1. Giriş
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Məhsulun xüsusiyyətləri
- Universal Uyğunluq: Controls a wide range of devices.
- Self-Learning Function: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Böyük Düymələr: Designed with oversized, clearly marked buttons for enhanced usability.
- İntuitiv Dizayn: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Quraşdırma
3.1. Batareyanın quraşdırılması
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Pultun arxasındakı batareya bölməsinin qapağını tapın.
- Qapağı aşağı sürüşdürün və ya açmaq üçün mandalı basın və qaldırın.
- Müsbət (+) və mənfi (-) terminalların bölmənin içərisindəki işarələrlə düzgün uyğunlaşdığına əmin olaraq iki AAA batareyasını daxil edin.
- Batareya bölməsinin qapağını təhlükəsiz şəkildə kliklənənə qədər yerinə sürüşdürərək dəyişdirin.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Öyrənmə rejiminə daxil olun: basın və saxlayın GÜC button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Siqnal ötürmə: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Digər düymələr üçün təkrarlayın: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Öyrənmə Rejimindən Çıxın: Once all desired buttons are programmed, press the GÜC button on the Simply remote again to exit learning mode. The indicator light will turn off.
Qeyd: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Şəkil: Ön view of the Simply SUPTLB001 remote control.
4. Əməliyyat Təlimatları
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Cihaz seçimi: düyməsini basın A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Yandırma/Söndürmə: düyməsini basın GÜC Seçilmiş cihazı yandırmaq və ya söndürmək üçün düymə.
- Səs səviyyəsinə nəzarət: istifadə edin V+ səsi artırmaq üçün düyməni və V- səsi azaltmaq.
- Program/Channel Control: istifadə edin P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV Girişi: düyməsini basın AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Baxım
- Təmizləmə: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Batareyanın dəyişdirilməsi: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Yaddaş: Pultu quru yerdə, birbaşa günəş işığından və həddindən artıq temperaturdan uzaqda saxlayın.
6. Giderme
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Pult işləmir. | Batareyalar bitib və ya səhv daxil edilib. | Düzgün polariteyi təmin edərək, batareyaları yeni AAA batareyaları ilə əvəz edin. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Uzaqdan atəş diapazonu zəifdir. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Spesifikasiyalar
| Brend | Üstün Elektronika |
| Model Adı | Sadəcə |
| Model nömrəsi | SUPTLB001 |
| Rəng | Qara |
| Bağlantı texnologiyası | Infrared (IR) Learning Function |
| Uyğun Cihazlar | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Düymələrin sayı | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Batareya növü | 2 x AAA (not rechargeable) |
| Maksimum Aralıq | 10 Metr (təxminən 33 fut) |
| Ölçülər (təxminən) | 16.5 sm (Uzunluq) x 4.5 sm (Eni) |
Şəkil: Yan view of the remote control with approximate dimensions.
8. Zəmanət və Dəstək
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 il satın alındığı tarixdən.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics websayt. Zəmanətin təsdiqlənməsi üçün satın alma sənədinizi saxlayın.