1. Giriş
Thank you for choosing the STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level. This precision instrument is designed to project bright, clear green laser lines for various leveling and alignment tasks. This manual provides essential information for safe operation, proper setup, and effective use of your laser level. Please read it thoroughly before first use and keep it for future reference.
2. Təhlükəsizlik Məlumatı
XƏBƏRDARLIQ: This is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at other people or reflective surfaces.
- Always operate the laser level in a safe manner, following all instructions in this manual.
- Do not attempt to modify or disassemble the laser level. This can cause serious injury and will void the warranty.
- Keep the laser level out of reach of children and untrained personnel.
- Ensure the work area is free from obstructions and potential hazards.
- Use only the specified battery type (AA alkaline batteries) and ensure correct polarity.
- Sızmanın qarşısını almaq üçün cihaz uzun müddət istifadə edilməyəcəksə, batareyaları çıxarın.
- Cihazı həddindən artıq temperaturdan, nəmdən və birbaşa günəş işığından qoruyun.
3. Paketin məzmunu
Qablaşdırmadan çıxararkən, aşağıda sadalanan bütün əşyaların mövcud olduğunu və zədələnmədiyini yoxlayın:
- STANLEY FATMAX FMHT77586-1 Green Beam Cross Line Laser Level
- Yumşaq Daşıma Çantası
- L-Bracket (Magnetic Mounting Bracket)
- 4 x AA Qələvi Batareyalar
- Laser Target Plate (if included, often a small white plate)
- İstifadəçi Təlimatı (bu sənəd)
Şəkil 1: Contents of the STANLEY FATMAX FMHT77586-1 package, including the laser level, carrying pouch, L-bracket, and batteries.
4. Məhsul bitdiview
The STANLEY FATMAX FMHT77586-1 is a robust and accurate cross line laser level designed for professional and DIY applications. Key features include:
- Green Laser Diode: Utilizes a 510-530 Nm Class 2 green laser for enhanced visibility.
- Wide Cross Line Projection: Projects a 150° wide cross line, offering extensive surface coverage.
- Self-Leveling System: Automatically levels within a 4° range in approximately 5 seconds.
- Pendulum Lock: Secures the pendulum during transport to prevent damage and allows for manual mode operation for angled lines.
- Maqnit bazası: Features a magnetic base for direct attachment to metal structures.
- Qəbuledici rejimi: A dedicated button activates receiver mode, extending the working range up to 50 meters with an optional laser receiver.
- Davamlı tikinti: Rubber-coated housing provides IP54 protection against dust and splashing water.
- Montaj Seçimləri: Equipped with 1/4" and 5/8" tripod threads for versatile mounting.
Şəkil 2: Yan profile of the laser level, showcasing its durable design.
5. Quraşdırma
5.1 Batareyanın quraşdırılması
- Locate the battery compartment cover on the back or bottom of the laser level.
- Qapağı sürüşdürərək və ya açaraq açın.
- Bölmənin içərisində göstərildiyi kimi düzgün polyarlığı (+/-) təmin edərək 4 ədəd AA qələvi batareyanı daxil edin.
- Batareya bölməsinin qapağını etibarlı şəkildə bağlayın.
5.2 Lazer səviyyəsinin quraşdırılması
The FMHT77586-1 offers several mounting options:
- Düz Səth: Place the laser level directly on a stable, flat surface.
- Tripodun quraşdırılması: Attach the laser level to a tripod using the 1/4" or 5/8" thread on the bottom of the unit.
- Maqnetik montaj: Use the included L-bracket to attach the laser level to metal surfaces. The L-bracket has strong magnets for secure attachment.
Şəkil 3: Laser level mounted using an L-bracket, projecting a horizontal line for alignment.
6. Əməliyyat Təlimatları
6.1 Powering On and Self-Leveling Mode
- Kilid açarını kilidsiz vəziyyətə sürüşdürərək sarkaçın kilidini açın.
- Press the power button (usually marked with a power symbol) to turn on the laser level.
- The laser level will automatically begin self-leveling. This typically takes about 5 seconds.
- Once leveled, the laser lines will emit a steady green light. If the device is outside its 4° self-leveling range, the laser lines may flash or an indicator light may illuminate, signaling that the device needs to be repositioned.
6.2 Switching Laser Modes
Press the mode button (often marked with a laser symbol or 'M') to cycle through different laser line configurations:
- Horizontal Line Only
- Vertical Line Only
- Cross Line (Horizontal and Vertical)
Şəkil 4: Interacting with the control panel to select laser modes.
6.3 Əl ilə idarəetmə rejimi (Kilidli sarkaç)
To project angled lines, keep the pendulum locked. When the pendulum is locked, the self-leveling function is deactivated, and the laser lines can be projected at any angle. The laser lines may flash to indicate that it is in manual mode and not self-leveling.
6.4 Qəbuledici Rejimi
For outdoor use or in bright conditions, activate receiver mode by pressing the dedicated receiver button (often marked with a signal icon). This increases the pulse rate of the laser, allowing it to be detected by an optional laser receiver for extended range (up to 50m). An indicator light will typically confirm receiver mode is active.
Şəkil 5: Laser level in operation, projecting precise green cross lines for measurement.
6.5 Enerjinin söndürülməsi
To turn off the laser level, press the power button again. Always engage the pendulum lock before storing or transporting the device to protect the internal mechanism.
7. Baxım
- Təmizləmə: Wipe the laser level with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the laser apertures are clean for optimal beam clarity.
- Yaddaş: Store the device in its carrying pouch in a dry, cool place, away from direct sunlight. Always engage the pendulum lock before storage.
- Batareyaya qulluq: Remove batteries if the device will not be used for an extended period to prevent corrosion from battery leakage.
- Kalibrləmə yoxlanışı: Periodically check the calibration of your laser level. Refer to the full product manual or STANLEY FATMAX support for detailed calibration procedures if needed.
8. Giderme
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Lazer xətləri solğun və ya görünməzdir. | Low batteries; dirty laser aperture; too much ambient light. | Replace batteries; clean laser aperture; use in lower light conditions or activate receiver mode with an optional receiver. |
| Lazer xətləri yanıb-sönür. | Device is outside its self-leveling range; pendulum is locked (manual mode). | Reposition the device on a more level surface; unlock the pendulum for self-leveling mode. |
| Cihaz işə düşmür. | Batteries are dead or incorrectly installed; pendulum lock is engaged. | Replace batteries and check polarity; ensure pendulum is unlocked (for self-leveling mode). |
| Qeyri-dəqiq ölçmələr. | Device is not level; calibration issue; unstable surface. | Ensure the device is within its self-leveling range; check calibration; place on a stable surface. |
9. Spesifikasiyalar
| Xüsusiyyət | Detal |
|---|---|
| Model nömrəsi | FMHT77586-1 |
| Lazer növü | Green Diode Laser (510 - 530 Nm) |
| Lazer sinfi | 2-ci sinif |
| İş diapazonu | 30 m (50 m with receiver) |
| Dəqiqlik | 3 m-də ±10 mm |
| Özünü düzəldən sıra | ±4° |
| Özünü düzəldən vaxt | 5 saniyə |
| Güc mənbəyi | 4 x AA Qələvi Batareyalar |
| Batareya Ömrü | Approx. 5 hours (single line operation) |
| Giriş Mühafizəsi | IP54 (Toz və sıçrama suyu qorunur) |
| Montaj ipi | 1/4" və 5/8" |
| Ölçülər (U x G x Y) | 20 x 16 x 16 sm (təxminən) |
| Çəki | 1 kq (təxmini) |
| İş rejimi | Automatic (Self-leveling) |
| Material | Rubber, Magnetic |
10. Zəmanət və Dəstək
STANLEY FATMAX products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official STANLEY FATMAX websayt. Satınalma qəbzini alışın sübutu olaraq saxlayın.
For further assistance, please contact STANLEY FATMAX customer service.
