BAIZIFU 250W Electric Bike Conversion Kit User Manual

1. Məhsul bitdiview

The BAIZIFU 250W Electric Bike Conversion Kit is designed to transform a standard bicycle into an electric bike. This kit includes a brushless motor and a controller, suitable for 36V to 48V lithium and lead-acid batteries. It offers an efficient and convenient way to enhance your cycling experience.

2. Nə daxildir

• Electric Motor Unit
• Nəzarətçi
• Qaz Tutuşu
• Məftil qoşqu
• Montaj Aparatı
• Charger (if specified in package)
• E-Bike Accessory Kit

3. Uyğunluq və Vacib Qeydlər

Quraşdırmadan əvvəl lütfən yenidənview the following compatibility requirements and notes:

• Suitable for 36V-48V lithium and lead-acid batteries.
• Not suitable for bicycles with wheels under 16 inches.
• Not compatible with 4.0 tires, tubeless tires, or solid tires.
• The final performance is influenced by the bicycle tire type and installation quality.
• If your bicycle tires are aged, replace them before installation to prevent excessive wear.
• Deep tread pattern tires may increase the risk of skidding in wet conditions.

Bicycle Frame Compatibility

Ensure your bicycle frame meets the following criteria for proper installation:

Image: Bicycle frame compatibility guide. Check the distances (A, B, C, D) on your frame to ensure proper fit.

Refer to the image above to confirm your bicycle's frame dimensions are suitable. A minimum gap of 2.7cm is generally required for mountain bikes, cycling road bikes, and commuter bikes. Bicycles over 16 inches with a back fork are generally suitable. Bicycles without a back fork, with a spring in the back fork, or without an installation location are not suitable. 4.0 snow tires are also not supported.

Tire Type Compatibility

The most suitable tires for this conversion kit are bald tires or obscure tires. If your bicycle has a quick-release screw washer that is higher than 2.8cm, it may need to be removed for proper installation.

Şəkil: Məsamples of adapted bicycle models and suitable tire types, including a note about removing a quick-release screw washer if it's too high.

4. Quraşdırma və Quraşdırma

Follow these steps carefully for proper installation of your electric bike conversion kit.

Quraşdırma Addımları Bitdiview

Image: Visual guide showing the main installation steps, from preparing accessories to tightening screws and ensuring proper clutch line rotation.

1. Hazırlayın: Gather your bicycle and all kit accessories.
2. Clutch Switch: Pull the clutch switch to the snap position.
3. Install Baffle Plate: Install the fixed baffle plate and insert the quick screw into the fixed baffle.
4. Friction Wheel Gap: Ensure the distance between the friction wheel and the tire is 2-3mm.
5. Rotate and Tighten: Rotate and tighten the screws securely.
6. Clutch Line: When installing and turning the clutch line, ensure it is rotated in a large arc to prevent damage.

Mühüm Quraşdırma Mülahizələri

Şəkil: Yaxından views illustrating the clutch switch in ON (boost) and released (non-assist) states, and the required 2-3mm gap between the friction wheel and the tire.

• The clutch switch, when turned ON, engages the boost state.
• Ensure the friction wheel bites the tire tightly when engaged.
• When the clutch switch is released, the system is in a non-assist state.
• Maintain a 2-3mm gap between the friction wheel and the tire for optimal performance and to prevent wear.

Nəzarətçinin naqilləri

Proper wiring of the controller is crucial for the kit's functionality. Refer to the diagram and video below for guidance.

Image: Detailed wiring diagram for the controller, illustrating connections for the motor wire, power cable, on-off switch wire, and speed control line (throttle switch/handle).

Qeyd: Only use the provided controller with the BAIZIFU motor. Other controllers may not be compatible and could lead to malfunctions or damage.

5. Əməliyyat Təlimatları

Once installed, operate your electric bike by engaging the clutch switch for motor assistance. The motor provides power to assist your pedaling. Always ensure the friction wheel is properly engaged with the tire for effective power transfer.

Təhlükəsizlik tədbirləri

• Sürərkən həmişə dəbilqə və müvafiq qoruyucu vasitə taxın.
• Ətrafınızdakılara diqqət yetirin və bütün yol hərəkəti qaydalarına əməl edin.
• Exercise caution when riding in wet conditions, especially with deep tread pattern tires, as they may skid easily.
• Təhlükəsiz olduğundan əmin olmaq üçün bütün əlaqələri və montaj aparatlarını mütəmadi olaraq yoxlayın.

6. Baxım

To ensure the longevity and optimal performance of your BAIZIFU Electric Bike Conversion Kit, follow these maintenance guidelines:

• Təkər Vəziyyəti: Regularly inspect your bicycle tires for wear and tear. Replace severely aged tires before using the kit to prevent damage to the friction wheel and ensure safe operation.
• Friction Wheel: Keep the friction wheel clean and free from debris to maintain good contact with the tire.
• Əlaqələr: Periodically check all electrical connections and mechanical fasteners for tightness.
• Batareyaya qulluq: Follow the manufacturer's instructions for your specific 36V-48V battery for charging, storage, and general care.
• Təmizləmə: Clean the motor and controller units with a damp parça. Yüksək təzyiqli su şırnaqlarını birbaşa elektrik komponentlərinin üzərində istifadə etməkdən çəkinin.

7. Giderme

If you encounter issues with your electric bike conversion kit, consider the following common troubleshooting steps:

• Güc yoxdur:
  • Batareyanın doldurulduğunu və düzgün qoşulduğunu yoxlayın.
  • Verify all wiring connections are secure, especially the power cable to the controller and battery.
  • Ensure the on-off switch is in the 'ON' position.
• Motor işə düşmür:
  • Confirm the clutch switch is fully engaged.
  • Check the gap between the friction wheel and the tire (should be 2-3mm). Adjust if necessary.
  • Inspect the friction wheel for wear or damage.
• Fasiləli Güc:
  • Examine all wiring for loose connections or damage.
  • Ensure the battery has a stable charge.
• Qeyri-adi səslər:
  • Check for any foreign objects caught in the motor or friction wheel.
  • Bütün montaj aparatlarının möhkəm olduğundan əmin olun.

Bu addımlar problemi həll etmirsə, əlavə yardım üçün müştəri dəstəyi ilə əlaqə saxlayın.

8. Spesifikasiyalar

Detailed technical specifications for the BAIZIFU Electric Bike Conversion Kit:

Image: Detailed dimensions of the electric bike motor unit, showing length, width, and height measurements.

Image: Table showing controller specifications including voltage, power, waterproof status, and overheating protection, along with its dimensions.

9. Zəmanət və Dəstək

For any questions, technical assistance, or support regarding your BAIZIFU Electric Bike Conversion Kit, please contact our customer service. We are committed to providing timely responses and solutions to ensure your satisfaction.