HID RK40

HID RK40 iCLASS SE Smart Card Reader with Keypad User Manual

Model: RK40

1. Giriş

The HID RK40 iCLASS SE Smart Card Reader with Keypad is a versatile access control device designed for secure identification. It supports 13.56 MHz contactless smart card technology and offers dual authentication options: contactless card presentation combined with a Personal Identification Number (PIN), or single-factor authentication using either a card or a PIN. The keypad features a durable, weatherproof design with tactile response and backlit numbering, suitable for various environmental conditions.

2. Təhlükəsizlik Məlumatı

3. Paketin məzmunu

Bütün əşyaların paketdə olduğunu yoxlayın:

4. Məhsul bitdiview

The image below illustrates the front and rear views of the HID RK40 reader, highlighting its keypad and wiring connections.

Ön və arxa view of the HID RK40 iCLASS SE Smart Card Reader with Keypad. The front shows a 12-button numeric keypad with '*' and '#' keys. The rear shows the wiring harness and product label with model information.

This image displays both the front and back of the HID RK40 reader. The front features a black housing with a numeric keypad (0-9, *, #) and the HID logo. The back reveals the product label, indicating 'iCLASS SE RK40', and a multi-colored wiring harness for connection to an access control panel.

The front panel includes a 12-position keypad for PIN entry and an integrated smart card reader. The rear panel contains the wiring connections for power, data, and control signals.

5. Quraşdırma

5.1 Quraşdırma

  1. Select a suitable mounting location, ensuring it is flat and secure.
  2. Use the provided mounting template (if applicable) to mark drilling points.
  3. Montaj vintləri üçün pilot delikləri qazın.
  4. Route the wiring through the wall or mounting surface.
  5. Secure the reader to the mounting surface using the provided screws. Do not overtighten.

5.2 Məftillər

Connect the reader to the access control panel according to the panel's specifications and the wiring diagram below. Ensure all connections are secure and insulated.

Naqil Bağlantıları
Tel RəngiFunksiyaTəsvir
QırmızıGüc (+)Connect to +5VDC to +16VDC power supply.
QaraYer (-)Connect to power supply ground.
YaşılData 0 (Wiegand)Wiegand Data 0 output.
Data 1 (Wiegand)Wiegand Data 1 output.
QəhvəyiLED NəzarətControls the reader's LED indicator.
NarıncıSiqnal NəzarətiControls the reader's audible beeper.
SarıTutunInput for holding card data.
MaviOSDP Data (RS-485)OSDP communication line.
BənövşəOSDP Data (RS-485)OSDP communication line.

Note: Specific wiring configurations may vary based on the access control system. Refer to your system's documentation for detailed instructions.

6. Əməliyyat Təlimatları

6.1 Card Presentation

To gain access using a smart card:

  1. Present your iCLASS SE smart card within close proximity to the reader's front surface.
  2. The reader will emit an audible beep and/or illuminate an LED to indicate a successful read.
  3. If configured for card-only access, the access control system will grant or deny access based on the card's credentials.

6.2 PIN Entry (Keypad)

For systems requiring PIN entry (either standalone or combined with a card):

  1. If required, present your smart card first (refer to 6.1).
  2. Enter your Personal Identification Number (PIN) using the numeric keypad.
  3. Press the '#' key (or as configured by your system) to confirm the PIN entry.
  4. The reader will provide feedback (beep/LED) indicating acceptance or rejection of the PIN.

7. Baxım

8. Giderme

Ümumi məsələlər və həllər
ProblemMümkün SəbəbHəll
Oxucu işə düşmür.Elektrik təchizatı yoxdur; səhv naqillər.Güc bağlantılarını yoxlayın və düzgün həcmdən əmin oluntage. Bölmə 5.2-yə uyğun olaraq naqilləri yoxlayın.
Card not read.Card not compatible; card damaged; incorrect presentation.Ensure card is iCLASS SE compatible. Try another card. Present card closer to the reader.
PIN entry not accepted.Incorrect PIN; system not configured for PIN.Verify the correct PIN. Consult your system administrator to confirm PIN configuration.
No LED or audible feedback.LED/Beeper control wiring issue; disabled in system.Check Brown and Orange wire connections. Consult system administrator for configuration.

Problemlər davam edərsə, texniki dəstək ilə əlaqə saxlayın.

9. Spesifikasiyalar

10. Zəmanət Məlumatı

HID Global Corporation warrants its products against defects in materials and workmanship under normal use and service for a specified period from the date of purchase. For detailed warranty terms and conditions, please refer to the official HID Global website or contact your authorized distributor. This warranty does not cover damage caused by improper installation, misuse, unauthorized modification, or acts of nature.

11. Texniki Dəstək

For technical assistance, troubleshooting, or further information regarding the HID RK40 iCLASS SE Smart Card Reader with Keypad, please contact HID Global Technical Support or your local authorized HID Global partner. Support resources, including FAQs and documentation, may also be available on the official HID Global websayt.

Əlaqədar Sənədlər - RK40

Preview HID Reader Manager Tətbiq İstifadəçi Təlimatı (iOS) - Girişə Nəzarət Oxuyanlarını idarə edin
iOS üçün HID Reader Manager Tətbiq İstifadəçi Təlimatını araşdırın. HID Signo və iCLASS SE oxuyucularını quraşdırmaq, konfiqurasiya etmək və idarə etmək, proqram təminatını təkmilləşdirmək və təkmil giriş nəzarəti təhlükəsizliyi üçün ümumi problemləri həll etmək yollarını öyrənin.
Preview HID Reader Manager Solution: Android User Guide for Access Control
Comprehensive user guide for HID Reader Manager solution on Android. Learn to install, configure, and manage HID access control readers, firmware, and mobile app features.
Preview HID iCLASS SE R90 Quraşdırma Təlimatı
Bu quraşdırma təlimatı, HID iCLASS SE R90 təmassız oxuyucusu üçün ətraflı təlimatlar, o cümlədən hissələrin siyahısı, texniki xüsusiyyətlər, naqillərin diaqramları, montaj prosedurları və giriş nəzarəti sistemləri üçün əlavə xüsusiyyətlər təqdim edir.
Preview HID Signo Oxucular Bələdçisi: Hissə Nömrələrini Anlamaq
Stil, klaviatura seçimləri və texnologiya uyğunluğu üçün müxtəlif kodların mənasını izah edən HID Signo oxuyucu hissələrinin nömrələrini anlamaq üçün bələdçi.
Preview HID iCLASS SE Express R10 Reader Installation Guide
This document provides a comprehensive guide for the installation of the HID iCLASS SE Express R10 Reader, covering supplied parts, specifications, installation steps, and optional features.
Preview HID EntryProx™ Oxucu: Tək Qapılı Yaxınlıq Giriş Nəzarəti Məlumat Cədvəli
Detailed datasheet for the HID EntryProx™ Reader, a stand-alone single-door proximity access control device. Features include keypad entry, remote monitoring, fast programming, and robust design for various environments. Specifications, model numbers, and compatibility information provided by HID Global.