KeylessOption EZSDEI7141 474V

KeylessOption Keyless Entry Remote Starter Car Key Fob User Manual

Model: EZSDEI7141 474V

Giriş

This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.

Ön view of the KeylessOption Key Fob with lock, unlock, AUX, and star buttons.

Şəkil: Ön view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.

Quraşdırma və Proqramlaşdırma

Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.

Proqramlaşdırma addımları:

  1. Open the driver's side door of your vehicle.
  2. Insert the key into the ignition and turn it to the ON position. Do not start the engine.
  3. Locate the Viper system's control button (often a small button with a blue LED indicator).
  4. İdarəetmə düyməsini basın yeddi dəfə. Üzərində eighth press, hold the button down until the car chirps.
  5. While still holding the control button, press the Kilidləyin button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
  6. Nəzarət düyməsini buraxın.
  7. Kontaktı açara çevirin OFF yerləşdirin və çıxarın.
  8. Close the driver's side door.
  9. Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.

If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.

Video: Qısacaview of KeylessOption Key Fob Remotes for Viper systems.

Əməliyyat Təlimatları

Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:

Bucaqlı view of the KeylessOption Key Fob, showing the side profile and button layout.

Şəkil: Bucaqlı view of the KeylessOption Key Fob, highlighting its ergonomic design.

Baxım

Batareyanın dəyişdirilməsi:

If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:

  1. Carefully separate the two halves of the remote casinkiçik yastı başlıqlı tornavida və ya əyici alət istifadə edərək.
  2. Remove the old battery. Note its orientation (+/- sides).
  3. Insert the new battery with the correct orientation.
  4. Pultu c-yə qoşunasing təhlükəsiz şəkildə yenidən birlikdə.
Geri view of the KeylessOption Key Fob, showing the smooth casing.

Şəkil: Geri view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.

Problemlərin aradan qaldırılması

Spesifikasiyalar

BrendAçarsız Seçim
Model nömrəsiEZSDEI7141 474V
Uyğun CihazlarViper Aftermarket Alarm System
FCC IDEZSDEI7141
Düymələrin sayı4 (Lock, Unlock, Aux, Panic)
Maddə Çəkisi0.634 unsiya
Paket Ölçüləri6.77 x 4.65 x 0.47 düym

Zəmanət və Dəstək

Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption websayt.

KeylessOption Zəmanət Kartı

Image: KeylessOption Warranty Card, included with each purchase.

Əlaqədar Sənədlər - EZSDEI7141 474V

Preview Directed 474T 1-Way 4-Button Remote Control
Replacement 1-Way 4-Button Remote Control for Directed systems and compatible Avital, Clifford, and other brands. Features include CR2032 battery, 434Mhz frequency, and 1/4-mile range.
Preview Remote Control Compatibility and Replacement Guide
A comprehensive reference guide detailing remote control models, part numbers, date codes, and compatible replacement remotes across various brands including Automate, Clifford, Viper, and many others. Includes a section for FCC ID cross-referencing.