Orient MBSSC064 Men's Chronograph Watch

Giriş

Thank you for choosing the Orient MBSSC064 Men's Chronograph Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

Məhsul Bitdiview

The Orient MBSSC064 is a sophisticated men's chronograph watch featuring a stainless steel case and bracelet, a black dial, and a mineral crystal. It is designed for durability and precision.

Image: Orient MBSSC064 Men's Chronograph Watch, front view. This image displays the watch's black dial, silver-tone stainless steel case and bracelet, and chronograph sub-dials.

Komponentlər:

• Tac: Vaxt və tarix təyin etmək üçün istifadə olunur.
• İtələyicilər (A və B): Xronoqraf funksiyalarını idarə etmək üçün istifadə olunur.
• Əsas yığım: Saatları, dəqiqələri və saniyələri göstərir.
• Alt zənglər: Typically for chronograph minutes, seconds, and 24-hour display (specific functions may vary).
• Tarix pəncərəsi: Cari tarixi göstərir.
• Stainless Steel Bracelet: Durable and adjustable for wrist comfort.

Quraşdırma

Vaxtın təyin edilməsi:

1. Tacı ikinci klik vəziyyətinə çəkin. Sekund dayanacaq.
2. Rotate the crown to set the hour and minute hands. Ensure the AM/PM is correctly set if your watch has a 24-hour indicator or date changes at midnight.
3. Push the crown back into the normal position. The second hand will resume movement.

Tarixin təyin edilməsi:

1. Tacı ilk klik mövqeyinə çəkin.
2. Rotate the crown to set the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
3. Tacı normal vəziyyətə qaytarın.

Xronoqrafın işlədilməsi

Xronoqraf funksiyası əsas vaxt ekranından asılı olmayaraq keçən vaxtı ölçməyə imkan verir.

1. Başlayın: Press pusher A (top pusher) to start the chronograph. The chronograph second hand will begin to move.
2. Dayan: Press pusher A again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
3. Sıfırlayın: After stopping, press pusher B (bottom pusher) to reset the chronograph hands to their zero positions.
4. Bölünmüş Vaxt (əgər varsa): Some chronographs allow for split time measurement. Refer to specific movement instructions if this feature is present.

Note: Do not operate the pushers while the watch is wet or submerged in water, as this can compromise water resistance.

Baxım

Təmizləmə:

Wipe the watch case and bracelet regularly with a soft, dry cloth to remove dirt and perspiration. For stainless steel, a slightly damp parça istifadə edilə bilər, sonra quru bir parça. Kimyəvi təmizləyicilərdən və ya aşındırıcı materiallardan istifadə etməyin.

Water Resistance (100 Meters / 10 ATM):

Your Orient MBSSC064 watch is water-resistant up to 100 meters (10 ATM). This means it is suitable for swimming, snorkeling, and showering. However, it is yox suitable for high-impact water sports, diving, or prolonged submersion at depths beyond its rating.

• Su ilə hər hansı təmas etməzdən əvvəl tacın tam içəri itələndiyinə əmin olun.
• Saat yaş və ya su altında olarkən tacı və ya itələyiciləri işlətməyin.
• Avoid exposing the watch to extreme temperature changes (e.g., hot shower immediately followed by cold water), as this can affect seals.
• Have the water resistance seals checked periodically (e.g., every 2-3 years) by an authorized service center.

Batareyanın dəyişdirilməsi:

When the battery needs replacement, the second hand may start moving in two-second intervals (End-of-Life indicator). Battery replacement should only be performed by an authorized Orient service center or a qualified watchmaker to maintain water resistance and prevent damage to the movement.

Problemlərin aradan qaldırılması

• "İşləməyən" saatı: Check if the crown is fully pushed in. If it's a new watch, ensure any plastic battery stopper has been removed. If the watch has stopped, the battery may need replacement.
• Yanlış Vaxt/Tarix: Refer to the "Setting the Time" and "Setting the Date" sections. Ensure the crown is fully pushed in after setting.
• Xronoqraf Sıfıra Sıfırlanmır: This may require a chronograph hand reset procedure. Consult an authorized service center if the issue persists after following basic operating instructions.
• Condensation Inside Crystal: If you notice condensation under the crystal, this indicates a loss of water resistance. Immediately take the watch to an authorized service center to prevent further damage.

Spesifikasiyalar

Zəmanət və Dəstək

Your Orient MBSSC064 watch comes with a 12 ay zəmanət from the date of purchase, covering manufacturing defects. This warranty does not cover normal wear and tear, accidental damage, or damage resulting from improper use or unauthorized repairs.

For warranty claims, service, or technical support, please contact your authorized Orient dealer or an official Orient service center. Attempting to repair the watch yourself will void the warranty.