SatLink WS-6909 DVB-S/DVB-T Combo Satellite Signal Finder Meter User Manual

1. Giriş

The SatLink WS-6909 is a versatile digital meter designed for aligning both DVB-S (satellite) and DVB-T (terrestrial) signals. Featuring a 3.5-inch high-definition TFT LCD screen, it allows users to view actual channels directly on the device, ensuring quick and accurate signal alignment. The meter includes a unique calibration system for optimal performance and supports various satellite and terrestrial signal parameters.

Qeyd: DVB-T functionality may not be supported in all regions, including America.

2. Paketin məzmunu

Zəhmət olmasa, aşağıda sadalanan bütün əşyaların paketinizə daxil olduğunu yoxlayın:

• 1 x SatLink WS-6909 Satellite Meter
• 1 x Enerji Adapteri
• 1 x AV Kablosu
• 1 x Avtomobil Şarj Kabeli
• 1 x Silikon qutu

3. Məhsul bitdiview

Familiarize yourself with the components and ports of your SatLink WS-6909 meter.

Şəkil 3.1: Ön view of the SatLink WS-6909 meter, showing the 3.5-inch LCD screen, control buttons, and numeric keypad, alongside its protective orange silicone case.

Şəkil 3.2: Aşağı view of the device, featuring the main power switch, DC power input port, and a USB port for software upgrades.

Şəkil 3.3: Yan view of the meter, illustrating the AV IN and AV OUT ports for connecting external video sources or displays.

Şəkil 3.4: Üst view of the device, displaying the F-connector for satellite input and the standard antenna input for terrestrial signals.

4. Quraşdırma

4.1 Cihazın doldurulması

1. Connect the provided Power Adaptor to the DC input port on the bottom of the meter.
2. Plug the Power Adaptor into a standard electrical outlet. The 'Charge' indicator light on the device will illuminate.
3. Allow the device to charge fully before initial use. A full charge provides approximately 4 hours of operating time.
4. Alternatively, use the Car Charger Cable to charge the device in a vehicle.

4.2 İlkin işə salınma

1. Cihazın kifayət qədər doldurulduğundan əmin olun.
2. Flip the main power switch located on the bottom of the meter to the 'ON' position.
3. The device will power on and perform an automatic calibration for optimal performance.

4.3 Connecting Antennas/LNBs

• For satellite signal reception (DVB-S), connect the LNB cable from your satellite dish to the F-connector input on the top of the meter.
• For terrestrial signal reception (DVB-T), connect your terrestrial antenna cable to the standard antenna input on the top of the meter.

5. Əməliyyat Təlimatları

5.1 Əsas naviqasiya

• istifadə edin MENU əsas menyuya daxil olmaq üçün düymə.
• Navigate through menu options using the directional arrow buttons (YUKARI/AŞAĞI/SOL/SAĞ).
• düyməsini basın OK button to confirm selections or enter sub-menus.
• istifadə edin EXIT button to return to the previous screen or exit the menu.
• The numeric keypad can be used for direct input of values such as frequencies or channel numbers.

5.2 DVB-S (Satellite) Signal Finding

1. From the main menu, select the DVB-S measurement mode.
2. Configure parameters such as satellite, transponder frequency, symbol rate, and polarity. These settings can be modified by the user.
3. The meter supports DISEQC 1.0, 1.1, 1.2, and 22kHz Tone. Adjust these settings as required for your LNB configuration.
4. The meter provides LNB power supply options of 18V/13V (maximum 400mA).
5. Align your satellite dish while observing the signal strength, quality, BER (Bit Error Rate), S/N (Signal-to-Noise ratio), and PWR (Power) on the 3.5-inch LCD screen.
6. The device will provide a sound and light alarm when a signal is locked.
7. The meter can automatically calculate Azimuth (AZ) and Elevation (EL) angles to assist with dish alignment.
8. Search modes include Auto, Blind, and Manual.

5.3 DVB-T (Terrestrial) Signal Finding

1. From the main menu, select the DVB-T measurement mode.
2. Configure the desired frequency range.
3. The meter supports ANT power supply options of 5V/12V/24V for active antennas.
4. Align your terrestrial antenna while observing the signal strength, quality, MER (Modulation Error Ratio), S/N (Signal-to-Noise ratio), and PWR (Power) on the LCD screen.
5. The meter supports multichannel checks and demodulation types including QPSK, 16QAM, and 64QAM.
6. Search modes include Auto and Manual.

5.4 Proqram Təminatının Yenilənməsi

The USB port on the bottom of the device is used for software upgrades. Refer to the manufacturer's website for the latest software and instructions.

6. Baxım

6.1 Təmizləmə

• Wipe the device exterior with a soft, dry cloth.
• Do not use liquid cleaners or solvents, as they may damage the device.

6.2 Batareya Baxımı

• Batareyanın ömrünü uzatmaq üçün cihazı həddindən artıq temperaturlara məruz qoymayın.
• Recharge the battery regularly, even if the device is not in frequent use.

6.3 Proqram Yeniləmələri

Periodically check the manufacturer's official website for available software updates. Updating the firmware can improve performance and add new features.

7. Giderme

8. Spesifikasiyalar

• Ekran: 3.5 İnç yüksək tərifli LCD ekran
• Batareya: 8.4V/3000mAh Li-ion, Max Operating Time: 4 hours
• DVB-S Input Frequency: 950-2150 MHz
• DVB-S Input Level: -65 ilə -25dBm arasında
• DVB-S Input Impedance: 75Ω
• DISEQC Support: 1.0, 1.1, 1.2 and 22kHz Tone
• LNB Power Supply: 18V/13V (IMax 400mA)
• DVB-T Frequency Range: 46MHz-862MHz
• DVB-T Level Range: 40dBµV-110dBµV
• DVB-T Input Impedance: 75Ω
• DVB-T Demodulation: QPSK, 16QAM, 64QAM
• ANT Power Supply: 5V/12V/24V
• Ölçmə növləri: Signal strength, quality, BER, S/N, PWR (DVB-S); Signal strength, quality, MER, S/N, PWR (DVB-T)
• Axtarış rejimləri: Auto, Blind, Manual
• Məhsul Ölçüləri: 3.54 x 1.77 x 6.46 düym
• Maddə çəkisi: 1.76 funt sterlinq
• Model nömrəsi: WS 6909

9. Zəmanət və Dəstək

For technical assistance, warranty information, or customer support, please contact your original retailer or refer to the manufacturer's official website for contact details. Please have your product model number (WS 6909) and purchase information ready when seeking support.