BLS T01L LED Closet Light User Manual

1. Giriş

The BLS T01L LED Closet Light is a versatile, motion-sensing lighting solution designed for various indoor applications. It features 20 super bright LEDs, offering 180 lumens of soft white light. This light can be powered by 3 AA batteries for wireless operation or via a 5V USB DC input for constant lighting. Its adjustable light beam and motion sensor provide customizable illumination and detection.

Image 1.1: The BLS T01L LED Closet Light, a 14-inch white light bar with a central motion sensor.

2. Qutuda nə var

Please verify that all components are present upon opening the package:

• 1 x BLS Under Cabinet Light (Model T01L)
• 1 x DC kabel
• 2 x 3M Yapışqan lentlər
• 1 x Təlimat kitabçası (bu sənəd)

Image 2.1: The BLS T01L LED Closet Light shown with its packaging, DC cable, and mounting accessories.

3. Spesifikasiyalar

4. Quraşdırma və Quraşdırma

Follow these steps to set up your BLS T01L LED Closet Light:

4.1. Cihazın enerji təchizatı

The light can be powered by 3 AA batteries or a 5V USB DC input.

1. Batareyanın quraşdırılması:
   • Locate the battery compartment on the back of the light.
   • Gently push to open the center part of the battery compartment cover.
   • Insert three AA batteries (not included). One battery slides into the hole on the left, the second into the hole on the right, and the third goes into the open center between the first two. Ensure correct polarity (+/-).
   • Batareya bölməsinin qapağını etibarlı şəkildə bağlayın.
2. USB DC Power:
   • Connect the provided DC cable to the light's DC input port.
   • Plug the other end of the DC cable into a 5V USB power source (e.g., USB wall adapter, power bank).
   • Qeyd: If using USB DC power, it is recommended to remove the AA batteries to prevent potential issues or unnecessary battery drain.

Image 4.1: Diagram illustrating the 14-inch length of the light and its power options: 3 AA batteries or USB cable.

4.2. İşığın quraşdırılması

The BLS T01L offers multiple installation options:

• Yapışqan montaj: Peel the backing from the 3M adhesive tapes and firmly press the light onto a clean, dry surface.
• Vida montajı: Use the provided screws to secure the light to the desired surface. This method offers a more permanent installation.

The light can be mounted either horizontally or vertically, depending on your application needs.

Image 4.2: Diagram showing horizontal and vertical installation options using screws or 3M adhesive stickers.

5. Əməliyyat Təlimatları

5.1. Modu Seçimi

The light features a slide switch with three modes:

• AVTO Rejimi: The light will automatically turn on when motion is detected within 10 feet in a dark environment. It will remain on for 20 seconds after motion ceases. The built-in light sensor ensures it only activates when ambient light is low (e.g., at night).
• ON rejimi: The light will remain continuously on, regardless of motion or ambient light conditions.
• OFF rejimi: İşıq sönmüş qalacaq.

5.2. Adjusting Motion Sensor Sensitivity

The motion sensor can be adjusted to modify its detection sensitivity and range:

• The motion sensor module is designed to swivel. Gently rotate the sensor to adjust its detection angle.
• This allows you to fine-tune the area where motion is detected, preventing unwanted activations.

Image 5.1: Illustration of how to adjust the motion sensor to control sensitivity.

5.3. Adjusting Light Beam Angle

The entire light fixture can be adjusted to direct the light beam as desired:

• The light is mounted on a bracket that allows it to swivel.
• Gently pivot the light to achieve the desired illumination angle (e.g., 90°, 120°, 180°).

Şəkil 5.2: Məsamples of adjustable light beam angles (90°, 120°, 180°) for optimal illumination.

6. Baxım

6.1. Batareyanın dəyişdirilməsi

When the light output diminishes or the motion sensor becomes less responsive, it may be time to replace the batteries.

1. Open the battery compartment cover as described in Section 4.1.
2. Köhnə AA batareyalarını çıxarın.
3. Insert three new AA batteries, ensuring correct polarity.
4. Batareya bölməsinin qapağını bağlayın.

Qeyd: For optimal performance and to avoid frequent battery changes, consider using high-quality alkaline or rechargeable AA batteries. If using the USB DC power option, remove the AA batteries.

6.2. Təmizləmə

To maintain the appearance and functionality of your light:

• Ensure the light is in the OFF position or disconnected from power before cleaning.
• Səthi yumşaq, quru bir parça ilə silin.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.

7. Giderme

If you encounter issues with your BLS T01L LED Closet Light, refer to the following common problems and solutions:

8. Zəmanət Məlumatı

The BLS T01L LED Closet Light comes with an extended warranty. For specific details regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or contact BLS customer support.

9. Müştəri dəstəyi

If you have any questions, require technical assistance, or need further support, please contact BLS customer service through the following channels:

• E-poçt: Refer to your product packaging or the official BLS webən aktual əlaqə e-poçtu üçün sayt.
• Websayt: Visit the official BLS webTez-tez verilən suallar və dəstək resursları üçün sayt.
• Amazon Mağazası: Siz də ziyarət edə bilərsiniz BLS Store on Amazon məhsul məlumatı və satıcı ilə əlaqə seçimləri üçün.