1. Giriş
The Finder 80.01.0.240.0000 is a versatile modular multi-function and multi-voltage time delay relay from the 80 Series. This device is designed for precise timing control in various industrial and domestic applications, featuring a 16A Single Pole Double Throw (SPDT) output contact. Its modular design allows for easy integration into electrical panels.
2. Məhsulun xüsusiyyətləri
- Modular Multi-function Time Delay
- Suitable for Timing Alternating & Sequencing Relay applications
- Çoxcildlitage operation (12...240V AC/DC)
- 16A SPDT output contact
- Five selectable timing functions
3. Təhlükəsizlik Məlumatı
Please read and understand all instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or serious injury. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.
- Quraşdırmadan, naqillərdən və ya texniki xidmətdən əvvəl həmişə elektrik enerjisini ayırın.
- Təchizat həcmini təmin edintage cihazın xüsusiyyətlərinə uyğundur.
- Do not exceed the maximum current rating of the output contacts.
- Cihazı nəmdən, tozdan və həddindən artıq temperaturdan qoruyun.
4. Quraşdırma və Quraşdırma
The Finder 80.01.0.240.0000 timer is designed for DIN rail mounting. Ensure the mounting location is stable, free from vibrations, and provides adequate ventilation.
4.1. Montaj
- Securely attach the timer to a standard 35mm DIN rail.
- Ensure sufficient space around the device for wiring and heat dissipation.
4.2. məftil
Refer to the wiring diagram below and the markings on the device for correct connections. Use appropriate wire gauges for the current and voltage reytinqlər.
Şəkil 1: Finder 80.01.0.240.0000 Modular Timer. This image displays the Finder 80.01.0.240.0000 modular timer. Visible elements include the power supply terminals A1 and A2 at the top, a control input B1, and output contacts 15, 16, and 18 at the bottom. The front panel features a time setting dial marked 'T' with values from 1 to 20, and a function selector dial labeled 'AI'. The operating voltage range 'Un 12...240V' and contact rating '16A 250V~' are also indicated.
- A1, A2: Power Supply Terminals (Un 12...240V AC/DC). Connect the control voltage burada.
- B1: Control Input. This terminal is used for specific timing functions (e.g., start/reset).
- 15: Common Contact for the SPDT output relay.
- 16: Normally Closed (NC) Contact. This contact is closed when the relay is de-energized and open when energized.
- 18: Normally Open (NO) Contact. This contact is open when the relay is de-energized and closed when energized.
5. Əməliyyat Təlimatları
The timer features two rotary dials on the front panel for setting the timing function and the time delay value.
5.1. Funksiya seçimi
The lower rotary dial, labeled 'AI' (as seen in Figure 1), is used to select one of the five available timing functions. Refer to the product's detailed datasheet for a complete description of each function (e.g., ON-delay, OFF-delay, Flasher, etc.). Rotate the dial to align the desired function symbol with the indicator mark.
5.2. Saat Ayarı
The upper rotary dial, labeled 'T' (as seen in Figure 1), is used to set the time delay value. The dial typically has a range (e.g., 1 to 20 seconds, minutes, or hours) and a multiplier (e.g., '2s' for 2 seconds). Rotate the dial to the desired time value. The specific time range and multiplier depend on the model variant and selected function.
6. Baxım
The Finder 80.01.0.240.0000 timer is designed for long-term, maintenance-free operation under normal conditions.
- Təmizləmə: If necessary, gently clean the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Yoxlama: Periodically inspect wiring connections for tightness and signs of wear or corrosion.
- Ətraf mühit: İş mühitinin müəyyən edilmiş temperatur və rütubət aralığında qalmasını təmin edin.
7. Giderme
If the timer is not functioning as expected, consider the following common issues:
- Güc yoxdur: Check the power supply to terminals A1 and A2. Ensure the voltage is within the specified range (12...240V AC/DC).
- Yanlış naqil: Verify all connections against the wiring diagram. Ensure terminals 15, 16, and 18 are correctly connected to the load.
- Function/Time Setting: Confirm that the desired timing function and time delay are correctly set using the front panel dials.
- Control Input (B1): If using a control input, ensure it is correctly wired and receiving the expected signal.
- Həddindən artıq yükləmə: Check if the load connected to the output contacts exceeds the 16A rating.
If problems persist, contact Finder technical support or a qualified electrician.
8. Spesifikasiyalar
| Atribut | Dəyər |
|---|---|
| Brend | Tapıcı |
| Model nömrəsi | 80.01.0.240.0000 |
| Material | Plastik, qatran |
| Əməliyyat Voltage (Un) | 12...240V AC/DC |
| Çıxış Əlaqə Reytinqi | 16A 250V~ (SPDT) |
| Parametrlərin sayı | 5 (timing functions) |
| Maddə Çəkisi | 4.54 q (0.16 unsiya) |
| Paket Ölçüləri | 5 x 5 x 4 düym |
| UPC | 758449164462 |
| İstehsalçı | Tapıcı |
| İlk Əlçatan Tarix | 18 iyun 2020-cü il |
9. Zəmanət və Dəstək
Zəmanət məlumatı və texniki dəstək üçün rəsmi Finder-ə müraciət edin website or contact your authorized Finder distributor. Keep your purchase receipt for warranty claims.
İstehsalçı: Tapıcı
Websayt: www.finder-relays.com (Zəhmət olmasa, rəsmi məlumatı təsdiqləyin website for your region)
