Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Məhsul bitdiview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Əsas Xüsusiyyətlər:

• Yüksək hava axını dizaynı: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• İnteqrasiya edilmiş D-RGB İşıqlandırma: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Əvvəlcədən quraşdırılmış fanatlar: Includes three high-performance M25-140 D-RGB fans.
• Geniş soyutma dəstəyi: Supports up to 420mm radiators in the front and 360mm in the top.
• Geniş İnteryer: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Çevik Saxlama: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• Müasir Ön Giriş/Çıxış: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Quraşdırma və Quraşdırma

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Preparing the Chassis

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Anakartın quraşdırılması

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Güc Təchizatı Bölməsinin (PSU) Quraşdırılması

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Saxlama Cihazının quraşdırılması

The case offers extensive storage options:

• 2.5 düymlük SSD-lər: Up to 9 dedicated 2.5" drive bays are included.
• 3.5 düymlük sərt disklər: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Qrafik Kartın (GPU) Quraşdırılması

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Soyutma Sisteminin Quraşdırılması

The chassis supports various fan and radiator configurations:

• Azarkeş dəstəyi:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Top: 3x 120mm or 3x 140mm
  • Arxa: 1x 120mm və ya 1x 140mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Arxa: 120 mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Kabel idarəetməsi

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Quraşdırma Videoları

3. Əməliyyat Təlimatları

3.1 Ön I/O Paneli

Ön giriş/çıxış paneli əsas portlara və idarəetmə elementlərinə rahat giriş təmin edir:

• Güc düyməsi: Sisteminizi yandırmaq/söndürmək üçün.
• USB 3.0 Portları (x2): USB 3.0 cihazlarını birləşdirmək üçün.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Mikrofon/Qulaqlıq Combo Jack: Audio giriş və çıxış üçün.
• D-RGB rejimi düyməsi: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Rəng Düyməsi: D-RGB işıqlandırmasının rəngini dəyişir.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

3.2 D-RGB İşıqlandırmaya Nəzarət

The integrated D-RGB lighting can be controlled in two ways:

• Əl ilə idarəetmə: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Anakartın Sinxronizasiyası: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Baxım

Mütəmadi texniki xidmət kompüter komponentlərinizin optimal işləməsini və uzunömürlülüyünü təmin etməyə kömək edir.

• Dust Filtration: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Daxili Təmizlik: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Xarici Təmizlik: Xarici səthləri yumşaq bir parça ilə silin, damp parça. Aşındırıcı təmizləyicilərdən və ya həlledicilərdən çəkinin.

5. Giderme

Bu bölmə sizin kompüterinizin işində rastlaşa biləcəyiniz ümumi problemlərə toxunur.

5.1 Enerji ilə bağlı problemlər

• Sistem işə düşmür:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Verify the PSU switch is in the 'ON' position.
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Fan Noise or Malfunction

• Həddindən artıq fan səs-küyü:
  • Check for dust buildup on fan blades and clean if necessary.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• Fan fırlanmır:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Spesifikasiyalar

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Zəmanət və Dəstək

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks websaytına daxil olun və ya müştəri xidmətləri ilə əlaqə saxlayın.

Əlaqə məlumatı:

• Websayt: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., № 150, Jian 1st Rd., Zhonghe Dist. Yeni Taypey şəhəri 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).