JBL CONTROL 52

JBL Professional Control 52 Surface-Mount Satellite Speaker

Model: CONTROL 52

Təlimat kitabçası

Giriş

The JBL Professional Control 52 is a stylish surface-mount satellite loudspeaker designed for subwoofer-satellite loudspeaker systems. It delivers superb high-fidelity sound through a low-distortion 60 mm (2.5 inch) driver. Key features include a secondary bucking magnet for high efficiency, a rubber half-roll surround for enhanced bass performance, a 19 mm (0.75 inch) copper-clad aluminum wire voice coil on a vented Nomex former for high fidelity and reliability, and a copper-capped pole piece for consistent impedance and extended high-frequency response. The included wall bracket allows for angling the speaker up to 45 degrees off-axis, providing flexible placement options.

Əsas Xüsusiyyətlər

Qutuda nə var

Quraşdırma və Quraşdırma

The Control 52 satellite speakers are designed for surface mounting and come with all necessary brackets for installation. Ensure you have appropriate tools and follow local building codes for secure mounting.

JBL Control 52 Satellite Speaker, front view

Şəkil 1: Ön view of the JBL Control 52 Satellite Speaker.

Dinamiklərin quraşdırılması

  1. Quraşdırma yerini müəyyənləşdirin: Choose a location on a wall or other suitable surface that provides optimal sound dispersion and is structurally sound. The speakers can be angled up to 45 degrees.
  2. Mötərizələr əlavə edin: Use the included wall-mount brackets. Securely attach the brackets to the chosen surface using appropriate screws and anchors (not included, depending on wall material).
  3. Naqilləri birləşdirin: Dinamik naqillərini özünüzə qoşun amplifier to the binding posts on the back of each Control 52 speaker. Ensure correct polarity (red to positive, black to negative).
  4. Dağ Dinamikləri: Attach the Control 52 speakers to the installed brackets. The design allows for various orientations (vertical or horizontal) and angles.
Pair of JBL Control 52 Satellite Speakers with wall mounts

Figure 2: A pair of JBL Control 52 Satellite Speakers, showing the integrated wall mounts.

Naqil Bağlantıları

The Control 52 speakers are passive and require an external amplifier. Connect the speaker wires to the spring-loaded terminals on the rear of each speaker. Match the positive (+) terminal on the speaker to the positive (+) terminal on your amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on your ampömürlük.

Yan view of JBL Control 52 Satellite Speaker showing mounting bracket

Şəkil 3: Yan view of the JBL Control 52 Satellite Speaker, highlighting the adjustable mounting bracket.

Video Guide: Speaker Wiring and Mounting

Video 1: This video demonstrates general speaker wiring and mounting techniques, which can be applied to the JBL Control 52 speakers. It shows how to connect speaker cables and secure speakers using brackets.

Əməliyyat Təlimatları

Once properly installed and connected to a compatible amplifier, the JBL Control 52 speakers are ready for use. These speakers are designed to work as part of a subwoofer-satellite system, meaning they handle mid-range and high frequencies, while a separate subwoofer handles the bass.

Yandırılır/Söndürülür

The Control 52 speakers are passive and do not have their own power switch. They are powered by the connected amplifier. Turn your amplifier on or off to control the speakers.

Səs səviyyəsinə nəzarət

Səs səviyyəsini öz seçiminizdən istifadə edərək tənzimləyin amplifier or audio source. Avoid setting the volume too high, which can cause distortion and potentially damage the speakers.

Optimal Yerləşdirmə

For the best audio experience, position the speakers to create a balanced sound field. Experiment with the angling feature of the wall brackets to direct sound towards the primary listening area. When used with a subwoofer, ensure the subwoofer is placed in a location that provides even bass distribution throughout the room.

Baxım

Regular maintenance helps ensure the longevity and optimal performance of your JBL Control 52 speakers.

Problemlərin aradan qaldırılması

If you experience issues with your JBL Control 52 speakers, refer to the following common troubleshooting steps:

ProblemMümkün SəbəbHəll
Dinamiklərdən səs gəlmir
  • Amplifier is off or muted.
  • Incorrect speaker wiring.
  • Audio source not playing or improperly connected.
  • təmin etmək amplifier is on and volume is up, not muted.
  • Check all speaker wire connections for correct polarity (+ to + and - to -).
  • Verify audio source is active and connected correctly to the ampömürlük.
Təhrif edilmiş və ya aydın olmayan səs
  • Volume too high on ampqaldırıcı və ya mənbə.
  • Zədələnmiş dinamik teli.
  • Səhv ampqaldırıcı parametrlər.
  • Reduce volume on ampqaldırıcı və ya audio mənbəyi.
  • Dinamik tellərini zədələnmə üçün yoxlayın və zəruri hallarda dəyişdirin.
  • Yoxlayın amplifier settings (e.g., tone controls, crossover settings) to ensure they are appropriate for satellite speakers.
Bir dinamik işləmir
  • Həmin dinamik üçün boş və ya səhv naqillər.
  • Nasaz dinamik.
  • Check wiring connections for the non-working speaker.
  • Swap the non-working speaker with a working one to determine if the speaker itself is faulty.

Spesifikasiyalar

Model AdıNƏZARƏT 52
BrendJBL
Dinamik növüSatellite Speaker (for Subwoofer-Satellite Loudspeaker System)
Montaj növüSəth montajı
Natiq Amplifikasiya növüPassiv
Empedans16 Ohm
Tezliyə cavab140 Hz – 20 kHz
Dinamikin Maksimum Çıxış Gücü600 Vt (pik)
Vuferin diametri60 mm (2.5 düym)
Tweeter diametri19 mm (0.75 düym)
Məhsul Ölçüləri2"D x 5"W x 3"H (approximate, per speaker)
Maddə Çəkisi3.7 funt (natiq üçün)
RəngQara
MaterialAlüminium
Daxili / Xarici İstifadəDaxili
Bağlantı texnologiyasıSimli
Tövsiyə olunan istifadələrƏtraf səs sistemləri üçün
UPC050036905190

Zəmanət və Dəstək

The JBL Professional Control 52 Surface-Mount Satellite Speaker comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official JBL websayt.

For technical support, service, or additional product information, please contact JBL customer service or visit the Amazon-da JBL Mağazası.

Əlaqədar Sənədlər - NƏZARƏT 52

Preview JBL 5000 Series Cinema Systems: İstifadəçi Təlimatı və Spesifikasiyalar
5671, 5672 və 5674 modelləri üçün sistem konfiqurasiyaları, rəqəmsal nəzarət, birləşmələr, güc tələbləri, dinamiklərin yerləşdirilməsi və texniki spesifikasiyalar haqqında ətraflı məlumat verən JBL 5000 Series Cinema Systems üçün hərtərəfli istifadəçi təlimatı.
Preview JBL Control 416C/T Standart Əhatə Seriyası Tavan Dinamiki - Texniki Xüsusiyyətlər
Kommersiya və peşəkar audio qurğular üçün nəzərdə tutulmuş 6.5 ​​düymlük ikitərəfli koaksial tavan dinamiki olan JBL Control 416C/T üçün ətraflı texniki xüsusiyyətlər, xüsusiyyətlər və performans məlumatları.
Preview JBL 4367 İstifadəçi Təlimatı: 15 düymlük 2 yollu Döşəmə Dinamiki
Bu istifadəçi təlimatı JBL 4367, 15 düymlük 2 istiqamətli döşəməli dinamik haqqında ətraflı məlumat verir. Optimal audio performansı üçün quraşdırma, yerləşdirmə, əlaqələr, nəzarət və qayğı haqqında məlumat əldə edin.
Preview JBL JS-120 Dinamik Standı - Xüsusiyyətlər, Spesifikasiyalar və Montaj
JBL JS-120 Dinamik Standı haqqında ətraflı məlumat, o cümlədən onun xüsusiyyətləri, texniki xüsusiyyətləri, uyğun dinamik modelləri və montaj təlimatları. Təkmilləşdirilmiş audio performans və sabitlik üçün nəzərdə tutulmuşdur.
Preview Professional Ekran Kanal Dinamikləri üçün JBL 5000 Series Cinema Systems İstifadəçi Təlimatı
JBL 5000 Series Cinema Systems (modellər 5671, 5672, 5674) üçün hərtərəfli istifadəçi təlimatı. Quraşdırma, konfiqurasiya, rəqəmsal nəzarət, əlaqələr, güc, yerləşdirmə və peşəkar kino audio üçün ətraflı spesifikasiyaları əhatə edir.
Preview JBL STX812M Technical Manual and Specifications
Detailed technical manual and specifications for the JBL STX812M professional loudspeaker, including acoustic, electrical, and physical characteristics, wiring diagrams, and component part lists.