Extech UV505 Pocket UV-AB Light Meter Instruction Manual

1. Giriş

The Extech UV505 is a compact, portable UV-AB light meter designed for measuring ultraviolet radiation from both natural and artificial light sources. This device is suitable for various applications including outdoor UV exposure assessment, medical testing, laboratory research, industrial quality control, educational purposes, electronics, and forensic investigations. It features a backlit display, a cosine-corrected sensor for accurate readings, two selectable measurement ranges, a zero adjustment function, data hold, and an automatic power-off feature to conserve battery life.

2. Məhsulun xüsusiyyətləri

• Kompakt və Portativ Dizayn: Easily fits in a hand or pocket for convenient on-the-go monitoring in various environments.
• UVA and UVB Measurement: Dual-sensor technology enables simultaneous and accurate tracking of both UVA and UVB light intensity.
• Data Capture Functions: Includes Peak Hold, Min/Max, and real-time readings to analyze fluctuations and critical UV peaks.
• Arxa işıqlı LCD Ekran: Large, easy-to-read screen with backlight for clear visibility in diverse lighting conditions.
• Davamlı tikinti: Rugged design ensures reliable performance in field and laboratory settings.
• Avtomatik söndürmə: Automatically shuts off to preserve battery life during extended use.
• Cosine Corrected Sensor: Provides accurate measurements regardless of the angle of incidence of the UV light.

3. Paketin məzmunu

Bütün əşyaların mövcud olduğunu və yaxşı vəziyyətdə olduğunu yoxlayın:

• Extech UV505 Pocket UV-AB Light Meter
• Two AAA batteries (pre-installed or included separately)
• Qoruyucu çanta

4. Komponent İdentifikasiyası

Şəkil 1: Ön view of the Extech UV505 Pocket UV-AB Light Meter, showing the UV sensor, LCD display, and control buttons.

Figure 2: The Extech UV505 meter being held in a hand, demonstrating its portable size and outdoor usability.

The Extech UV505 features a UV sensor at the top, a large LCD display in the center, and several control buttons below the display. The main power button is typically orange and centrally located. Other buttons include ZERO, UNIT, and a backlight button (often indicated by a light bulb icon) and a HOLD button (indicated by 'H'). The battery compartment is located on the rear of the device.

5. Quraşdırma

5.1 Batareyanın quraşdırılması

1. Sayğacın arxasındakı batareya bölməsini tapın.
2. Press the release button (if present) and slide open the battery cover.
3. Düzgün qütblüyü (+ və -) təmin edərək iki AAA batareyası taxın.
4. Replace the battery cover and ensure it clicks securely into place.

6. Əməliyyat Təlimatları

6.1 Yandırma/Söndürmə

• To power on the meter, press the orange power button.
• To power off the meter, press and hold the orange power button until the display turns off. The meter also features an auto power-off function after a period of inactivity.

6.2 Ölçmə

1. Sayğacda güc.
2. Point the UV sensor directly towards the UV light source you wish to measure.
3. Read the UV intensity value displayed on the LCD screen.

6.3 Zero Function

• To ensure accurate readings, especially in low UV environments, use the ZERO function.
• Cover the UV sensor completely to block all light.
• Press the 'ZERO' button. The display should show '0' or a very small value.

6.4 Vahid Seçimi

• Press the 'UNIT' button to cycle through available measurement units, typically µW/cm² (microwatts per square centimeter) and mW/cm² (milliwatts per square centimeter).

6.5 Məlumatların saxlanması

• Press the 'HOLD' button (often marked 'H') to freeze the current reading on the display.
• Press 'HOLD' again to release the reading and return to live measurement.

6.6 Min/Max Function

• While measuring, press the 'MIN/MAX' button (or similar, depending on model) to display the minimum or maximum UV intensity recorded since the function was activated.
• Cycle through Min, Max, and current readings by pressing the button repeatedly.
• To clear Min/Max memory, typically press and hold the 'MIN/MAX' button, or power cycle the device.

6.7 Arxa işıq

• Press the backlight button (light bulb icon) to illuminate the LCD display for better visibility in low-light conditions.
• Press it again to turn off the backlight.

7. Baxım

7.1 Təmizləmə

• Sayğacın c-ni silinasing yumşaq ilə, damp parça. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
• Keep the UV sensor clean and free from dust or debris to ensure accurate readings. Use a soft brush or compressed air if necessary.

7.2 Saxlama

• Uzun müddət istifadə edilmədikdə, sızmanın qarşısını almaq üçün batareyaları çıxarın.
• Store the meter in its protective pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

7.3 Batareyanın dəyişdirilməsi

• Ekranda batareyanın az olduğu göstəricisi göründükdə, batareyaları Bölmə 5.1-də təsvir edildiyi kimi dəyişdirin.

8. Giderme

• Sayğac işə düşmür: Batareyaların quraşdırılmasını yoxlayın və batareyaların təzə olduğundan əmin olun.
• Qeyri-dəqiq oxunuşlar: Ensure the sensor is clean and unobstructed. Perform a ZERO calibration. Verify correct unit selection.
• Ekran tutqun və ya titrəyir: Batareyaları dəyişdirin.

9. Spesifikasiyalar

10. Zəmanət və Dəstək

For warranty information or technical support, please refer to the official Extech websaytına daxil olun və ya müştəri xidməti şöbəsi ilə əlaqə saxlayın. Satınalma qəbzinizi hər hansı zəmanət iddiaları üçün satınalmanın sübutu kimi saxlayın.