cool and unplugged before changing tips.
- Handle and Cord: Keep the handle clean and free of solder. Inspect the power cord regularly for any signs of damage (cuts, fraying). If damaged, discontinue use and seek professional repair.
- Yaddaş: Store the soldering iron in a dry, safe place, away from dust and moisture, once it has completely cooled.
7. Giderme
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Lehimləmə dəmiri qızmır. | No power; Faulty heating element. | Check power outlet and cable connection. If still not heating, contact JBC support. |
| Solder does not melt or flow well. | Tip is oxidized or dirty; Insufficient heat transfer. | Clean and re-tin the tip. Ensure the tip is making good contact with the joint. |
| Tip turns black quickly. | Tip is not tinned; Running too hot; Using incorrect solder. | Always tin the tip. Ensure proper soldering technique. Use good quality solder. |
| Solder joints are dull or brittle. | Cold joint (insufficient heat); Movement during cooling. | Ensure components and pads are heated sufficiently. Do not move the joint until solder has solidified. |
8. Spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Model nömrəsi | 3302040 (30ST) |
| İstehsalçı | JBC |
| Güc | 25 Vt |
| Güc mənbəyi | Electric Cable (220V mains) |
| Maksimum Temperatur | 380 °C |
| Time to reach 300 °C | 2 dəqiqə 15 saniyə |
| Çəki (kordonsuz) | 40 qram |
| Weight (with cord) | 120 qram |
| Məhsulun Ölçüləri (U x G x Y) | 30 x 6 x 4.9 sm |
| Dəstək materialı | Neylon |
| Xüsusi Xüsusiyyət | İstiliyə davamlı |
| Daxil olan komponentlər | R-10D heat-resistant long-life tip, three-conductor cable |
9. Zəmanət və Dəstək
For warranty information, technical support, or spare parts availability, please refer to the official JBC website or contact your authorized JBC dealer. Keep your purchase receipt as proof of purchase.
JBC Official Websayt: www.jbctools.com
