Alecto WS-1050 Rəqəmsal Hava Stansiyası İstifadəçi Təlimatı

1. Giriş

Aldığınız üçün təşəkkür edirikasing the Alecto WS-1050 Digital Weather Station. This device provides accurate indoor and outdoor temperature readings, allowing you to monitor environmental conditions with ease. The wireless external probe ensures flexible placement for outdoor temperature measurement.

Əsas xüsusiyyətlərə aşağıdakılar daxildir:

• Simultaneous display of indoor and outdoor temperatures.
• Wireless external probe for flexible outdoor placement.
• Indication of temperature trends.
• Temperature display in Celsius (°C) or Fahrenheit (°F).

2. Təhlükəsizlik Məlumatı

Cihazı istifadə etməzdən əvvəl aşağıdakı təhlükəsizlik tədbirlərini oxuyun və başa düşün:

• Do not expose the main unit or outdoor sensor to extreme temperatures, direct sunlight, or excessive moisture.
• Use only the specified battery type (AAA) and ensure correct polarity during installation.
• Köhnə və yeni batareyaları və ya müxtəlif növ batareyaları qarışdırmayın.
• İstifadə olunmuş batareyaları yerli qaydalara uyğun olaraq tullayın.
• Cihazı uşaqların əli çatmayan yerdə saxlayın.
• Cihazı özünüz sökməyə və ya təmir etməyə çalışmayın. İxtisaslı xidmət personalı ilə əlaqə saxlayın.

3. Paketin məzmunu

Bütün əşyaların paketdə olduğunu yoxlayın:

• Alecto WS-1050 Main Unit (Indoor Display)
• Simsiz Xarici Sensor
• İstifadəçi Təlimatı (bu sənəd)

4. Məhsul bitdiview

4.1 Main Unit (Indoor Display)

Şəkil 1: Ön view of the Alecto WS-1050 main unit, displaying indoor and outdoor temperatures.

The main unit features a clear LCD display showing indoor temperature, outdoor temperature, and temperature trends. It is designed for indoor use.

Şəkil 2: Arxa view of the Alecto WS-1050 main unit, highlighting the battery compartment and control buttons.

On the back of the main unit, you will find the battery compartment and control buttons for adjusting settings.

4.2 Simsiz Xarici Sensor

Figure 3: The Alecto WS-1050 main unit alongside its wireless outdoor sensor.

The compact outdoor sensor wirelessly transmits temperature data to the main unit. It is designed to be weather-resistant for outdoor placement.

5. Quraşdırma

5.1 Batareyanın quraşdırılması

1. For the Wireless Outdoor Sensor: Open the battery compartment on the back of the outdoor sensor. Insert the required AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.
2. Əsas bölmə üçün: Open the battery compartment on the back of the main unit (refer to Figure 2). Insert the required AAA batteries, ensuring correct polarity (+/-). Close the compartment securely.

Əhəmiyyətli: For optimal performance and to ensure proper synchronization, it is recommended to install batteries in the outdoor sensor first, then in the main unit.

5.2 Sensor Synchronization

After installing batteries in both units, the main unit will automatically attempt to connect with the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature will appear on the main unit's display.

5.3 Yerləşdirmə Tövsiyələri

• Əsas vahid: Place the main unit indoors, away from direct sunlight, heat sources, or drafts that could affect its indoor temperature readings.
• Xarici Sensor: For accurate outdoor readings, place the sensor in a shaded area, protected from direct rain and sunlight. Ensure it is within the wireless range of the main unit (typically up to 30 meters in open air, less with obstructions). Avoid placing it near large metal objects or electrical appliances that could interfere with the wireless signal.

Şəkil 4: Məsələnample placement of the main unit indoors and the outdoor sensor mounted on an exterior wall.

6. Əməliyyat Təlimatları

6.1 Məlumatı göstərin

The main unit's LCD display shows the following information:

• Daxili temperatur: Current temperature measured by the main unit.
• Xarici Temperatur: Current temperature transmitted by the wireless outdoor sensor.
• Temperature Trend Indicators: Arrows next to the temperature readings indicate if the temperature is rising, falling, or stable.

Figure 5: The Alecto WS-1050 main unit in operation, showing temperature readings.

6.2 Changing Temperature Units (°C/°F)

To switch between Celsius (°C) and Fahrenheit (°F), press the '°C/°F' button located on the back of the main unit (refer to Figure 2).

6.3 MAX/MIN Temperature Records

The device records the maximum and minimum temperatures measured since the last reset. To view these records, press the 'MAX/MIN' button on the back of the main unit. Pressing it repeatedly will cycle through maximum indoor, minimum indoor, maximum outdoor, and minimum outdoor temperatures. To clear the records, press and hold the 'MAX/MIN' button while viewqeydləri daxil etmək.

6.4 Channel Selection (if applicable)

If you are using multiple outdoor sensors (sold separately), you can switch between channels (CH1, CH2, CH3) by pressing the 'CH' button on the back of the main unit. The display will indicate which channel's outdoor temperature is currently shown.

7. Baxım

• Təmizləmə: Cihazı yumşaq bir parça ilə silin, damp parça. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
• Batareyanın dəyişdirilməsi: When the battery indicator appears on the display, replace the batteries in the respective unit (main unit or outdoor sensor). Follow the battery installation steps in Section 5.1.
• Yaddaş: Cihazı uzun müddət saxlasanız, sızmanın qarşısını almaq üçün batareyaları çıxarın.

8. Giderme

9. Spesifikasiyalar

10. Zəmanət və Dəstək

Alecto products are designed and manufactured to the highest standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or visit the official Alecto websayt. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.