Airflow iCon ECO 15 Çıxarış Ventilyatoru İstifadəçi Təlimatı

1. Giriş

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Airflow iCon ECO 15 Extractor Fan. Please read these instructions thoroughly before installation and retain them for future reference. The Airflow iCon ECO 15 is a stylish, compact, low-profile fan designed for discreet ventilation in various domestic applications.

2. Təhlükəsizlik Məlumatı

Əhəmiyyətli Təhlükəsizlik Təlimatları:

Ensure the power supply is disconnected before installation, maintenance, or servicing.
Quraşdırma, milli naqil qaydalarına və yerli tikinti normalarına uyğun olaraq ixtisaslı elektrikçi tərəfindən aparılmalıdır.
Bu cihaz fiziki, duyğu və ya əqli imkanları zəif olan və ya təcrübəsi və biliyi olmayan şəxslərin (uşaqlar da daxil olmaqla) istifadəsi üçün nəzərdə tutulmayıb, əgər onların təhlükəsizliyinə cavabdeh olan şəxs tərəfindən nəzarət və ya cihazın istifadəsi ilə bağlı təlimat verilməyibsə.
Uşaqların cihazla oynamamasını təmin etmək üçün onlara nəzarət edilməlidir.
Do not install the fan directly above a shower or bath unless it is protected by a suitable enclosure.
Ensure that the air intake and exhaust vents are not obstructed.
The fan must not be connected to a chimney flue or any other appliance flue.

3. Məhsul bitdiview

The Airflow iCon ECO 15 is a 100mm (4-inch) axial extractor fan featuring an intelligent iris shutter design for efficient and quiet operation. Its low-profile aesthetic integrates seamlessly into modern interiors.

3.1 Əsas Xüsusiyyətlər

Iris Shutter Technology: Intelligent, award-winning design with a delayed shutter that opens and closes over up to 2 minutes. This avoids unnecessary operation for energy efficiency and prevents unwanted backdraughts.
Aşağı Profile Dizayn: Discreet and aesthetically pleasing.
Modular Versatility: Compatible with various control modules (sold separately) for enhanced functionality.
Sakit əməliyyat: Designed for low noise levels.

Airflow iCon ECO 15 Extractor Fan, front view with closed iris shutter — Ön view of the Airflow iCon ECO 15 Extractor Fan with its iris shutter closed, showing a smooth, unobtrusive appearance.

Airflow iCon ECO 15 Extractor Fan, front view with partially open iris shutter — Ön view of the Airflow iCon ECO 15 Extractor Fan with the iris shutter partially open, revealing the internal grille.

Airflow iCon ECO 15 Extractor Fan, front view with fully open iris shutter — Ön view of the Airflow iCon ECO 15 Extractor Fan with the iris shutter fully open, showing maximum airflow capacity.

Diagram illustrating iCON Iris Shutter Technology features — This image details the iCON Iris Shutter Technology, highlighting its intelligent design, delayed opening/closing for energy efficiency, and automatic closure to prevent backdraughts. Three fan states (closed, partially open, fully open) are shown.

4. Spesifikasiyalar

Technical Data for Airflow iCon ECO 15
Spesifikasiya	Dəyər
Brend	Hava axını
Model nömrəsi	iCON ECO 15
Fan növü	Eksenel
Air Flow (m³/h / l/s)	69 / 19
Montaj Vəzifəsi	Divar / Tavan
Sound Pressure @ 3m (dB(A))	28.8
Güc (W)	9.4
Duct Diameter (mm)	100
Təchizat həcmitage	230 V / 1ph / 50 Hz
Girişdən qorunma reytinqi	IPX4
Maksimum Mühit Temperaturu (°C)	40
Çəki (kq)	0.74
Ölçülər H x G x D (mm)	197 x 197 x 108.5

Technical data table for Airflow iCon 15 — Detailed technical specifications for the iCon 15 fan, including airflow, power, noise level, and dimensions.

Dimensions diagram and static pressure performance graph for Airflow iCon 15 — This image provides a dimensional drawing of the iCon 15 fan with key measurements (A, B, C, D, E) and a static pressure vs. airflow performance graph.

Energy label for Airflow iCon 15 — The energy label for the Airflow iCon 15, indicating a 'C' energy efficiency rating, 29 dB noise level, and 68 m³/h airflow.

5. Quraşdırma

The Airflow iCon ECO 15 fan is designed for installation in walls or ceilings. Always ensure the power supply is isolated before commencing any installation work.

5.1 Ümumi Quraşdırma Təlimatları

The fan requires a 110mm diameter hole for installation.
For wall installations, the hole should be lined with a 100mm internal diameter duct.
When using flexible ducting, ensure the diameter is maintained throughout the run.
Ensure all vapor barriers are properly restored after installation.

5.2 Wall Installation (Recessing Fan)

The iCon 15 requires a 110mm diameter hole through the wall. This hole should be lined with a 100mm internal diameter duct.

5.3 Ceiling Installation (Recess)

The fan should be fitted in the hole, secured with the screws provided into the support structure. The iCon 15 requires a 110mm diameter hole through the ceiling.

5.4 Ceiling Installation (Surface Mounting)

When surface mounting, the fan is fitted into the mounting skirt (if supplied). The iCon 15 requires a 110mm diameter hole through the ceiling. When recessing or surface mounting in the ceiling, a plywood support (min. 18mm thick) must be mounted between the ceiling joists. Any fixing screws should be fitted through the plasterboard into this support.

Installation diagrams for wall and ceiling mounting of iCon fans — This image displays various installation methods: wall recessing, ceiling recessing, and ceiling surface mounting, with diagrams illustrating ducting and support requirements for iCon 15, 30, and 60 models.

Yan view of Airflow iCon ECO 15 with ducting — Yan profile of the Airflow iCon ECO 15 fan, showing the integrated duct connection for ventilation systems.

6. Əməliyyat Təlimatları

The Airflow iCon ECO 15 operates automatically based on its intelligent iris shutter technology. When activated (e.g., by a light switch or an optional control module), the iris shutter will slowly open, and the fan will begin to extract air. Upon deactivation, the fan will continue to run for a set period (if a timer module is installed) before the shutter slowly closes, preventing backdraughts.

6.1 Control Modules (Sold Separately)

The iCon ECO 15 is designed to be upgraded with various 'snap-in' interchangeable control modules to suit specific ventilation needs. These modules offer functionalities such as:

Basic Switching: Simple on/off operation.
Gecikmə Başlama: Fan starts after a delay.
Rütubət Sensoru: Activates based on room humidity levels.
Hərəkət Sensoru: Activates upon detecting movement.
Pullcord: Manual activation via a pull cord.
Room Refresh: Periodic ventilation.
SELV: Safety Extra Low Voltage.
Taymer: Fan runs for a set duration after activation.
Two Speed: Allows selection between two fan speeds.
Dəyişən sürət: Tənzimlənən fan sürəti.

Refer to the specific control module's instructions for detailed operating procedures.

Diagram showing various smart control modules for Airflow iCon fans — This image illustrates the modular design of the iCon fan, showing how different 'snap-in' control modules (e.g., Basic, Delay Start, Humidity, Motion Sensor, Timer) can be added to upgrade its functionality. An exploded view of the fan's internal components is also visible.

7. Baxım

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Airflow iCon ECO 15 Extractor Fan.

Gücü ayırın: Always ensure the power supply to the fan is disconnected before performing any maintenance.
Qapağın təmizlənməsi: The front cover can be gently wiped with a damp parça və yumşaq yuyucu vasitə. Aşındırıcı təmizləyicilərdən çəkinin.
Cleaning the Fan Blades: Carefully remove the front cover (refer to installation instructions for removal). Gently clean the fan blades and internal surfaces with a soft brush or damp cloth. Ensure no moisture enters electrical components.
Yenidən montaj: Once clean and dry, reassemble the fan cover, ensuring it is securely fitted.
Tezlik: Cleaning should be performed periodically, depending on the environment and usage, typically every 3-6 months.

8. Giderme

If you experience issues with your Airflow iCon ECO 15 fan, consult the following common troubleshooting steps:

Problem	Mümkün Səbəb	Həll
Fan işləmir.	No power supply; faulty wiring; fan motor failure; control module issue.	Check power supply at the switch and fuse box. Verify wiring connections (by a qualified electrician). If using a control module, check its functionality.
Fan səs-küylüdür.	Obstruction in ducting or fan blades; loose mounting; worn bearings.	Disconnect power and inspect fan blades and ducting for obstructions. Ensure the fan is securely mounted. If noise persists, professional inspection may be required.
Zəif çıxarma performansı.	Blocked ducting; dirty fan blades; incorrect fan size for room.	Clean fan blades and check ducting for blockages. Ensure ducting is correctly installed and not excessively long or restrictive.
Iris shutter not opening/closing.	Obstruction; motor fault; control module issue.	Disconnect power and check for any physical obstructions around the shutter mechanism. If using a control module, verify its operation.

For issues not listed here or if solutions do not resolve the problem, please contact Airflow customer support or a qualified technician.

9. Zəmanət Məlumatı

Airflow Developments Ltd guarantees the iCon fan for 3 il from the date of purchase against faulty material or workmanship. This warranty is applicable to units installed and used in the United Kingdom.

You can register your warranty online for more information at www.airflow.com.

The warranty covers only the fan and does not include reinstallation if required. In the event of any defective parts being found, Airflow Developments Ltd reserves the right to repair or replace the unit at their discretion without charge, provided that:

It has been installed and used in accordance with the fitting and wiring instructions supplied with each unit.
It has not been connected to an unsuitable electrical supply.
It has not been subjected to misuse, neglect, or damage.
It has not been modified or repaired by any person not authorized by Airflow Developments Ltd.
It has been installed in accordance with the latest Building Regulations and IET wiring regulations by a person who is recognized as a competent installer (e.g., NICEIC Ventilation Scheme).

Airflow Developments Ltd shall not be liable for any loss, injury, or other consequential damage arising from a failure of the equipment, except only that nothing in this condition shall be construed as to exclude or restrict liability for negligence.

This warranty does not affect any statutory or other consumer rights.

For detailed standard warranty terms and conditions, please visit the Airflow websayt və ya Müştəri Xidmətləri ilə əlaqə saxlayın.

Airflow product warranty information and contact details — This image provides the warranty statement from Airflow Developments Ltd, outlining the 3-year guarantee, conditions for validity, and limitations of liability. It also includes disposal information and contact details for various regions.

10. Dəstək və Əlaqə

For further assistance, frequently asked questions (FAQs), and installation help, please visit the Airflow Knowledge Base:

airflow.com/useful-links/knowledge-base-faqs