WALI FTM-2 Full Motion TV Wall Mount Instruction Manual

1. Məhsul bitdiview

The WALI FTM-2 Full Motion TV Wall Mount is designed to securely hold most flat and curved screen televisions ranging from 32 to 70 inches. This mount offers extensive adjustability, including tilt, swivel, and extension, allowing for optimal viewing angles from various positions in a room. Constructed from reinforced cold-rolled steel, it ensures durability and stability for your television.

2. Əhəmiyyətli Təhlükəsizlik Məlumatı

XƏBƏRDARLIQ: Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified installer. Improper installation may cause serious injury or damage.

• Çəki tutumu: Maksimum 88 funt (40 kq) çəki tutumunu aşmayın. Bu montaj yalnız göstərilən maksimum çəkilərlə istifadə üçün nəzərdə tutulub. Göstərilən maksimum çəkilərdən daha ağır məhsullarla istifadə qeyri-sabitliyə və mümkün zədələnməyə səbəb ola bilər.
• Divar növü: This mount is designed for installation on vertical wood studs, solid concrete walls, or brick walls. Yalnız drywall üzərinə quraşdırmayın. Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware.
• VESA Uyğunluğu: Televizorunuzun VESA montaj nümunəsinin dəstəklənən diapazonda (100x100mm - 400x400mm) olduğundan əmin olun.
• Alətlər: Use appropriate tools for installation. Always wear safety gear, including eye protection.
• Uşaqlar: Keep children away from the installation area. Small parts may be a choking hazard.

Image: The mount is constructed from reinforced cold-rolled steel, tested to support up to 88 lbs, ensuring structural integrity and safety for your television.

3. Paketin məzmunu

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact WALI customer support.

• WALI FTM-2 TV Wall Mount (1 unit)
• Montaj Avadanlıqları Dəsti (müxtəlif vintlər, şaybalar, arakəsmələr, lövbərlər)
• İstifadəçi Təlimatı (bu sənəd)

Image: All necessary hardware for installation is included, such as various bolts, washers, spacers, and wall anchors. A spirit level is also provided to assist with accurate mounting.

4. Uyğunluğun yoxlanılması

Before installation, confirm your television and wall meet the following requirements:

• TV Ölçüsü: Compatible with most 32 to 70 inch flat or curved screen TVs.
• TV çəkisi: Televizorunuzun çəkisi 40 kq-dan çox olmamalıdır.
• VESA nümunəsi: The mounting holes on the back of your TV must match VESA patterns from 100x100mm to 400x400mm.
• Divar növü: Suitable for 12" or 16" wood studs, concrete walls, and brick walls. Not for drywall-only installation.

Image: This diagram outlines the four key compatibility checks: TV weight (up to 88 lbs), VESA pattern (100x100mm to 400x400mm), TV size (32-70 inches), and suitable wall types (wood studs, concrete, brick). Installation on drywall alone is not supported.

5. Quraşdırma Təlimatları

Follow these steps carefully for a secure installation. It is recommended to have two people for installation.

Addım 1: Mötərizəni divara yapışdırın

1. Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable.
2. Mark the drill holes for the wall plate. Ensure the marks are level using a spirit level.
3. Drill pilot holes at the marked locations. For wood studs, use a 5/32 inch (4mm) drill bit. For concrete/brick walls, use a 3/8 inch (10mm) drill bit and insert wall anchors.
4. Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.

Step 2: Attach Plate to TV

1. Cızıqların qarşısını almaq üçün televizorunuzu üzü aşağı, yumşaq, təmiz bir səthə qoyun.
2. Televizorunuzun arxasındakı VESA montaj deliklərini müəyyən edin.
3. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
4. Attach the TV brackets to the back of your TV. Ensure they are securely fastened but do not overtighten.

Step 3: Hang TV on Bracket

1. With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
2. Ensure the TV is centered and level.
3. Secure the TV to the wall plate using the safety screws or locking mechanisms provided.

6. Adjustments (Operating)

The WALI FTM-2 mount offers flexible adjustments to achieve your desired viewbucaq.

• Əymək: The TV can be tilted +3° upwards and -15° downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
• Fırlanan: The mount allows for a ±60° swivel (left and right) depending on TV size and wall distance. Gently push or pull the TV to the desired swivel angle.
• Düzləşdirmə: After installation, if the TV is slightly unlevel, you can adjust it by ±3°. Loosen the leveling screws, adjust the TV, and re-tighten.
• Uzatma/geri çəkmə: The mount extends from 2.6 inches (6.6 cm) to 14 inches (35.6 cm) from the wall. Gently pull the TV forward or push it back to adjust the distance.

Image: This diagram shows the full range of motion: 15 degrees of tilt, 60 degrees of swivel, extension up to 14 inches from the wall, and 4 degrees of leveling adjustment for a perfect viewtəcrübə.

7. Baxım

Müntəzəm texniki qulluq televizorunuzun divar montajının uzunömürlülüyünü və təhlükəsiz işləməsini təmin edir.

• Dövri yoxlamalar: Periodically check that all screws and connections are tight and secure. Re-tighten if necessary.
• Təmizləmə: Montajı yumşaq, quru bir parça ilə təmizləyin. Finişə zərər verə biləcək aşındırıcı təmizləyicilərdən və ya həlledicilərdən çəkinin.
• Hərəkət edən hissələr: The articulating arms are designed for smooth movement. No lubrication is typically required. If movement becomes stiff, check for obstructions or loose components.

8. Giderme

Quraşdırma zamanı və ya sonra problemlərlə qarşılaşsanız, aşağıdakı ümumi problemlərə və həllərə baxın:

• TV səviyyəli deyil: Use the leveling adjustment feature (refer to Section 6) to correct the angle. Ensure the wall plate was installed level initially.
• Dağ qeyri-sabit hiss edir: Double-check all wall and TV attachment screws to ensure they are securely tightened. Verify that the wall type is appropriate and that the TV weight does not exceed the mount's capacity.
• Televizor montaja uyğun gəlmir: Re-check your TV's VESA pattern against the mount's specifications (refer to Section 4). Ensure you are using the correct screws and spacers for your TV model.
• Difficulty moving the arms: Ensure no cables are snagged or obstructing movement. Check for any overtightened bolts that might restrict articulation.

If problems persist, contact WALI customer support for assistance.

9. Spesifikasiyalar

10. Zəmanət və Müştəri Dəstəyi

WALI products are designed for quality and reliability. For warranty information or technical assistance, please contact WALI customer support.

WALI is committed to providing dedicated product support and aims to respond to inquiries within 12 hours.

• Əlaqə: Refer to the WALI official webən aktual əlaqə məlumatı üçün sayt və ya məhsul qablaşdırması.
• Satınalma sübutu: Zəmanət iddiaları üçün satınalma sübutunuzu özündə saxlayın.