1. Giriş
This manual provides detailed instructions for the installation, operation, and maintenance of your BAIZIFU 36V/48V Waterproof Brushless Motor Speed Controller. This controller is designed for electric bicycles and scooters, supporting motors with power ratings from 150W to 300W. Please read this manual thoroughly before use to ensure proper function and safety.
2. Təhlükəsizlik tədbirləri
- Hər hansı quraşdırma, texniki xidmət və ya nasazlıqların aradan qaldırılmasından əvvəl həmişə enerjini ayırın.
- Ensure all connections are secure and correctly wired to prevent short circuits or damage.
- Giriş həcminin olduğunu yoxlayıntage (36V/48V) matches your battery system.
- Avoid exposing the controller to extreme temperatures or direct impact.
- Although waterproof, avoid submerging the controller in water for extended periods.
- Hər hansı bir addımdan əmin deyilsinizsə, ixtisaslı texniki ilə məsləhətləşin.
3. Məhsul bitdiview
3.1 Xüsusiyyətlər
- 36V/48V Rated Voltage
- 150-300 Watts Rated Power
- Designed for electric bicycles and scooters, including mechanical or electric forklifts.
- Brushless Controller technology for efficient operation.
- Waterproof design for enhanced durability.
3.2 Spesifikasiyalar
| Atribut | Dəyər |
|---|---|
| Brend | BAIZIFU |
| Cildtage | 36V / 48V |
| Nominal güc | 150W - 300W |
| Material | Alüminium |
| Maddə Çəkisi | 8 unsiya (0.5 funt) |
| Paket Ölçüləri | 3 x 3 x 2.1 düym |
| Zəmanət | 1 il |
3.3 Məhsul Komponentləri
4. Quraşdırma təlimatı
Follow these steps to correctly install your brushless motor controller. Refer to the wiring diagram for visual guidance.
- Connect Motor Wire: Connect the motor wire from the controller to your motor. Ensure the connectors are firmly seated.
- Elektrik kabelini birləşdirin: Connect the power cable from the controller to your battery. Observe correct polarity (red to positive, black to negative).
- Connect Speed Control Line: Attach the speed control line to your throttle switch or handle.
- Connect Switch Wire: Connect the switch wire to your on-off switch.
- Təhlükəsiz Bağlantılar: Double-check all connections for tightness and correct placement.
- Montaj Nəzarətçisi: Securely mount the controller in a suitable location on your electric bicycle or scooter, ensuring it is protected from physical damage and excessive heat.
4.1 Quraşdırma Videosu
Video: This video demonstrates the process of connecting the brushless motor and controller to a power source, illustrating the wiring steps for a functional setup.
5. Əməliyyat Təlimatları
Once the controller is correctly installed, follow these steps to operate your electric vehicle:
- Güc Aktivdir: Turn on the main power switch connected to the controller.
- Qaza Nəzarət: Use the throttle handle or switch to control the motor speed. Gradually increase the throttle for smooth acceleration.
- Monitor Performansı: Pay attention to the motor's response and any unusual sounds during operation.
- Söndürmək: When finished, turn off the main power switch to disconnect power to the controller and motor.
6. Baxım və qulluq
- Daimi Yoxlama: Periodically check all wiring connections for any signs of wear, corrosion, or looseness.
- Təmizləmə: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Avoid using harsh chemicals.
- Ətraf Mühitin Mühafizəsi: While waterproof, protect the controller from prolonged exposure to heavy rain or direct water jets.
- Yaddaş: If storing the vehicle for an extended period, ensure the controller is disconnected from the battery.
7. Problemlərin aradan qaldırılması üçün təlimat
If you encounter issues with your motor controller, refer to the table below for common problems and solutions.
| Problem | Mümkün Səbəb | Həll |
|---|---|---|
| Motor başlamır | No power, loose connections, faulty switch. | Check battery charge, verify all wiring connections, test the on-off switch. |
| Motor fasilələrlə işləyir | Loose wiring, intermittent power supply, throttle issue. | Inspect all connections, check battery output, test throttle functionality. |
| Motor runs but no speed control | Faulty throttle, speed control line disconnected. | Check speed control line connection, test or replace throttle. |
| Controller gets excessively hot | Overload, poor ventilation, short circuit. | Reduce load, ensure proper airflow around controller, check for short circuits in wiring. |
Bu həll yollarına cəhd etdikdən sonra problem davam edərsə, müştəri dəstəyi ilə əlaqə saxlayın.
8. Zəmanət və Dəstək
8.1 Zəmanət Məlumatı
This BAIZIFU Brushless Motor Controller comes with a 1 il zəmanət from the date of purchase. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.
To claim warranty service, please retain your proof of purchase and contact our customer support team.
8.2 Müştəri dəstəyi
For technical assistance, troubleshooting, or warranty inquiries, please contact BAIZIFU customer support through the retailer's platform or the official brand website. Please have your product model number (B0CJ3DPVC6) and purchase details ready when contacting support.