1. Məhsul bitdiview
The Metabo HWW 4000/25 G is a domestic water pump system designed for automatic water supply, garden irrigation, groundwater pumping, and the transfer, pumping, and circulation of clear water from pressure tanks. It features an energy-efficient and low-noise operation, equipped with a pressure switch on the boiler for automatic activation to meet higher water demands. The system includes a maintenance-free capacitor motor and overload protection to prevent overheating. A high-quality mechanical sealing system ensures a long service life. For user convenience, it has a separate water filling opening for easy pump startup and a tool-free water drain plug to protect against frost damage. This system is suitable for garden irrigation with 1 to 3 sprinklers and operates on single-phase power.
2. Təhlükəsizlik Təlimatları
Always read and understand all safety warnings and instructions before operating this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Enerji təchizatının səslə uyğun olduğundan əmin oluntage specified on the pump's rating plate.
- Pompanı zədələnmiş kabellər və ya tıxaclarla işlətməyin.
- Protect the pump from frost. Drain water completely if storing in freezing temperatures.
- Tezalışan, partlayıcı və ya aşındırıcı mayeləri vurmayın.
- Uşaqları və icazəsiz şəxsləri əməliyyat zonasından uzaq tutun.
- Hər hansı təmir və ya təmizlik etməzdən əvvəl həmişə enerji təchizatını ayırın.
3. Quraşdırma
3.1 Qabın açılması
Bütün komponentləri qablaşdırmadan diqqətlə çıxarın. Tranzit zamanı baş verə biləcək hər hansı bir zədə olub olmadığını yoxlayın. Gələcək saxlama və ya daşınma üçün qablaşdırmanı saxlayın.
3.2 Yerləşdirmə
Place the pump on a firm, level surface in a dry, well-ventilated area, protected from direct sunlight and frost. Ensure sufficient space around the pump for ventilation and maintenance.
3.3 Elektrik bağlantısı
Connect the pump to a properly grounded electrical outlet. Ensure the electrical circuit is protected by a residual current device (RCD) with a tripping current of no more than 30 mA.
3.4 Su birləşmələri
Connect the suction line to the pump's inlet and the pressure line to the outlet. Use appropriate fittings and sealants to ensure watertight connections. For optimal performance, the suction line should be as short and straight as possible, and its diameter should not be smaller than the pump's inlet diameter. Install a non-return valve on the suction line to prevent water from flowing back.
3.5 Pompanın doldurulması
Before initial start-up, the pump must be completely filled with water through the separate water filling opening until no more air escapes. This ensures proper suction and prevents dry running. Close the filling opening securely after priming.
4. Əməliyyat Təlimatları
4.1 İlkin işə salınma
After priming the pump and ensuring all connections are secure, plug the pump into the electrical outlet. The pump will start automatically when water is drawn and the pressure in the system drops below the set activation pressure.
4.2 Avtomatik İşləmə
The integrated pressure switch monitors the system pressure. When water is consumed (e.g., opening a tap), the pressure drops, and the pump automatically switches on. Once the water consumption stops and the system pressure reaches the maximum set value, the pump switches off. This automatic function ensures an efficient and convenient water supply.
4.3 Söndürmə
To temporarily shut down the pump, simply close all water outlets. The pump will switch off automatically. For extended periods of non-use or maintenance, disconnect the pump from the power supply.
5. Baxım
5.1 Müntəzəm yoxlamalar
Periodically check all connections for leaks. Ensure the suction line is free from blockages and the non-return valve is functioning correctly. Inspect the power cable for any signs of damage.
5.2 Təmizləmə
Pompanın xarici hissəsini reklamla təmizləyinamp cloth. Do not use harsh detergents or solvents. Ensure the motor's cooling fins are free from dust and debris to prevent overheating.
5.3 Qışda saxlama
If the pump is to be stored in an area where temperatures may drop below freezing, it is crucial to completely drain all water from the pump and connected lines. Use the tool-free water drain plug for this purpose. Store the pump in a dry, frost-free location.
6. Giderme
Müştəri dəstəyi ilə əlaqə saxlamazdan əvvəl, xahiş edirik aşağıdakı problemlərin aradan qaldırılması təlimatına baxın:
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Pompa işə düşmür | No power supply; Overload protection activated; Motor fault | Check power connection and circuit breaker; Allow motor to cool down; Contact service technician |
| Nasos işləyir, amma su verilmir | Pump not primed; Suction line blocked or leaking; Water source empty | Prime the pump; Check suction line for leaks or blockages; Ensure water source has sufficient water |
| Low pressure or flow rate | Partial blockage in suction/pressure line; Air in the system; Worn pump components | Check lines for blockages; Re-prime the pump; Contact service technician for inspection |
| Pump switches on and off frequently | Leak in the system; Pressure tank pre-charge pressure incorrect; Non-return valve faulty | Check entire system for leaks; Adjust pressure tank pre-charge; Inspect/replace non-return valve |
7. Texniki spesifikasiyalar
| Spesifikasiya | Dəyər |
|---|---|
| İstehsalçı | Metabo |
| İstinad nömrəsi | 600971000 |
| Rəng | Yaşıl |
| Stil | Daxili |
| Material | Metal |
| Güc mənbəyi | Elektrik kabeli |
| Cildtage | 240 volt |
| Nominal Giriş Gücü | 1100 Vt |
| Əşyaların sayı | 1 |
| Parçaların sayı | 1 |
| Maksimum axın sürəti | Saatda 4000 litr |
| Maximum Delivery Head | 46 Metr |
| Daxil olan komponentlər | METABO 600971000 - Domestic Water Pump HWW 4000/25 G 1100W max. pumping height 46 m |
| Batareyalar Daxildir | yox |
| Batareyalar Tələb olunur | yox |
| Çəki | 17.2 kiloqram |
| Diametri | 1 Pikometr |
| Ehtiyat hissələrinin mövcudluğu | 1 il |
| Məhsulun Ölçüləri (U x G x Y) | 62.6 x 52 x 28.78 sm |
| Element Model nömrəsi | 600971000 |
| Mənşə ölkəsi | Çin |
8. Zəmanət və Dəstək
Metabo products are manufactured to high-quality standards and undergo strict quality control. This product comes with a standard manufacturer's warranty, typically covering defects in materials and workmanship for a period specified at the time of purchase. Please retain your proof of purchase for warranty claims.
For technical assistance, spare parts, or warranty service, please contact your authorized Metabo dealer or visit the official Metabo website for local service centers. When contacting support, please have your model number (HWW 4000/25 G) and serial number (if applicable) ready.
- Onlayn dəstək: ziyarət edin www.metabo.com
- Müştəri Xidmətləri: Refer to your product packaging or the Metabo webregional əlaqə məlumatları üçün sayt.
