1. Məhsul bitdiview
The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.
Əsas Xüsusiyyətlər:
- Bluetooth 4.1 and Universal Intercom for broad compatibility.
- Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
- Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
- Supports up to 4 riders for group communication.
- Smartphone pairing for music, GPS navigation, and phone calls.
- Talk time of 12 hours on a single charge.
Şəkil 1.1: Ön view of the Sena 10S Motorcycle Bluetooth Headset.
2. Paketin məzmunu
The Sena 10S Communication System package typically includes the following items:
- Sena 10S Headset Unit(s)
- Dinamik dəsti
- Boom Mikrofon
- Simli Mikrofon
- Montaj Clamp Kit
- USB güc və məlumat kabeli
- Audio Kabel
- Dinamiklər üçün Velcro Yastiqciqlar
- Mikrofon süngərləri
Figure 2.1: All components included in the Sena 10S package.
3. Quraşdırma və Quraşdırma
3.1 Cihazın doldurulması
Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.
Şəkil 3.1: Yan view of the Sena 10S unit, showing the USB charging port.
3.2 Mounting on a Helmet
The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:
- Cl-nin arxasındakı vintləri gevşetinamp vahid.
- Cl-i sürüşdürünamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
- Tighten the screws to secure the clamp.
- Attach the main headset unit to the clamp.
- Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
- Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.
Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.
4. Əməliyyat Təlimatları
4.1 Yandırma/Söndürmə
- Güc Aktivdir: Press and hold the Phone Button and the Jog Dial for 1 second.
- Söndürmək: Tap the Phone Button and the Jog Dial simultaneously.
4.2 Səs səviyyəsinə nəzarət
Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.
4.3 Bluetooth Pairing (Smartphone)
To pair your smartphone with the Sena 10S for music, GPS, and phone calls:
- With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
- On your smartphone, enable Bluetooth and search for devices.
- Select 'Sena 10S' from the list of found devices.
- If prompted, enter '0000' for the PIN.
4.4 İnterkom Əlaqəsi
The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.
- Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
- Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.
4.5 Music Streaming and Phone Calls
- Musiqini Oynat/Pause: Jog Dial düyməsini 1 saniyə basıb saxlayın.
- Zəngə Cavab Vermək/Bitirmək: Telefon düyməsinə toxunun.
- Səsli yığım: Telefon düyməsini 3 saniyə basıb saxlayın.
5. Baxım və qulluq
To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:
- Keep the device dry. Moisture can damage internal circuits.
- Cihazı təmizləmək üçün sərt kimyəvi maddələr, təmizləyici həlledicilər və ya güclü yuyucu vasitələrdən istifadə etməyin.
- Clean the microphone and speaker grilles gently with a soft, dry cloth.
- İstifadə edilmədikdə cihazı sərin, quru yerdə saxlayın.
- Batareyanın sağlamlığını qorumaq üçün istifadə olunmasa belə, batareyanı müntəzəm olaraq doldurun.
6. Giderme
If you encounter issues with your Sena 10S, try the following steps:
- Güc yoxdur: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
- Səs yoxdur/aşağı səs: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
- İnterkom qoşulmur: Verify both units are powered on and within range. Re-attempt intercom pairing.
- Bluetooth bağlantısının kəsilməsi: Ensure your paired device is within range. Try re-pairing the device.
- Cihazın sıfırlanması: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).
7. Texniki spesifikasiyalar
| Xüsusiyyət | Spesifikasiya |
|---|---|
| Məhsul Ölçüləri | 10.63 x 6.69 x 3.66 düym |
| Maddə Çəkisi | 1.65 funt sterlinq |
| Element Model nömrəsi | 10S |
| Batareyalar | 1 Litium Polimer batareya tələb olunur |
| Brend | Sena |
| Rəng | Qara |
| Kanalların sayı | 4 |
| Xüsusi Xüsusiyyət | Mikrofon Daxildir |
| Tezlik diapazonu | 20 Hz - 20,000 Hz |
| Danışıq Aralığı Maksimum | 1.6 Kilometr |
| Suya davamlılıq səviyyəsi | Suya davamlı |
| Danışıq vaxtı | 12 saat |
| Doldurma vaxtı | 3 saat |
8. Rəsmi Məhsul Videosu
Video 8.1: Bitdiview of the Sena 10S Motorcycle Bluetooth Headset, highlighting its key features and benefits for motorcycle riders. This video demonstrates the product's design, communication capabilities, and ease of use.
9. Zəmanət və Dəstək
For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.
