1. Giriş və yuxarıview
Thank you for choosing the Proel DM220 Dynamic Microphone. This manual provides essential information for the proper setup, operation, and maintenance of your microphone. The DM220 is a vocal microphone featuring a dynamic capsule and a cardioid polar pattern, designed for clear and extended frequency response, particularly transparent in low-mid frequencies. Its ergonomic barrel design ensures comfortable handling.

Image 1.1: The Proel DM220 Dynamic Microphone, shown with its included carrying pouch and microphone clip.
2. Əsas Xüsusiyyətlər
- Transduser növü: Hərəkət edən bobin dinamikası
- Qütb nümunəsi: Cardioid, designed to pick up sound primarily from the front.
- Tezliyə cavab: 50 Hz - 15 kHz, providing a flat and extended range.
- Həssaslıq: -53 dB ± 3 dB
- Maximum SPL for 0.5% THD: 135 dB
- Siqnal-səs-küy nisbəti: 74 dB
- Nominal Empedans: < 600 ohm
- Tövsiyə olunan Yük Empedansı: 1500 ohm
- Bağlayıcılar: 3-pin male XLR for reliable audio connection.
- Açma/Söndürmə açarı: Integrated switch for convenient control.
- Erqonomik Dizayn: Solid feel and comfortable handling.
3. Quraşdırma Təlimatları
3.1 Mikrofonun qoşulması
- Locate the 3-pin male XLR connector at the base of the microphone.
- Connect a standard XLR cable (not included) to the microphone's connector. Ensure a secure fit.
- Connect the other end of the XLR cable to an appropriate input on your mixer, audio interface, or ampömürlük.

Image 3.1: The base of the Proel DM220 microphone, illustrating the 3-pin male XLR connection port.
3.2 Mikrofonun quraşdırılması
- Attach the included microphone clip to a standard microphone stand (not included).
- Gently insert the Proel DM220 microphone into the clip, ensuring it is held firmly.
- Adjust the microphone stand and clip to the desired height and angle for optimal performance.

Image 3.2: The Proel DM220 microphone securely placed in its accompanying microphone clip.
4. Əməliyyat Təlimatları
4.1 Yandırma/Söndürmə
The Proel DM220 features an integrated on/off switch for convenient control. To activate the microphone, slide the switch to the 'ON' position. To deactivate, slide it to the 'OFF' position. Always ensure the microphone is off when not in use to prevent accidental sound capture or feedback.
4.2 Mikrofonun Yerləşdirilməsi
Due to its cardioid polar pattern, the DM220 is most sensitive to sounds directly in front of it and rejects sounds from the sides and rear. For optimal vocal performance, position the microphone directly in front of the sound source (e.g., singer's mouth) at a distance of 2-6 inches (5-15 cm). Experiment with distance to achieve the desired tone and to minimize plosive sounds (P, B sounds).
5. Baxım
5.1 Təmizləmə
- Mikrofonun gövdəsini yumşaq, quru parça ilə silin.
- For the grille, use a slightly damp cloth to remove any residue, then dry thoroughly. Do not allow moisture to enter the microphone capsule.
- Sərt kimyəvi maddələrdən, həlledicilərdən və ya aşındırıcı təmizləyicilərdən istifadə etməkdən çəkinin.
5.2 Saxlama
When not in use, store the microphone in its protective carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures. This helps protect the microphone from dust, moisture, and physical damage.
6. Giderme
- Səs Çıxışı yoxdur:
- Ensure the microphone's on/off switch is in the 'ON' position.
- Check all XLR cable connections at both the microphone and the audio input device.
- Verify that the input channel on your mixer or interface is selected and its gain/volume is turned up.
- Kabel nasazlığını istisna etmək üçün fərqli XLR kabeli ilə sınaqdan keçirin.
- Test the microphone on a different input channel or device if possible.
- Aşağı və ya təhrif edilmiş səs:
- Adjust the gain level on your mixer or audio interface. Too low gain results in weak sound, too high can cause distortion.
- Mikrofonun səs mənbəyinə nisbətən düzgün yerləşdirildiyinə əmin olun.
- Check for any obstructions on the microphone grille.
- Feedback (High-pitched squealing):
- Reposition the microphone further away from speakers or monitors.
- Reduce the overall volume or the gain of the microphone channel.
- Ensure speakers are not pointing directly at the microphone.
7. Spesifikasiyalar
| Spesifikasiya | Dəyər |
|---|---|
| Brend | PROEL |
| Model Adı | DM220 |
| Transduser növü | Hərəkətli Bobin Dinamik |
| Qütb nümunəsi | Kardioid (bir istiqamətli) |
| Tezliyə cavab | 50 Hz - 15 kHz |
| Həssaslıq | -53 dB |
| Siqnal-to-küy nisbəti | 74 dB |
| Nominal Empedans | < 600 ohm |
| Tövsiyə olunan Yük Empedansı | 1500 ohm |
| Bağlayıcılar | 3 pinli Kişi XLR |
| Xüsusi Xüsusiyyət | On/Off Switch, Wired |
| Güc mənbəyi | Kabel Elektrik |
| Element Ölçüləri (U x G x Y) | 18 x 5.3 x 5.3 sm |
| Maddə Çəkisi | 300 qram |
| Tövsiyə olunan istifadələr | Vocal (Chant) |
| Uyğun Cihazlar | Ampömürlük |
8. Zəmanət və Dəstək
Specific warranty information for the Proel DM220 Dynamic Microphone is not provided in the available product details. For warranty claims or technical support, please contact your retailer or the official Proel customer service directly. Keep your purchase receipt as proof of purchase.





