Giriş
This manual provides essential information for the safe and effective use of your Lenz Lithium Pack rcB 1200. Please read it thoroughly before operating the device and retain it for future reference.
The Lenz Lithium Pack rcB 1200 is a lightweight, rechargeable battery pack designed to power various Lenz heated products, including socks, vests, bandages, and gloves. It offers adjustable heat settings and can be controlled via the pack itself or remotely using a smartphone via Bluetooth.
Paketin məzmunu
- 2 x Lithium Pack rcB 1200 (rechargeable battery packs)
- 1 x Global USB-Charger (100-240 VAC)
- 1 x USB Charging Cable with charging indicator
Təhlükəsizlik Təlimatları
Yaralanmanın və ya cihazın zədələnməsinin qarşısını almaq üçün həmişə aşağıdakı təhlükəsizlik tədbirlərinə əməl edin:
- Do not expose the battery packs to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F).
- Do not immerse the battery packs in water or other liquids.
- Do not disassemble, puncture, or modify the battery packs.
- Use only the provided charger and USB cable for charging.
- Uşaqların əli çatmayan yerdə saxlayın.
- If the battery pack shows signs of damage, swelling, or leakage, discontinue use immediately and dispose of it properly.
Quraşdırma
Batareya Paketlərinin Doldurulması
Before first use, fully charge both Lithium Pack rcB 1200 battery packs.
- Connect the USB charging cable to the global USB-charger.
- Plug the USB-charger into a standard electrical outlet (100-240 VAC).
- Connect the charging cable to the charging port on each Lithium Pack rcB 1200. The charging port is typically located on the side or bottom of the pack.
- The charging indicator on the USB cable will show the charging status. A full charge typically takes several hours.
- Once fully charged, disconnect the battery packs from the charger.
Image: Two Lenz Lithium Pack rcB 1200 battery packs. One pack shows the power button and heat level indicators. The other pack shows the snap connectors. Below, a battery pack is shown connected to a charging cable.
Attaching to Heated Products
The Lithium Pack rcB 1200 attaches to compatible Lenz heated products using press studs.
- Locate the press studs on your Lenz heated socks, vest, bandage, or gloves.
- Align the press studs on the battery pack with those on the heated product.
- Firmly press the battery pack onto the product until the studs click into place, ensuring a secure connection.
Əməliyyat Təlimatları
Powering On/Off and Adjusting Heat Levels (Manual Control)
Each battery pack has a power button and indicators for heat levels.
- Yandırmaq üçün: Press and hold the power button (usually marked with a 'G' or power symbol) on the battery pack for a few seconds until the indicator lights illuminate.
- İstilik səviyyəsini tənzimləmək üçün: Briefly press the power button to cycle through the three available heat settings. The indicator lights (1, 2, 3) will show the current heat level.
- Level 1: Lowest heat setting.
- Level 2: Medium heat setting.
- Level 3: Highest heat setting.
- Söndürmək üçün: Press and hold the power button again for a few seconds until all indicator lights turn off.
Smartphone Control (Bluetooth Smart Ready)
The Lithium Pack rcB 1200 can be controlled remotely via a smartphone application.
- Download the official Lenz Heat App from your smartphone's app store (iOS or Android).
- Smartfonunuzda Bluetooth-un aktiv olduğundan əmin olun.
- Open the Lenz Heat App and follow the on-screen instructions to pair your Lithium Pack rcB 1200 battery packs. The app will guide you through the pairing process.
- Once paired, you can use the app to power the packs on/off, adjust heat levels, and monitor battery status.
Baxım
Təmizləmə
To clean the battery packs, gently wipe them with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the packs are completely dry before storing or recharging.
Saxlama
When storing the battery packs for extended periods, ensure they are charged to approximately 50-70% capacity. Store them in a cool, dry place away from direct sunlight and extreme temperatures. Recharge them every 3-6 months to maintain battery health.
Problemlərin aradan qaldırılması
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Battery pack not turning on. | Batareya bitib. | Batareya paketini tam doldurun. |
| Battery pack not charging. | Charger or cable faulty; improper connection. | Ensure charger and cable are properly connected. Try a different USB port or outlet. Verify charger is functional. |
| Heated product not heating. | Battery pack not securely attached; battery pack not powered on; battery pack depleted. | Ensure battery pack is securely attached via press studs. Power on the battery pack. Charge the battery pack. |
| Bluetooth vasitəsilə qoşulmaq mümkün deyil. | Bluetooth not enabled on phone; battery pack not in pairing mode; app issue. | Ensure Bluetooth is on. Restart battery pack and phone. Reinstall Lenz Heat App. Follow app pairing instructions carefully. |
Spesifikasiyalar
- Model: Lenz Lithium Pack rcB 1200
- Batareya növü: Doldurulan litium-ion
- Uyğunluq: All Lenz heat socks, heat vest, heat bandage, heat glove 4.0, and LED system.
- Nəzarət: 3 heat settings via pack, or remote control via smartphone (Bluetooth smart ready).
- Şarj cihazı: Global USB-Charger (100-240 VAC)
- Doldurma vaxtı: Approximately 3-4 hours (from empty to full)
- Əməliyyat vaxtı: Up to 14 hours (depending on heat setting and external conditions)
- Ölçülər: Approximately 4 x 3 x 0.5 inches (per pack)
- Çəki: Approximately 1.95 pounds (total for two packs)
Zəmanət və Dəstək
For warranty information and technical support, please refer to the official Lenz websaytına daxil olun və ya birbaşa müştəri xidmətləri ilə əlaqə saxlayın. Zəmanət iddiaları üçün satınalma sübutunuzu saxlayın.
İstehsalçı: Lenz
Websayt: www.lenzproducts.com (Misamplink, faktiki link fərqli ola bilər)
