Phanteks Evolv X2 Mid-Tower Oyun Şassisi İstifadəçi Təlimatı

Giriş

This manual provides detailed instructions for the Phanteks Evolv X2 Mid-Tower Gaming Chassis. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance of your system.

Şəkil: Ön tərəf view of the Phanteks Evolv X2 Mid-Tower Gaming Chassis, showcasing its tempered glass panels and internal structure.

Paketin məzmunu

Quraşdırmaya davam etməzdən əvvəl bütün komponentlərin mövcud olduğunu yoxlayın:

• Phanteks Evolv X2 Chassis
• Accessory Box (screws, zip ties, manual)
• D-RGB Lighting Cables
• Əlavə montaj aparatı

Quraşdırma və Quraşdırma

Follow these steps for proper installation of your components into the Phanteks Evolv X2 chassis.

1. Şassinin hazırlanması

Carefully remove the tempered glass panels. Refer to the accessory box for specific instructions on panel removal to prevent damage.

Şəkil: Daxili view of the Phanteks Evolv X2 chassis, showing the spacious layout for component installation.

2. Ana platanın quraşdırılması

The Evolv X2 supports ATX, Micro ATX, and Mini ITX motherboards. Install standoffs as required for your motherboard form factor. Secure the motherboard using the provided screws.

This chassis also supports ATX rear-connect mainboards, which can simplify cable management by routing connections to the rear of the motherboard tray.

Image: Close-up of the motherboard tray within the Phanteks Evolv X2, highlighting mounting points and cable routing options.

3. Enerji təchizatının quraşdırılması

The power supply unit (PSU) is mounted at the front of the chassis. Secure the PSU using the provided screws.

4. Saxlama Diskinin Quraşdırılması

Install your 2.5-inch and 3.5-inch storage drives into the designated bays. Refer to the accessory box for specific mounting hardware and locations.

5. Soyutma Sisteminin Konfiqurasiyası

The Evolv X2 features a vertical cooling system designed for optimal airflow. It supports:

• Bottom Intake: Triple 120mm fan positions for air intake.
• Top Exhaust: Triple 120mm fan positions with dedicated 360mm radiator clearance for exhaust.
• Arxa egzoz: One 120mm fan position.

Ensure fans are oriented correctly for intake and exhaust to maintain efficient airflow.

Şəkil: View of the bottom fan mounting positions in the Phanteks Evolv X2, designed for air intake.

Şəkil: Üst view of the Phanteks Evolv X2, showing the fan and radiator mounting area for exhaust.

Image: Diagram illustrating the vertical airflow path within the Phanteks Evolv X2 chassis, with air entering from the bottom and exiting from the top.

6. Qrafik kartın quraşdırılması

Install your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely fastened. The chassis provides ample space for high-end GPUs up to 380mm in length.

Şəkil: Daxili view of the Phanteks Evolv X2, showcasing a graphics card installed and integrated D-RGB lighting.

7. Kabel idarəetməsi

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. The design supports ATX rear-connect mainboards for a cleaner setup.

Image: A fully assembled Phanteks Evolv X2 system demonstrating effective cable management and component layout.

8. D-RGB Lighting Connection

Connect the integrated D-RGB lighting cables to your motherboard's D-RGB header or a compatible D-RGB controller. Refer to your motherboard manual for specific D-RGB header locations.

Əməliyyat Təlimatları

Once all components are installed and connected, replace the tempered glass panels. Connect your peripherals and power cable, then power on your system.

The integrated D-RGB lighting can be controlled via compatible motherboard software or an external D-RGB controller, allowing for customization of lighting effects and colors.

Baxım

Regular maintenance helps ensure the longevity and performance of your chassis and components.

• Toz Filtrləri: Periodically clean the dust filters located at the intake points (e.g., bottom of the chassis) to maintain optimal airflow and prevent dust buildup inside the system.
• Temperli Şüşə Panellər: Clean the tempered glass panels with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the glass or coatings.
• Daxili Təmizlik: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

Problemlərin aradan qaldırılması

Bu bölmə qarşılaşa biləcəyiniz ümumi problemlərə toxunur.

• Sistem işə düşmür:
  • Verify all power cables are securely connected to the motherboard, graphics card, and power supply.
  • Enerji təchizatı açarının "ON" vəziyyətində olduğundan əmin olun.
  • Check front panel header connections to the motherboard (Power SW, Reset SW).
• D-RGB İşıqlandırma İşləmir:
  • Confirm D-RGB cables are correctly connected to the motherboard's D-RGB header or a dedicated controller.
  • Ensure D-RGB software (if applicable) is installed and configured correctly.
• Zəif hava axını/yüksək temperatur:
  • Check fan orientation; intake fans should draw air in, exhaust fans should push air out.
  • Toz filtrlərini və daxili hissələri təmizləyin.
  • Ensure no cables are obstructing airflow paths.

Spesifikasiyalar

Zəmanət Məlumatı

For detailed warranty information regarding your Phanteks Evolv X2 chassis, please refer to the official Phanteks websaytına və ya məhsulunuzla birlikdə verilən zəmanət kartına baxın. Zəmanət şərtləri və qaydaları regiona görə dəyişə bilər.

Dəstək

If you require further assistance or have questions not covered in this manual, please visit the official Phanteks support webTez-tez verilən suallar, sürücülər və əlaqə məlumatları üçün sayt.

Phanteks Dəstəyi ziyarət edin