JBL C521P

JBL Selenium C521P Passive Speaker System User Manual

Model: C521P | Brand: JBL Selenium

1. Giriş

This manual provides essential information for the proper installation, operation, and maintenance of your JBL Selenium C521P passive speaker system. Please read this manual thoroughly before using the product to ensure optimal performance and safety.

2. Təhlükəsizlik Məlumatı

Həmişə aşağıdakı təhlükəsizlik tədbirlərinə əməl edin:

3. Paketin məzmunu

The JBL Selenium C521P passive speaker system typically includes:

Note: Speaker wire is typically sold separately and is not included.

4. Məhsul bitdiview

The JBL Selenium C521P is a compact, two-way passive speaker designed for ambient sound reinforcement. It features a robust construction and a design optimized for easy integration into various environments.

4.1 Komponentlər

Arxa view of two JBL Selenium C521P passive speakers, showing the terminal connections and mounting brackets.

Şəkil 1: Arxa view of two JBL Selenium C521P speakers. This image displays the rear panel of two JBL Selenium C521P speakers. Each speaker features a pair of spring-loaded terminal connectors for audio input, typically red for positive and black for negative. The integrated mounting brackets are visible on the sides, allowing for flexible installation. A product label with model number C521P, power handling, and impedance is affixed to the back of each unit.

5. Quraşdırma

5.1 Dinamikin Yerləşdirilməsi

Consider the following when positioning your speakers:

5.2 Naqil birləşmələri

Hər hansı bir əlaqə qurmazdan əvvəl, əmin olun amplifier/receiver is turned OFF.

  1. Dinamik telini hazırlayın: Strip approximately 1/2 inch (12mm) of insulation from the ends of your speaker wires. Twist the bare strands tightly.
  2. Dinamikə qoşulun: Press down on the colored tab of the spring-loaded terminal on the back of the C521P speaker. Insert the positive (+) wire (often marked with a stripe or color) into the red terminal and the negative (-) wire into the black terminal. Release the tab to secure the wire.
  3. -a qoşulun Ampömürlük: Connect the other end of the speaker wire to the corresponding positive (+) and negative (-) speaker output terminals on your amplifier or receiver. Ensure correct polarity for both speakers.
  4. Bağlantıları yoxlayın: Double-check all connections to ensure they are secure and that no stray wire strands are touching, which could cause a short circuit.

Important: Always match the impedance. The C521P speakers have an impedance of 8 Ohms. Refer to your amplifier's manual for compatible speaker impedance ratings.

6. işlək

Once the speakers are properly connected to your ampqaldırıcı/qəbuledici:

  1. Güc Aktivdir: Özünüzü yandırın ampqaldırıcı/qəbuledici.
  2. Səs səviyyəsinə nəzarət: Start with the volume at a low level and gradually increase it to your desired listening level.
  3. Mənbə seçimi: Select the audio source on your ampqaldırıcı/qəbuledici.
  4. Zövq alın: Your JBL Selenium C521P speakers are now ready for use.

Avoid playing audio at excessively high volumes for extended periods, as this can cause hearing damage and potentially damage the speakers.

7. Baxım

Dinamiklərinizin uzunömürlülüyünü və optimal performansını təmin etmək üçün:

8. Giderme

If you encounter issues with your JBL Selenium C521P speakers, refer to the following common problems and solutions:

ProblemMümkün SəbəbHəll
Bir və ya hər iki dinamikdən səs yoxdur.Boş və ya səhv naqillər. Amplifier/receiver off or incorrect source selected. Speaker damaged.Check all speaker wire connections for proper polarity and secure fit. Ensure amplifier is on and correct input source is selected. Test with another speaker or ampmümkünsə, qaldırıcı.
Təhrif edilmiş səs.Səs çox yüksəkdir. Amplifier clipping. Incorrect impedance. Damaged speaker.Reduce volume. Ensure amplifier is not overdriven. Verify amplifier impedance compatibility. Inspect speaker for visible damage.
Weak or unbalanced sound.Yanlış balans parametrləri aktivdir amplifier. One speaker wired out of phase.Yoxlayın amplifier balance controls. Verify speaker wire polarity (+ to + and - to -) for both speakers.
Zümzümə və ya vızıldama səsi.Ground loop. Interference from other electronics. Loose connections.Ensure all audio components are plugged into the same power outlet or power strip. Separate audio cables from power cables. Check all connections.

If the problem persists after trying these solutions, contact qualified service personnel.

9. Spesifikasiyalar

Technical specifications for the JBL Selenium C521P Passive Speaker System:

XüsusiyyətDetal
ModelC521P
BrendJBL Selenium
Dinamik növü2-way Passive Speaker
RMS Power Handling40W
Musiqi proqramı güc80W
Empedans8 Ohm
Tezliyə cavab (-10 dB)95 Hz - 20,000 Hz
Vuferin diametri5 düym (127 mm)
Woofer Konus MaterialıPolipropilen
Woofer Ətraflı MaterialNitril kauçuk
Tweeter diametri0.75 düym (19 mm)
Tweeter Diaphragm MaterialPEI
Şkaf TipiBas refleksi
Şkaf materialıABS
ƏlaqələrSpring-loaded Terminals
RəngQara
Dimensions (Single Speaker L x H x D)22 sm x 15 sm x 14 sm (təxminən)
Çəki (cüt)4.3 kq
Montaj növüShelf Mount / Integrated Bracket
Bağlantı texnologiyasıSimli
Uyğun CihazlarSmartphone, Tablet, Laptop, Desktop (via ampqaldırıcı/qəbuledici)

10. Zəmanət və Dəstək

For warranty information and technical support, please refer to the official JBL website or contact your authorized JBL dealer. Keep your purchase receipt as proof of purchase for warranty claims.

Qeyd: Xüsusi zəmanət şərtləri bölgəyə görə dəyişə bilər.