1. Giriş
This manual provides essential instructions for the installation, operation, and maintenance of your Ring Plug-In Adapter (2nd Generation). This adapter is designed to provide continuous power to compatible Ring Battery Doorbells, eliminating the need for frequent battery recharging and enabling 24/7 power and protection without existing doorbell wiring.
2. Təhlükəsizlik Məlumatı
Please read and understand all safety instructions before installing and using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- This adapter is designed for yalnız daxili istifadə. Do not expose it to water, moisture, or extreme temperatures.
- Connect the adapter only to standard indoor power outlets (100-240V AC, 50/60Hz).
- The adapter includes built-in short circuit protection. However, ensure proper wiring connections to prevent damage to the device or doorbell.
- Adapteri açmağa və ya dəyişdirməyə çalışmayın. Bütün xidmət işlərini ixtisaslı mütəxəssislərə həvalə edin.
- Uşaqların əli çatmayan yerdə saxlayın.
3. Paketin məzmunu
- Ring Plug-In Adapter (2nd Generation)
- 10-foot cable with fork connectors
4. Quraşdırma və Quraşdırma
Follow these steps to install your Ring Plug-In Adapter:
- Prepare Your Doorbell: Ensure your compatible Ring Battery Doorbell has its rechargeable Quick Release Battery Pack inserted. The adapter will keep this battery charged.
- Connect the Adapter Cable: Locate the two terminal screws on the back of your Ring Doorbell. Connect the fork connectors of the adapter's 10-foot cable to these screws. It does not matter which wire (red or black) connects to which terminal, as long as they do not touch each other. Tighten the screws to secure the connections.
Şəkil 1: Ön view of the Ring Plug-In Adapter (2nd Generation). This image shows the compact white adapter unit with the Ring logo on the side and the power cable extending from the bottom.
- Kabel marşrutu: Carefully route the 10-foot cable from your doorbell to a standard indoor power outlet. Ensure the cable is not pinched or damaged, especially if passing through door frames or walls. Use the included clips to secure the cable if needed.
- Enerjiyə qoşulun: Plug the Ring Plug-In Adapter into a standard indoor electrical outlet.
Şəkil 2: Geri view of the Ring Plug-In Adapter (2nd Generation) with its electrical specifications label. The label details the model number, input/output power, and regulatory marks.
- Bağlantını yoxlayın: Your Ring Doorbell should power on, and the Ring app should indicate a "Hardwired" status in the Device Health section. If the doorbell's light changes to a permanent white color, it indicates a successful power connection.
5. Əməliyyat
Once installed, the Ring Plug-In Adapter provides continuous power to your compatible Ring Battery Doorbell. This means your doorbell will remain powered without requiring you to remove the battery for recharging.
The adapter utilizes a trickle charge mechanism. This means it will slowly and continuously recharge the battery. It is normal for the battery percentage in the Ring app to fluctuate or drop slightly (e.g., to 90%) before the adapter initiates a recharge cycle. This behavior is designed to prolong the overall lifespan of your doorbell's battery.
6. Uyğunluq
The Ring Plug-In Adapter (2nd Generation) is compatible with the following Ring Doorbell models:
- Video qapı zəngi simli
- Video Doorbell (1st Generation)
- Video Doorbell (2nd Generation - 2020 Release)
- Video Qapı Zəngi 2
- Video Qapı Zəngi 3
- Video qapı zəngi 3 plus
- Video Qapı Zəngi 4
- Batareya Qapı Zəngi
- Batareya Qapı Zəngi Plus
- Video Qapı Zəngi Pro
- Video Doorbell Pro 2
Uyğun deyil:
- Göz çuxur kamerası
- Video qapı zəngi
7. Giderme
- Doorbell not showing "Hardwired" in app: During the initial setup tutorial, the doorbell might not immediately recognize the hardwired power source. If this occurs, proceed with the setup. Once the doorbell is fully set up, check the "Device Health" section in the Ring app; it should then correctly display "Hardwired."
- Batareya faizitage dropping: As explained in the Operation section, the adapter uses a trickle charge. It is normal for the battery percentage to drop to around 90% before the adapter recharges it back to full. This is a protective measure for battery longevity.
- No power to doorbell:
- Ensure the adapter is securely plugged into a working indoor outlet.
- Verify that the cable connections to the doorbell terminals are secure and not loose.
- Check for any visible damage to the cable or adapter.
8. Spesifikasiyalar
| Model | DBA-12PF16-24 |
| Güc Girişi | 100-240V AC, 50/60Hz, 0.5A |
| Güc Çıxışı | 24V DC, 0.5A, 12.0W |
| Kabel uzunluğu | 10 fut (təxminən 3 metr) |
| Ölçülər (Adapter Bloku) | 2.8 düym (7 sm) x 2.2 düym (5.5 sm) x 1.5 düym (3.7 sm) |
| Qoruma | Quraşdırılmış qısa qapanma mühafizəsi |
| Ətraf mühit | Yalnız daxili istifadə |
9. Zəmanət və Dəstək
Zəmanət məlumatı, texniki dəstək və ya əlavə yardım üçün rəsmi Ring dəstəyinə müraciət edin websaytına daxil olun və ya Ring müştəri xidmətləri ilə əlaqə saxlayın. Ətraflı məlumatı adətən Ring saytında tapa bilərsiniz website or within your Ring app.
Siz də ziyarət edə bilərsiniz Ring Store on Amazon əlavə məhsul məlumatı və resursları üçün.
