FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank User Manual

1. Giriş

Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.

2. Təhlükəsizlik Məlumatı

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• Donmuş batareyanı işə salmağa çalışmayın.
• Düzgün polarite əlaqəsini təmin edin (qırmızı clamp müsbət, qara clamp to negative). Reverse polarity can cause damage.
• Ağıllı cl-yə icazə verməyinamps to touch each other when connected to the jump starter.
• Cihazı uşaqlardan uzaq tutun.
• Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• Cihazı sökməyin və ya dəyişdirməyin.
• Use only the provided smart clamps and charging cables.
• If the device becomes excessively hot during use, disconnect it immediately.

Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.

3. Paketin məzmunu

Bütün əşyaların paketdə olduğunu yoxlayın:

• FLYLINKTECH BD10 Jump Starter Unit
• Ağıllı Batareya Clamps
• USB-C-dən USB-C kabelinə
• USB-A-dan USB-C kabelinə
• 12V DC Car Charger Adapter
• İstifadəçi təlimatı
• Saxlama qutusu

Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.

4. Quraşdırma və Doldurma

4.1 İlkin ödəniş

Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.

• Connect the provided USB-C cable to the jump starter's USB-C input port.
• Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
• The LED screen will display the charging status and battery percentage.

4.2 Charging Times

Note: A 45W wall charger is not included in the package.

Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.

5. Əməliyyat Təlimatları

5.1 Avtomobili işə salmaqla tullanmaq

The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.

1. Kifayət qədər ödəniş təmin edin: Check the jump starter's LED screen to ensure it has at least 50% charge.
2. Smart Cl-ni qoşunamps: Insert the blue plug of the smart clamps into the jump starter's 12V output port. Ensure a firm connection.
3. Avtomobilin akkumulyatoruna qoşulun:
   • əlavə edin qırmızı (+) clamp avtomobilin müsbət akkumulyator terminalına.
   • əlavə edin qara (-) clamp to the vehicle's negative battery terminal.
4. Yoxlama göstəricisi: Ağıllı clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
5. Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
6. Avtomobili Başlat: Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
7. Cl çıxarınamps: Avtomobil işə düşən kimi dərhal ağıllı cihazı çıxarınamps from the car battery, then disconnect them from the jump starter.

Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.

Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.

5.2 Power Bank funksiyası

The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.

• USB1 Çıxış: Up to 18W (max)
• USB2 Çıxış: Up to 18W (max)
• USB-C Çıxışı: 45 Vt-a qədər (PD)

Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.

Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.

5.3 LED Fənər

The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.

• Press and hold the flashlight button to turn on the constant light.
• Press the button again to cycle through SOS and strobe modes.
• Söndürmək üçün yenidən basıb saxlayın.

Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.

5.4 Informative LED Screen

The 6.0-inch LED screen provides real-time information about the device's status:

• Batareya Səviyyəsi: Qalan batareya faizini göstərirtage.
• IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
• Wattage Ekran: Indicates the power (W) being drawn or supplied.
• Səhv Xəbərdarlıqları: Displays specific error codes or symbols if an issue occurs.

Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.

6. Baxım

• Müntəzəm olaraq doldurun: To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
• Yaddaş: Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
• Təmizləmə: Cihazı yumşaq, quru parça ilə silin. Sərt kimyəvi maddələr və ya aşındırıcı materiallar istifadə etməyin.
• Clamp Qulluq: Ağıllı cl-ni təmin edinamps are clean and free of corrosion before and after each use.

7. Giderme

The device features multiple alarm situations indicated by audible signals and screen displays:

• Aşağı Voltage Mühafizə: Audible signal "3". Recharge the device.
• Xarici cildtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
• Qısa Qapanmadan Müdafiə: Audible signal "5". Check clamp connections for short circuits.
• Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
• Həddindən artıq cərəyandan qorunma: Audible signal "7". Reduce load or check connections.
• Yüksək/Aşağı Temperatur Siqnalı: Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
• Reverse Connection: Audible signal "9". Correct the clamp polarite.

Şəkil 7.1: Bitdiview of the device's multi-alarm system, indicating various protection states with unique audible signals.

Bu addımları yerinə yetirdikdən sonra problemlər davam edərsə, müştəri dəstəyi ilə əlaqə saxlayın.

8. Spesifikasiyalar

Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).

9. Zəmanət və Dəstək

FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH websayt. Zəmanət məqsədləri üçün satın alma sənədinizi saxlayın.