Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Giriş

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Təhlükəsizlik Məlumatı

• Quraşdırma və istismardan əvvəl bütün təlimatları diqqətlə oxuyun.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Cihazı uşaqların əli çatmayan yerdə saxlayın.

3. Paketin məzmunu

Bütün əşyaların paketdə olduğunu yoxlayın:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x montaj braketi
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Məhsul bitdiview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Şəkil 1: Ön view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Əsas komponentlər:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED Göstərici: Provides status feedback (e.g., detection, low battery).
• Batareya bölməsi: Houses the power source.
• Montaj Nöqtələri: For secure installation on a wall.
• Tamper keçid: Triggers an alarm if the sensor cover is opened.

5. Quraşdırma

5.1. Batareyanın quraşdırılması

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Sensorun quraşdırılması

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Divarda vida yerlərini qeyd etmək üçün montaj braketindən şablon kimi istifadə edin.
3. İşarələnmiş mövqelərdə deliklər qazın və divar tıxaclarını daxil edin.
4. Təqdim olunan vintlərdən istifadə edərək montaj braketini divara bərkidin.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Sensorun İşlədilməsi

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED Göstərici Vəziyyəti

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• İşıq yoxdur: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Baxım

7.1. Təmizləmə

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Batareyanın dəyişdirilməsi

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Daimi Yoxlamalar

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Giderme

9. Spesifikasiyalar

• Brend: İntelbras
• Model: IVP2000SF
• Güc mənbəyi: Batareya ilə işləyir
• Batareya növü: Qələvi
• Montaj növü: Divar montajı
• Uyğun Cihazlar: Intelbras security systems and smart home hubs
• Məhsul Ölçüləri: Təxminən 17 x 10 x 9 sm (6.7 x 3.9 x 3.5 düym)
• Aşkarlama üsulu: Passiv İnfraqırmızı (PIR)
• Aşkarlama Aralığı: 12 metrə qədər (39 fut)
• Aşkarlama bucağı: Təxminən 90 dərəcə
• Əməliyyat mühiti: Yalnız daxili istifadə

10. Zəmanət Məlumatı

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras websaytına daxil olun və ya müştəri dəstəyi ilə əlaqə saxlayın. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.

11. Dəstək

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Websayt: Visit the official Intelbras webdəstək resursları, tez-tez verilən suallar və əlaqə məlumatları üçün sayt.
• Telefon: Refer to the contact section on the Intelbras webyerli dəstək nömrələri üçün sayt.