Giriş
This manual provides detailed instructions for the installation, setup, and operation of your SECULINK 16-Channel 4K Network Video Recorder (NVR). This NVR supports up to 16 IP cameras with resolutions up to 8MP (4K) and utilizes H.265+ compression for efficient storage. It features motion detection recording, multiple storage options, and remote access capabilities via a mobile application.
Paketin məzmunu
Aşağıda sadalanan bütün elementlərin paketinizə daxil olduğunu yoxlayın. Hər hansı bir element əskik və ya zədələnmişsə, müştəri dəstəyi ilə əlaqə saxlayın.
- 1x SECULINK 16-Channel Network Video Recorder
- 1x Enerji Adapteri
- 1x USB siçan
Note: A hard drive is not included and must be purchased separately. SECULINK recommends Seagate 3.5" SATA HDDs up to 6TB for optimal performance.
Məhsul Xüsusiyyətləri
- Ultra HD Video: Supports full 4K (8MP) video viewing and recording on all 16 channels, compatible with 8MP/5MP/4MP/3MP/1080p ONVIF IP cameras.
- H.265+ Sıxılma: Advanced video compression technology to enhance bandwidth and storage efficiency, resulting in smaller file sizes, higher definition, and longer recording times.
- Hərəkət Algılama Qeydləri: Configurable recording schedule based on detected movements, conserving storage space by recording only when activity is present.
- Birdən çox saxlama seçimi: Supports up to 6TB SATA HDD (sold separately) and Cloud Storage Service (subscription may be required). Backup options include USB flash disk, USB DVR writer, and network.
- P2P Remote Access: Cloud P2P function enables remote viewing on smartphones, tablets, and PCs via the dedicated mobile application.
Image: Visual comparison demonstrating various video resolutions supported by the NVR, from 720p up to Ultra HD 4K (8MP).
Image: A diagram showing the storage efficiency of H.265+ compression, indicating significantly reduced file sizes compared to H.264 for the same video quality.
Quraşdırma
The NVR requires a wired Ethernet connection to your router for operation. Ensure your IP cameras are also connected to the same network.
- NVR-ni qoşun: Ethernet kabelindən istifadə edərək NVR-ni marşrutlaşdırıcınıza qoşun.
- Ekranı qoşun: Connect a TV or monitor to the NVR using either the VGA or HDMI port.
- USB siçanı birləşdirin: Plug the included USB mouse into one of the USB ports on the NVR.
- Güc Aktivdir: Güc adapterini NVR-ə və sonra elektrik rozetkasına qoşun. NVR avtomatik olaraq işə düşəcək.
- İlkin Konfiqurasiya: Follow the on-screen prompts to complete the initial setup, including setting up network parameters and searching for connected IP cameras.
Şəkil: arxa view of the NVR, highlighting the VGA, HDMI, RJ45 (Ethernet), USB, and DC 12V power ports for connecting peripherals and network.
Image: A typical network setup illustrating how IP cameras connect to a router, which then connects to the NVR for recording and monitoring.
Hard Diskin quraşdırılması
A hard drive is required for local video storage. Follow these steps to install a 3.5" SATA HDD (not included).
- Unscrew the Cover: Power off the NVR and disconnect all cables. Carefully twist down the screws on the NVR casing to remove the top cover.
- Connect HDD Cables: Connect the SATA data and power cables from the NVR to the corresponding ports on your hard drive.
- Secure the HDD: Place the hard drive inside the NVR chassis and secure it using the provided screws.
- Qapağı dəyişdirin: Reattach the NVR cover and secure it with the screws.
- HDD formatı: After powering on the NVR, navigate to the storage settings in the NVR menu and format the newly installed hard drive. This prepares it for recording.
Image: Visual instructions detailing the process of installing a hard disk drive (HDD) into the NVR unit.
Əməliyyat Təlimatları
Qeyd Modu
The NVR supports various recording modes to suit your surveillance needs:
- Əllə qeyd: Əl ilə yazmağa başlayın və dayandırın.
- Hərəkət Algılama Qeydləri: The NVR records only when motion is detected by the connected cameras. This saves storage space and makes reviewing footage more efficient.
- Planlaşdırılmış Qeyd: Davamlı qeyd üçün müəyyən vaxtlar təyin edin.
- Siqnal Qeydiyyatı: Records when an alarm event is triggered (e.g., sensor input, if supported by cameras).
Image: Illustration of different recording modes: 24/7 continuous, motion-triggered, and scheduled recording.
Hərəkət Algılama və Xəbərdarlıqlar
Configure motion detection zones and sensitivity through the NVR's interface. When motion is detected, the NVR can trigger recording and send instant alert messages to your mobile devices via the XMeye app.
Image: A visual representation of smart motion detection, showing an alert message pushed to a mobile device when motion is detected by a camera.
Remote Access & Mobile App
Access your NVR and view canlı və ya qeydə alınmış footage from anywhere using the free XMeye mobile application.
- Proqramı yükləyin: axtarın "XMeye" or "XMeye Pro" in your device's app store (Google Play for Android, App Store for iOS) or scan the QR code provided in the app section.
- Hesabı Qeydiyyatdan Keçin: Create a new user account within the XMeye app.
- Cihaz əlavə edin: Add your NVR to the app by scanning the NVR's QR code (usually found in the NVR's system information menu) or by manually entering its serial number.
- View Footage: Bir dəfə əlavə edə bilərsiniz view live camera feeds, playback recorded video, and receive motion alerts directly on your mobile device or PC.
Şəkil: Bitdiview of the XMeye Pro mobile application, demonstrating remote viewing capabilities across multiple devices like smartphones, tablets, and PCs.
Download the XMeye app: http://d.xmeye.net/Xmeye
Spesifikasiyalar
| Xüsusiyyət | Detal |
|---|---|
| Model nömrəsi | NVR1116PF-4K |
| Qətnamə | 16*4K 8MP (Access Bandwidth 72Mbps) |
| Video Çıxışı | 1x VGA, 1x HDMI |
| Audio Çıxış | 1 dəfə RCA |
| Şəbəkə Portu | 1x RJ45 10M/100M |
| USB portu | 2x USB2.0 |
| Streaming Specification | ONVIF/RTSP |
| Qeyd rejimi | Manual, Alarm, Motion Detection, Timing |
| Video Axtarış | Time, Date, Event, Channel Search |
| Güc | DC 12V |
| HDD interfeysi | SATA (Max 6TB) |
| Uyğun Tətbiq | XMeye |
| Məhsul Ölçüləri | 10.24 x 7.48 x 1.69 düym |
| Maddə Çəkisi | 2.2 funt sterlinq |
Problemlərin aradan qaldırılması
- Video çıxışı yoxdur:
- NVR-nin işə salındığından və güc adapterinin etibarlı şəkildə qoşulduğundan əmin olun.
- Verify that the VGA or HDMI cable is properly connected to both the NVR and the monitor/TV.
- Check the input source on your monitor/TV to ensure it matches the NVR's connection (VGA or HDMI).
- Kameralar Göstərilmir:
- Confirm that all IP cameras are powered on and properly connected to your network.
- Ensure the NVR is connected to the same network as your IP cameras.
- Check the NVR's camera management settings to ensure cameras are added and configured correctly. Verify IP addresses and login credentials for each camera.
- Confirm cameras are ONVIF compliant if not from the same brand.
- No Recording to Hard Drive:
- Ensure a hard drive is installed and properly connected inside the NVR.
- Verify that the hard drive has been formatted through the NVR's storage settings.
- Check the recording schedule and motion detection settings to ensure they are configured to record.
- Confirm the hard drive is not full. If it is, enable overwrite mode or replace the drive.
- Remote Access Issues (XMeye App):
- NVR-nin aktiv internet bağlantısı olduğundan əmin olun.
- Verify that the XMeye app is updated to the latest version.
- Double-check the NVR's serial number or QR code when adding the device to the app.
- Mobil cihazınızın sabit internet bağlantısı olduğundan əmin olun.
Zəmanət və Dəstək
For warranty information, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official SECULINK websayt. Satınalma qəbzinizi zəmanət iddiaları üçün satınalmanın sübutu kimi saxlayın.
