1. Məhsul bitdiview
This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 7 Inch Touchscreen Monitor, Model RC070S. Please read thoroughly before use.
Model: RC070S
Marka: ELECROW
The ELECROW 7-inch IPS touchscreen offers a 1024x600 resolution, adjustable via software to 1920x1080. It features vivid colors, a 178° viewing angle, and a durable, scratch-resistant tempered glass touch panel. Designed for plug-and-play functionality, it connects via HDMI for video and USB for power and touch control, requiring no additional drivers. It is compatible with various devices including Raspberry Pi 5/4/3B+/3B/2B+, Banana Pi, Jetson Nano, PCs, laptops, and gaming consoles. The monitor supports 5-point capacitive touch on Windows 11/10/8/7 and single-touch on Raspberry Pi and Jetson Nano. Integrated dual speakers and a 3.5mm headphone jack provide immersive audio, with adjustable volume and backlight settings.
2. Paketin məzmunu
- 1 x 7 Inch IPS Monitor
- 1 x USB to Micro USB Connector
- 1 x HD to Micro HD Connector
- 1 x USB - Mikro USB Kabel
- 1 x HD to HD Cable
- 4 x M2.5 vintlər
- 2 x M3 vintlər
- 2 x Dinamiklər
- 2 x Pro stend
- 4 x Small Copper Pillars
3. Texniki spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Ekranın Ölçüsü | 7 düym |
| Panel növü | IPS |
| Növə toxunun | 5-point Capacitive Touch |
| Qətnamə | 1024 x 600 Pixels (Software adjustable to 1920x1080) |
| Parlaqlıq | 260 cd/m² |
| Viewaçı | 178° (H) / 178° (V) |
| Yeniləmə dərəcəsi | 60Hz |
| HDMI Portları | 1 |
| USB Portları | 1 (for power and touch) |
| Audio Çıxış | 3.5mm Audio Jack, Built-in Dual Speakers |
| Giriş həcmitage | 5 volt |
| Total Power (Max) | 2.55W |
| İşləmə temperaturu | -20°C ~ 60°C |
| Saxlama temperaturu | -30°C ~ 70°C |
| Məhsul Ölçüləri | 1 x 6.5 x 4 düym |
| Maddə Çəkisi | 8.3 unsiya |
| Dəstəklənən ƏS | Windows 11/10/8/7, Raspbian, Ubuntu, Kali, Retropie, Jetson Nano |
4. Quraşdırma və Quraşdırma
4.1 General Assembly
To set up the monitor, first attach the included stands to the bottom of the display using the provided screws. Ensure the protective film is removed from the stands before assembly.
4.2 Raspberry Pi Connection
For Raspberry Pi connections, use the provided HDMI cable for video and the USB cable for power and touch functionality. For Raspberry Pi 4 and 5, use the included Micro-HDMI to HDMI adapter. No drivers are required for basic functionality.
Əhəmiyyətli: For Raspberry Pi 4, if using a system image after 2021-10-30 (e.g., Bullseye), modify dtoverlay = vc4-kms-v3d üçün dtoverlay = vc4-fkms-v3d ildə config.txt file. For Buster, comment out dtoverlay = vc4-fkms-V3D by adding a '#' at the beginning of the line.
Video 1: Step-by-step guide on how to install the 7-inch screen with a Raspberry Pi, demonstrating cable connections and initial setup.
Video 2: Instructions on how to install the Raspberry Pi board with the screen, detailing the physical mounting and connections.
4.3 PC bağlantısı
Connect the monitor to your PC or laptop using the HDMI cable for video and the USB cable for power and touch. The monitor is driver-free for Windows 11/10/8/7. Adjust display settings on your PC for optimal resolution.
5. Monitorun işlədilməsi
5.1 Toxunma funksiyası
The monitor features a 5-point capacitive touchscreen for multi-touch gestures on Windows and single-touch on Raspberry Pi and Jetson Nano. Ensure the USB cable is connected to enable touch input.
5.2 Ekranda Ekran (OSD) Menyu
The monitor includes tactile buttons on the side for navigating the OSD menu. These buttons allow adjustment of various display settings:
- Şəkil: Adjust backlight, brightness, contrast, and sharpness.
- Rəng: Modify panel uniformity, gamma, temperature, and color effects.
- Qabaqcıl: Set aspect ratio.
- Audio: Control volume and mute.
5.3 Audio Xüsusiyyətləri
The monitor is equipped with built-in dual speakers and a 3.5mm headphone jack for audio output. Digital audio output is also supported via HDMI.
6. Giderme
- Monitor not powering on: Ensure the power cable (USB-A to C) is properly plugged into both the Raspberry Pi/PC and the monitor.
- Image is reversed: The monitor does not support image flip.
- No touch functionality: Verify the USB-A to C cable is securely connected between the host device and the monitor.
- No signal on display: Ensure the HDMI cable is properly connected between the host device and the monitor. If using a mini HDMI port, ensure the correct adapter is used.
- Speakers at high volume cause issues: When speakers are at 80% or more volume, connect the power port (not touch port) to provide full power.
7. Vacib qeydlər
- The Raspberry Pi cannot be powered by powering the screen.
- Always connect the power interface when powering the screen. Supplying power through the touch interface may lead to insensitive or unusable touch functionality.
8. Zəmanət və Dəstək
ELECROW products offer a one-year warranty. For quality-related issues, you may return any undamaged product within 12 months for a refund or replacement. Shipping costs and charges are not included.
For support or inquiries, please contact ELECROW customer service:
- Websayt: www.eoyousa.com
- E-poçt: support@eyoyomonitor.com
- Telefon: 909-317-8588 (9:00 AM–5:00 PM; Monday–Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
