1. Giriş
Thank you for choosing the MOUNTUP Ultrawide Single Monitor Arm, Model MU7007. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Please read this manual thoroughly before installation and keep it for future reference.
2. Təhlükəsizlik Məlumatı
Quraşdırma və istifadə zamanı aşağıdakı təhlükəsizlik tədbirlərinə əməl edin:
- Maksimum çəki tutumunu 33 funt (15 kq) aşmayın.
- Ensure your monitor's VESA pattern is compatible (75x75mm or 100x100mm).
- Verify that your desk surface is strong enough to support the combined weight of the monitor arm and your monitor.
- Always use the provided hardware and follow installation steps carefully.
- Quraşdırma zamanı uşaqları və ev heyvanlarını uzaq tutun.
- Adjust the gas spring tension only when the arm is in a horizontal position to prevent sudden movement.
3. Paketin məzmunu
Zəhmət olmasa, bütün komponentlərin mövcud olduğunu və zədələnmədiyini yoxlayın:
- Monitor Qolu Yığımı
- Çıxarılan VESA lövhəsi
- C-Clamp Baza
- Grommet Base (Optional)
- Montaj Avadanlıqları Dəsti (vintlər, şaybalar, arakəsmələr)
- Allen açarları
- Təlimat kitabçası
Image: All components of the MOUNTUP Ultrawide Single Monitor Arm, showing the main arm, the C-clamp mounting option, and the grommet mounting option.
4. Spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Model nömrəsi | MU7007 |
| Ekran ölçüsü uyğunluğu | 22 - 40 düym |
| Çəki tutumu | 6.6 - 33 funt (3 - 15 kq) |
| VESA Uyğunluğu | 75x75mm, 100x100mm |
| Montaj Seçimləri | C-Clamp, Grommet |
| Tilt diapazonu | +90° / -45° |
| Döner sıra | 180° (at arm joints), 360° (at VESA plate) |
| Fırlanma | 360° (Portretdən mənzərəyə) |
| Maksimum Uzatma | 22.5 düym (57.15 sm) |
| Max Height Adjustment | 19.75 düym (50.16 sm) |
| Material | Alaşımlı Polad |
| Rəng | Qara |
| USB Portları | 2 (integrated into base, USB cable not included) |
Image: The monitor arm supporting an ultrawide screen, highlighting its compatibility with screens up to 40 inches and a weight capacity of 30.9 lbs.
5. Quraşdırma və Quraşdırma
The MOUNTUP monitor arm offers two installation methods: C-Clamp and Grommet Mount.
5.1. Montaj üsulunuzu seçin
Determine which mounting method is suitable for your desk. The C-clamp is drill-free, while the grommet mount requires a hole in your desk.
5.2. C-Clamp Quraşdırma
- C-cl əlavə edinamp əsas dirəyin dibinə.
- Place the monitor arm assembly onto your desk edge.
- C-cl-ni sıxınamp screw until the arm is securely fastened to the desk.
5.3. Grommet Mount Installation (Optional)
- If your desk has a grommet hole, or you plan to drill one, attach the grommet base plate to the bottom of the main pole.
- Insert the pole through the grommet hole.
- Secure the base from underneath the desk using the provided hardware.
5.4. Attaching the Monitor
- Attach the detachable VESA plate to the back of your monitor using the appropriate VESA screws and spacers from the hardware kit. Ensure the screws are tightened securely.
- Slide the monitor (with the attached VESA plate) onto the arm's VESA head until it clicks into place.
- Tighten the security screw on the VESA head to prevent accidental detachment.
Image: A woman demonstrating the easy installation process, attaching a monitor to the arm using the detachable VESA plate, indicating setup can be completed within 15 minutes.
6. Əməliyyat və Tənzimləmələr
The MOUNTUP monitor arm offers extensive adjustability for optimal ergonomic positioning.
6.1. Gas Spring Tension Adjustment
The gas spring tension needs to be adjusted to match your monitor's weight. If the monitor rises too easily or drops, adjust the tension:
- Monitor raises up: Turn the adjustment screw (located on the arm joint) clockwise (towards the "-" direction) to reduce tension for lighter monitors.
- Monitor drops down: Turn the adjustment screw counter-clockwise (towards the "+" direction) to increase tension for heavier monitors.
- Əhəmiyyətli: Hold the arm in a horizontal position during adjustment to prevent sudden movement.
6.2. Hündürlüyün tənzimlənməsi
Once the gas spring tension is correctly set, you can freely move the monitor up and down to your desired height. The arm allows for a height adjustment range of 13 inches, with a minimum height of 6.7 inches and a maximum height of 19.7 inches from the desk surface.
6.3. Tilt Angle Adjustment
To adjust the monitor's tilt angle:
- Loosen the tilting bolt (turn towards the "-" direction) on the VESA head.
- Adjust the monitor to your desired tilt angle (+90° to -45°).
- Retighten the tilting bolt (turn towards the "+" direction) to secure the angle.
6.4. Swivel and Rotation
- Fırlanan: The arm joints allow for 180° swivel, and the VESA plate can swivel 360°, providing flexibility to share your screen or adjust viewbucaqlar.
- Fırlanma: The VESA plate supports 360° rotation, allowing you to switch your monitor between landscape and portrait orientations.
Image: Detailed instructions for adjusting the gas spring tension and the monitor's tilt angle using an Allen wrench.
Image: Visual representation of the monitor arm's full range of motion, including tilt (+90°/-45°), 360° swivel at arm joints, and 360° rotation for portrait/landscape viewing.
Image: A diagram illustrating the free height adjustment capabilities, showing minimum height (6.7"), maximum height (19.7"), and maximum extension (22.6").
6.5. Kabel idarəetməsi
The monitor arm features integrated cable management to keep your workspace tidy. Route your cables through the removable covers on the arm and the base. The base also includes two USB connectors for convenient access (USB cable not included).
Image: A visual guide demonstrating the routing of cables through the detachable USB connector integrated into the monitor arm's base, promoting a clutter-free desk.
7. Baxım
Regular maintenance ensures the longevity and optimal performance of your monitor arm:
- Təmizləmə: Qolu və əsasını yumşaq, d ilə silinamp parça. Aşındırıcı təmizləyicilərdən çəkinin.
- Bağlantıları yoxlayın: Periodically check all screws and bolts to ensure they are tight and secure. Retighten if necessary.
- Qaz Bulaq: The gas spring is designed for long-term use (over 20,000 cycles) and generally requires no specific maintenance beyond initial tension adjustment.
8. Giderme
If you encounter issues with your MOUNTUP monitor arm, refer to the following common problems and solutions:
8.1. Monitor Sags or Does Not Hold Position
- Səbəb: Qaz yayınının gərginliyi monitorun çəkisi üçün çox aşağıdır.
- Həlli: Increase the gas spring tension by turning the adjustment screw counter-clockwise (towards the "+" direction) as described in Section 6.1.
8.2. Monitor Floats Up or is Difficult to Push Down
- Səbəb: Qaz yayınının gərginliyi monitorun çəkisi üçün çox yüksəkdir.
- Həlli: Decrease the gas spring tension by turning the adjustment screw clockwise (towards the "-" direction) as described in Section 6.1.
8.3. Monitor Tilts Forward or Backward Unexpectedly
- Səbəb: The tilt angle bolt on the VESA head is loose.
- Həlli: Retighten the tilt angle bolt as described in Section 6.3.
8.4. Arm Feels Loose or Unstable
- Səbəb: Masa clamp or grommet mount is not sufficiently tightened.
- Həlli: Recheck and tighten the C-clamp or grommet mounting hardware securely.
9. Zəmanət və Dəstək
MOUNTUP stands behind the quality and durability of its products. This monitor arm comes with a 3-year support period, ensuring its strength and reliability.
For further assistance, technical support, or warranty claims, please contact MOUNTUP customer service through the retailer where you purchased the product or visit the official MOUNTUP webəlaqə məlumatı üçün sayt.
