Bogen BG-NR100

BOGEN BG-NR100 Night Ringer Instruction Manual

Model: BG-NR100 | Brand: Bogen

1. Giriş

1.1 Məhsul Bitdiview

Bogen BG-NR100 Night Ringer device with connection terminals
The Bogen BG-NR100 Night Ringer is a compact device designed to provide an audible ring signal for paging systems. It responds to standard 90V telephone ring signals or external contact closures, producing a distinct dual-frequency electronic ringer tone. This unit is ideal for environments where telephone ring signals need to be amplified or integrated into a public address system, automatically muting background music during a ring event.

The Bogen BG-NR100 Night Ringer is an essential component for integrating telephone ringing into a paging or public address system. It is engineered to detect incoming telephone ring signals or external contact closures and generate a loud, clear electronic ringer tone. Its compact design and low current draw make it an efficient and reliable solution for various commercial and industrial applications.

1.2 Əsas Xüsusiyyətlər

2. Təhlükəsizlik Məlumatı

Please read all safety instructions carefully before installing or operating the Bogen BG-NR100 Night Ringer. Failure to follow these instructions may result in electric shock, fire, or other hazards.

2.1 Ümumi təhlükəsizlik tədbirləri

2.2 Elektrik təhlükəsizliyi

3. Quraşdırma

3.1 Qabın açılması

Carefully remove the Night Ringer from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your supplier immediately.

3.2 Quraşdırma

The BG-NR100 is designed for surface mounting. Use appropriate screws (not supplied) to secure the unit to a wall or other stable surface using the mounting tabs on either side of the enclosure. Ensure the mounting location allows for adequate ventilation and access to connections.

3.3 Naqil birləşmələri

All connections are made via the screw terminal block located on the front of the unit. Ensure power is disconnected before making any wiring connections.

Terminal etiketiTəsvirFunksiya
TEL RING (T, R)Telephone Ring InputConnect to the tip (T) and ring (R) lines of a standard 90V telephone ring signal source.
CONTACT RING (A, B)External Contact Closure InputConnect to a dry contact closure (e.g., from a relay or switch) to trigger the ringer.
POWER SUPPLY (+24, -24)Güc GirişiConnect to a regulated 24V DC power supply. Observe polarity (+24V to +24, -24V to -24).
BGM SOURCE (A, B)Fon Musiqi DaxiletməConnect the background music source here. The unit will mute this input during a ring event.
AMP INPUT (A, B)Amplifier Input / Output to Paging SystemConnect this output to the input of your paging amplifier or public address system. This carries the ringer tone and the muted BGM.

4. işlək

4.1 Əsas əməliyyat

Once properly connected and powered, the BG-NR100 will automatically detect an incoming 90V telephone ring signal or a closure on the Contact Ring terminals. Upon detection, the unit will generate a dual-frequency electronic ringer tone and simultaneously mute any background music connected to the BGM Source input. The ringer tone will be sent to the Amp Input terminals for connection to your paging system.

4.2 Səs səviyyəsinə nəzarət

The ringer volume can be adjusted using the TONE VOL knob located on the top left of the unit. Rotate the knob clockwise to increase the volume and counter-clockwise to decrease it. Adjust the volume to a suitable level for your environment.

5. Baxım

5.1 Təmizləmə

To clean the unit, wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosol cleaners. Ensure the unit is powered off and disconnected from all sources before cleaning.

5.2 Ümumi qulluq

The BG-NR100 is designed for reliable operation and requires minimal maintenance. Ensure it is installed in a location free from excessive dust, moisture, and extreme temperatures. Periodically check all wiring connections to ensure they are secure.

6. Giderme

If you experience issues with your Bogen BG-NR100 Night Ringer, refer to the following table for common problems and solutions.

ProblemMümkün SəbəbHəll
No ringer tone output.Cihaza güc yoxdur.Check power supply connections and ensure 24V DC is present.
Incorrect or no input signal (TEL RING or CONTACT RING).Verify 90V ring signal on TEL RING or proper contact closure on CONTACT RING.
Səs düyməsi çox aşağı təyin edilib.Adjust the TONE VOL knob clockwise.
Ringer tone is distorted or weak.Improper connection to paging ampömürlük.təmin etmək AMP INPUT is correctly connected to the amplifier input. Check ampqaldırıcı parametrlər.
Background music does not mute.BGM SOURCE not connected correctly.Verify BGM SOURCE connections. Ensure the music source is routed through the Night Ringer.

If the problem persists after attempting these solutions, please contact Bogen technical support or a qualified service technician.

7. Spesifikasiyalar

Technical specifications for the Bogen BG-NR100 Night Ringer:

AtributDəyər
İstehsalçıBOGEN
BrendBogen
Model nömrəsiBG-NR100
Maddə Çəkisi1 funt
Məhsul Ölçüləri1 x 5 x 3 düym
FCC Registration NumberCD23CH-17566-KX-N
Zəng Ekvivalenti1.1 B
İlk Əlçatan Tarix27 noyabr 2013-ci il

8. Zəmanət və Dəstək

8.1 Zəmanət Məlumatı

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Bogen website. Bogen Communications, Inc. typically provides a limited warranty against defects in materials and workmanship for a specified period from the date of purchase.

8.2 Texniki Dəstək

If you require technical assistance or have questions regarding the installation or operation of your BG-NR100 Night Ringer, please contact Bogen technical support. Contact information can usually be found on the Bogen websaytda və ya məhsulun qablaşdırmasında.

Əlaqədar Sənədlər - BG-NR100

Preview Bogen NQ-E7010 Nyquist Giriş/Çıxış Nəzarətçisi Konfiqurasiya Bələdçisi
Bu təlimat Bogen NQ-E7010 Nyquist Giriş/Çıxış Nəzarətçisini konfiqurasiya etmək üçün ətraflı təlimatlar təqdim edir. Bogen Rəqəmsal Sertifikatlaşdırma Təşkilatı ilə şəbəkə parametrlərini idarə etməyi, proqram təminatını yeniləməyi, qeydlərə daxil olmağı və təhlükəsiz girişi təmin etməyi öyrənin.
Preview Bogen MCP35A Master İdarəetmə Paneli: Quraşdırma və İstifadə Təlimatı
Bu təlimatda Bogen MCP35A Master İdarəetmə Paneli, ikitərəfli rabitə və müxtəlif mühitlərdə proqram paylanması üçün çox yönlü sistem üçün ətraflı quraşdırma, istismar və texniki spesifikasiyalar təqdim olunur.
Preview Bogen ACD2X2 AmpDrop-In Tavan Dinamikinin Quraşdırılması Təlimatı və Zəmanət
Bogen ACD2X2 üçün quraşdırma təlimatları, əlaqə detalları və zəmanət məlumatı ampqaldırılmış tavan dinamiki. Elektrik birləşmələrini, 2x2 və 2x4 plitələr üçün tavan montajını və məhsulun xüsusiyyətlərini əhatə edir.
Preview Bogen Nyquist VoIP İnterkom Modulu Konfiqurasiya Bələdçisi (NQ-GA10P, NQ-GA10PV)
Bogen-in Nyquist NQ-GA10P və NQ-GA10PV VoIP İnterkom Modulları üçün ətraflı konfiqurasiya təlimatı. Quraşdırma, şəbəkə parametrləri, proqram təminatı yeniləmələri və IP səhifələmə və audio paylama sistemləri üçün müstəqil əməliyyatları əhatə edir.
Preview Bogen AS1, ASUG1(DK), ASWG1(DK) Ampliified Tavan Dinamikinin Quraşdırılması və İstifadə Təlimatı
Bogen-in AS1, ASUG1(DK) və ASWG1(DK) özü üçün quraşdırma və istifadə təlimatıampqaldırılmış 8 düymlük konus tipli tavan dinamikləri. Məhsul təsvirini, TB8 və RE84 korpusları üçün quraşdırma təlimatlarını, elektrik birləşmələrini, tənzimləmələri və məhdud zəmanət məlumatlarını əhatə edir.
Preview Bogen NQ-GA20P2 Nyquist İnteqrasiya Gücü Ampliifier konfiqurasiya təlimatı
Bogen NQ-GA20P2 Nyquist 20 vatt inteqrasiya edilmiş güc üçün konfiqurasiya təlimatı ampliifier, quraşdırma, şəbəkə parametrləri, proqram təminatı yeniləmələri və DSP parametrlərinin tənzimlənməsini əhatə edir.