SATLINK WS-6916

SATLINK WS-6916 HD DVB-S DVB-S2 Digital Satellite Finder Instruction Manual

Model: WS-6916

1. Giriş

This manual provides detailed instructions for the operation and maintenance of your SATLINK WS-6916 HD DVB-S DVB-S2 Digital Satellite Finder. This device is designed to assist in the precise installation and alignment of satellite dishes, ensuring optimal signal reception. Please read this manual thoroughly before using the device to ensure correct and safe operation.

2. Əsas Xüsusiyyətlər

3. Paketin məzmunu

Aşağıda sadalanan bütün elementlərin paketinizə daxil olduğunu yoxlayın. Hər hansı əşyalar əskik və ya zədələnmişsə, satıcınızla əlaqə saxlayın.

4. Cihaz bitdiview

Familiarize yourself with the various components and ports of the SATLINK WS-6916.

Ön view of SATLINK WS-6916 Digital Satellite Finder with main menu on screen

Şəkil 4.1: Ön View. This image displays the front of the SATLINK WS-6916, showing its 3.5-inch color display with the main menu interface, the numeric keypad, navigation buttons, and function keys (F1, F2, F3, SCAN, AV-S, MENU, EXIT, OK, INFO, MUTE, TTXT, SUBT, TV/R, AUDIO). Indicator lights for POWER, 22K, 13V/18V, LOCK, and CHARGE are also visible above the function keys.

Yan view of SATLINK WS-6916 showing power switch, charging port, and USB port

Şəkil 4.2: Yan View (Sol). This image shows the left side of the device, featuring the power on/off switch, the DC charging input port, and a USB port for firmware updates and data transfer.

Geri view of SATLINK WS-6916 showing F-connector and speaker grille

Şəkil 4.3: Geri View. This image illustrates the rear of the SATLINK WS-6916, highlighting the F-connector for satellite signal input, the speaker grille for audio output, and the battery compartment.

5. Quraşdırma Təlimatları

5.1. Batareyanın doldurulması

Before initial use, fully charge the integrated 7.4V 3000 mAh battery.

  1. Connect the 220V charging adapter to the DC input port on the side of the device.
  2. Adapteri standart bir divar prizinə qoşun.
  3. The "CHARGE" indicator light on the front panel will illuminate.
  4. Allow the device to charge until the "CHARGE" indicator light changes color or turns off, indicating a full charge.
  5. Alternatively, use the 12V car charger adapter for charging in a vehicle.

5.2. İlkin işə salın

Cihazı işə salmaq üçün:

6. Əməliyyat Təlimatları

6.1. Satellite Dish Alignment

The primary function of the WS-6916 is to assist in aligning your satellite dish for optimal signal reception.

  1. Connect the LNB: Connect the LNB cable from your satellite dish to the F-connector input on the WS-6916 (refer to Figure 4.3).
  2. Select Satellite: From the main menu, navigate to "Satellite Find" or "Satellite Installation" and select the desired satellite you wish to receive (e.g., Astra 19.2E, Hotbird 13E).
  3. Input Coordinates (Optional): If using the angle calculation feature, input your geographical coordinates to determine the optimal elevation and azimuth for your LNB.
  4. Adjust Dish Position: Slowly adjust the azimuth (horizontal angle) and elevation (vertical angle) of your satellite dish. Observe the signal strength and quality indicators on the WS-6916 display.
  5. Optimize Signal: Continue fine-tuning the dish position until the signal strength and quality readings are maximized. The acoustic signal will also indicate stronger reception.
  6. Kilid siqnalı: Once the signal is optimized, tighten your dish mounting bolts. The "LOCK" indicator light on the device will illuminate when a stable signal is acquired.
  7. Skan kanalları: After successful alignment, you can perform a channel scan (blind scan, transponder scan, or full scan) to find available TV and radio channels.

6.2. Menyu Naviqasiyası

Use the navigation buttons (up, down, left, right) and the "OK" button to move through menus and confirm selections. The "MENU" button typically returns to the previous menu or the main menu, and "EXIT" can be used to exit current operations.

6.3. Mikroproqram yeniləmələri

The device supports firmware updates via its USB port.

  1. Ən son proqram təminatını yükləyin file from the official SATLINK support websaytı USB flash sürücüsünə köçürün.
  2. Insert the USB flash drive into the USB port on the WS-6916.
  3. Navigate to the "System Setting" or "Others" menu on the device.
  4. Select the "Firmware Upgrade" option and follow the on-screen prompts.
  5. Yeniləmə prosesi zamanı cihazı söndürməyin.

7. Baxım

8. Giderme

ProblemMümkün SəbəbHəll
Cihaz işə düşmür.Batareya boşalıb və ya nasazdır.Charge the battery using the provided adapter. Ensure the power switch is in the "ON" position.
Siqnal aşkarlanmadı.Incorrect LNB connection, wrong satellite selected, or dish misalignment.Verify LNB cable connection. Ensure the correct satellite is selected in the menu. Adjust dish azimuth and elevation slowly.
Weak signal quality.Dish not precisely aligned, LNB faulty, or obstruction.Fine-tune dish alignment. Check LNB for damage. Ensure no physical obstructions block the signal path.
Ekran boş və ya donub.Software error or temporary malfunction.Perform a soft reset by turning the device off and then on again. If the issue persists, consider a firmware update.

9. Texniki spesifikasiyalar

XüsusiyyətDetal
Model nömrəsiWS-6916
BrendSATLINK
Ekran3.5" TFT LC Color Display
UyğunluqDVB-S, DVB-S2, MPEG-2, MPEG-4, FTA
ƏlaqələrAV Input, AV Output, HDMI Output, USB Port (1)
Səs Çıxış ModuStereo
Dəstəklənən Audio FormatPCM
Cildtage12 volt
Batareya7.4V 3000 mAh Rechargeable (Integrated)
Xüsusi XüsusiyyətlərSatellite measurement device, mute function for sound, flashlight
Tövsiyə olunan istifadəInstallation and positioning of satellite dishes

10. Zəmanət və Dəstək

Information regarding specific warranty terms and conditions for the SATLINK WS-6916 is not provided in this manual. Please refer to the documentation included with your purchase or contact your retailer or the manufacturer directly for warranty details and technical support.

For firmware updates and additional resources, please visit the official SATLINK websayt.