1. Giriş
The Midas MICROPHONE PREAMPLIFIER 502 is a high-performance, compact 500 Series premium microphone/line preamplifier. It incorporates award-winning Midas amplifier technology, enhanced with quad discrete ultra low noise input transistors, delivering exceptional audio fidelity.
This module features the legendary Midas input, allowing signal levels up to +24 dBu without the need for a pad, while maintaining its much-loved soft clipping characteristic. It also includes classic Midas XL4 swept low and high pass filters with independent selection switches, providing precise tonal shaping. A switchable twin aux balanced output offers mic/line splitter capability when installed in compatible Midas L6 or L10 racks.

Şəkil 1.1: Ön view of the Midas MICROPHONE PREAMPLIFIER 502, highlighting its input, gain, filter, and output controls.
2. Əhəmiyyətli Təhlükəsizlik Təlimatları
Please read these instructions carefully before operating your Midas MICROPHONE PREAMPLIFIER 502. Keep this manual for future reference.
- Bu cihazı yağışa və ya nəmə məruz qoymayın.
- Heç bir ventilyasiya açılışını bağlamayın. İstehsalçının göstərişlərinə uyğun olaraq quraşdırın.
- Radiatorlar, istilik registrləri, sobalar və ya digər aparatlar (o cümlədən) kimi istilik mənbələrinin yaxınlığında quraşdırmayın. ampistilik əmələ gətirən qaldırıcılar).
- Yalnız istehsalçı tərəfindən göstərilən qoşmalardan/aksesuarlardan istifadə edin.
- Bütün xidmətlər üçün ixtisaslı xidmət personalına müraciət edin. Aparat hər hansı şəkildə zədələndikdə, məsələn, enerji təchizatı kabeli və ya tıxacı zədələndikdə, maye töküldükdə və ya cihazın içərisinə əşyalar düşdükdə, cihaz yağışa və ya nəmə məruz qaldıqda, normal işləmədikdə xidmət tələb olunur. , ya da atılıb.
- This product is designed for professional audio applications and should be installed by qualified personnel.
3. Qutuda nə var
Upon unpacking your Midas MICROPHONE PREAMPLIFIER 502, please ensure all components are present and in good condition:
- Midas MICROPHONE PREAMPLIFIER 502 module
- Tez Başlanğıc Bələdçisi / Təhlükəsizlik Məlumatı
- Zəmanət Qeydiyyat Kartı
Hər hansı bir əşya əskik və ya zədələnmişsə, dərhal dilerinizlə əlaqə saxlayın.
4. Quraşdırma
The Midas MICROPHONE PREAMPLIFIER 502 is a 500 Series module designed to be installed into a compatible 500 Series rack or chassis (e.g., Midas L6 or L10 racks).
4.1 Installation into a 500 Series Rack
- Ensure your 500 Series rack is powered off and disconnected from the mains supply.
- Carefully align the edge connector of the 502 module with an available slot in your 500 Series rack.
- Gently but firmly push the module into the slot until it is fully seated. Do not force the module.
- Secure the module to the rack using the provided screws (typically two per module) through the faceplate.
- Once all modules are installed, reconnect your 500 Series rack to the mains supply and power it on.

Şəkil 4.1: Bucaqlı view of the Midas MICROPHONE PREAMPLIFIER 502, illustrating its form factor for 500 Series rack installation.
4.2 Səs əlaqələri
The 502 module receives its input and sends its output via the 500 Series rack's backplane connections. Refer to your 500 Series rack's manual for specific input/output patching details.
- Microphone/Line Input: Connect your microphone or line-level source to the corresponding input on your 500 Series rack's rear panel.
- Çıxış: Connect the output of your 500 Series rack to your mixing console, audio interface, or other processing equipment.
- Aux Output (if applicable): If using a Midas L6 or L10 rack, the switchable twin aux balanced output provides additional routing flexibility.
5. Operating the Midas 502
The Midas 502 offers intuitive controls for precise microphone and line-level signal conditioning.
5.1 Ön Panel İdarəetmələri
- INPUT (Rotary Knob): Adjusts the input level of the signal. The meter above indicates the input signal level.
- GAIN (Rotary Knob): məbləğinə nəzarət edir amplification applied to the input signal.
- LOW PASS (Rotary Knob): Swept low pass filter control, allowing you to cut high frequencies. Range: 3 kHz to 15 kHz.
- HIGH PASS (Rotary Knob): Swept high pass filter control, allowing you to cut low frequencies. Range: 10 Hz to 400 Hz.
- TRIM (Rotary Knob): Fine-tunes the output level of the preamplifier. The meter above indicates the output signal level.
- 48V (Button): Engages +48V phantom power for condenser microphones. An indicator light illuminates when active.
- IN (Button - Phase): Inverts the phase of the input signal (180 degrees). An indicator light illuminates when active.
- IN (Button - Filter Bypass): Bypasses the low and high pass filters. An indicator light illuminates when active.
- TX (Button): Activates the transformer output, providing a distinct sonic character. An indicator light illuminates when active.
- Mic/Line (Switch): Selects between microphone and line-level input impedance and gain staging.

Şəkil 5.1: Ətraflı view of the Midas MICROPHONE PREAMPLIFIER 502 front panel controls.
5.2 Əsas Əməliyyat İş Axını
- Connect your microphone or line source to the appropriate input on your 500 Series rack.
- təyin edin Mikrofon/Xətt switch according to your source.
- If using a condenser microphone, engage the 48V fantom güc.
- ilə başlayın QAZAN və GİRİŞ knobs at their minimum settings.
- Tədricən artırın QAZAN until you achieve a healthy signal level on the input meter, avoiding clipping.
- tənzimləyin Aşağı keçid və Yüksək keçid filters as needed to shape the tone and remove unwanted frequencies.
- istifadə edin IN (Phase) button if phase correction is required.
- Cəlb edin TX button for transformer coloration if desired.
- istifadə edin Kəsmək knob to fine-tune the output level to your next device in the signal chain.
6. Baxım
The Midas MICROPHONE PREAMPLIFIER 502 is designed for reliable operation with minimal maintenance.
- Təmizləmə: Cihazın xarici hissəsini təmizləmək üçün yumşaq, quru parça istifadə edin. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən istifadə etməyin.
- Havalandırma: Ensure that the ventilation slots on your 500 Series rack are not obstructed to prevent overheating.
- Yaddaş: When not in use for extended periods, store the module in a cool, dry place, ideally within its original packaging or a protective case.
7. Giderme
If you encounter issues with your Midas MICROPHONE PREAMPLIFIER 502, refer to the following common troubleshooting steps:
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Audio çıxış yoxdur |
|
|
| Təhrif olunmuş səs |
|
|
| Vuruş və ya səs-küy |
|
|
If the problem persists after trying these steps, please contact Midas customer support or an authorized service center.
8. Spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Maddə Çəkisi | 8.25 funt (3.74 kq) |
| Məhsulun Ölçüləri (U x G x Y) | 6.85 x 1.5 x 5.2 düym (17.4 x 3.8 x 13.2 sm) |
| Model nömrəsi | MİKROFON ÖNCƏSİAMPLİFIER 502 |
| Giriş növü | Microphone / Line |
| Phantom Gücü | +48V Dəyişdirilə bilən |
| Filtrlər | Classic XL4 Swept Low Pass (3k-15k), High Pass (10Hz-400Hz) |
| Çıxış | Standard 500 Series Output, Switchable Twin Aux Balanced Output (with compatible racks) |
| İlk Mövcud Tarix | 3 yanvar 2020-cü il |

Şəkil 8.1: Arxa view of the Midas MICROPHONE PREAMPLIFIER 502, displaying manufacturing and serial information.
9. Zəmanət və Dəstək
Midas products are built to the highest standards and come with a limited warranty. Please refer to the warranty card included with your product or visit the official Midas webətraflı zəmanət şərtləri üçün sayt.
For technical support, service, or spare parts, please contact your authorized Midas dealer or visit the Midas support page online. When contacting support, please have your product model number (MICROPHONE PREAMPLIFIER 502) and serial number ready.
Official Midas Websayt: www.midasconsoles.com





